Amazing videos, many thanks for sharing your excellent work and wonderfully clear techniques in producing these lures . I am an avid subscriber eagerly waiting for the next video. Could you please tell me if you produced a sequel to this part 1 of the build as I can’t seem to find it
Thanks,Barry james!. I uploaded the video of step-2 to CZcams last night. *How to make a Mini Pencil Bait (Step-2): czcams.com/video/z8XHqjSEJrE/video.html .
I just discovered your channel-and immediately subscribed. EXCELLENT work, on the lures and the filming! One thing about this footage puzzled me: You usually show EVERY detail, but here you didn't demonstrate how you made the complex, precise bends in the internal wire. Could you PLEASE show us that in another video?
Hi, Chris Cornell, Thank you very much!. In this video, I skipped the wire bending to save time. It's not perfect, but the video below shows a little of the how to bending wire. *How to make a 95 Balsa Wood Minnow (Step-1) : czcams.com/video/8KqUnBq-0vg/video.html .
@@haru834 I truly appreciate your reply. I think, though, that you gave me the wrong link! But I went back through MANY of your lure-making videos and did at last find one that showed the entire wire-bending process: czcams.com/video/8gFZCdZoEWM/video.html (minute 4:02) It might be good, however, to tell viewers like me precisely what pliers you use to bend the wire; that seems to be important to achieving the right bends. I hope this helps others who follow your excellent work!
Thank you very much. This lure is drilled with about 8mm and 7mm holes. However, the optimal hole diameter varies from builder to builder. Therefore, I think it is best to decide the size of the hole according to the situation.
great videos haru, really really good. your channel is amazing. I think there is a mistake in your pencil template. It says 6mm balsa wod but i think you have used 8mm balsa wood in trhis one. thank you for your videos. Keep on going! cheers
Thank you very much. After reading your message, I checked the lure and the template, but I still think I am making it using 6mm balsa sheet. I will continue to make lures, so please support me.
Haru can you please tell me what the size of these split shots is. You say it's around 2.3. It's American unit I suppose. what is it ? #5 is 2.56 grams/water gremlin, and small one is BB size 0.56 grams/ water gremlin. Its hard to find american unit split shots in Europe.
Thank you for your message. Sorry for the delay in replying. My guess is that there are two different weights for the No-5 size of Water-gremlin. On the US website, the No-5 size is listed as weighing 2.54 grams, and the one I bought in Japan 10 years ago had the same weight. However, strangely enough, about five years ago, weights of about 2.3 grams began to circulate in Japan. And now only 2.3 grams can be found. I do not know why the weight of the water gremlins sold in Japan differs from that in the U.S., but hopefully the grams will be standardized.
Thank you for your message. Sorry for the delay in answering. I have never made a lure out of plywood and pine, but I have made one out of cypress. I was able to make this Pencil Bait successfully by adding about 1 to 1.5 grams of weight in the tail, and about 0.3 grams in the front.
What is the length of the lure body template?. This lure template has a body length of about 72 mm (about 2.8 inches). If the sizes are different, try changing the settings on your printer.
Hallo, Haru san, Love your work, so detail, and seem very easy for beginner to try make it ones, I'm sorry, i've print this pencil bait template , but the length, somehow become 10cm, Haru san, could you make the template for minnow,, "Exodus Kraken 59s"?, And please make video "how to make that lure, step by step, Can't wait for your another work, Thank you, 🙂
Hello anas, Thanks for your question. The reason why the pencil bait is printed large is probably due to the printer settings. Please use the ruler at the bottom of the template as a guide to set your printer and print. I am making a prototype of a small sinking minnow, However, I think it will take some time to complete.
I've never used basswood, so I don't know the details, but I think it probably won't works. This bait was prototyped using the balsa wood, so if it were made of basswood, the lure action might be different.
Hello!. Thanks for the question. The PDF for the lure is available at this URL. If you set your printer so that the ruler drawn on the bottom left of the template is the correct length, you can print it to the exact size. *Mini Pencil Bait PDF: drive.google.com/file/d/1jICys2LxITjslZA6MNuUWJ6lsp0vwyxr/view?usp=sharing .
Hello Руслан Яремчук!, This lure template can be get from the video description or from this link. *Balsa Wood Pencil bait: drive.google.com/file/d/1jICys2LxITjslZA6MNuUWJ6lsp0vwyxr/view?usp=sharing .
@@haru834 Thank you very much. I myself am from Ukraine, so excuse my pronunciation a little wrong. Tell me, do you draw such drawings yourself, or take them from the Internet? I would like to have different wobblers in my collection. Is there such a site with drawings?
Good evening, Илия Топуров!. Because this lure has rattle ball, the lure body sit on the side slightly as the rattle ball moving. In most cases, attaching a hook will solve this problem, but if the lure still sit on the side after attaching the hook, the following are possible causes. *One side of the lure body has been shaved off too much, and the left and right sides are not balanced evenly. *The hole for the lure weight (or rattle ball) is too deep on one side. *It's rare, but it is also possible that the hook and the lure are not balanced properly. Lure manufacturers have a lineup of hooks of various shapes and weights, so depending on the hooks you attaching, you may not be able to maintain the balance of the lure. I think you can solve the problem of the lure sit on side by making the shape and buoyancy of the lure equal on each side when viewed from the front.
Dziękuję. Wykonana praca jest na najwyższym poziomie oraz inspiruje do samodzielnego wykonania przynety
I really like this lure thanks for sharing
Teşekkürler Haru,verdiğin detaylı bilgiler için
I love this lures!! Thanker you!!
Very good for casting Toman
チヌにも良さそう🤩
Je suis en france et j adore ce que vous faite bravo 👏👏
素晴らしい
criatividade alien👽
Sin palabras queda muy bonito saludos desde Colombia
Thanks for this video bro.I just want to make a topwater lure .nice work
Parabéns que maravilha de trabalho amigo 👍😃👏👏👏👏 show incrível 🙏🙏🙏 que Deus abençoe sempre teu trabalho
love your work, been following you for years now
Thank you. .
Always the best.
Really, haru 834 you are a master of his trade, excellent work!! 👌👌
バルサだと、加工しやすくて、動きもクイックでいいですね。
ロングキャストも可能なので、キャストするのも心地いいトップウォーターに仕上がりました(^^)b
thank u
Belo trabalho. Muito técnico, faz parecer fácil. Parabéns, ganhou um inscrito. Saudações do Brasil 👏👏👏
Thank u so much bro!
the videos are very inspiring to me
One of the best channels hallo bro wish you best
I had to learn news from you long time
Thank you for Tutorial a Mini Pencil
Fenomenal papá!! Saludos aquí Luis de cuatro plomo ...alto nivel Master...una magia ....éxitos!!
Спасибо!!! 👏👏👏💪💪💪💯💥
Thanks🙏👍👍
Complimenti sei molto bravo 🖒🖒🖒
The movement is excellent perfect on the making tynx for sharing bro 👌👍💪
สุดยอดครับชอบๆๆๆ
Excellent
Добрый вечер благодарю за видео зачёт удачу вам...,👍👍👍👍👍
Sangat memukau😍
I made one ! Great job !
非常喜欢您的作品就是有点难学会哈哈多多指教
Nice 🎣
Nice lure...👍
Wtd pancil
Perfect deal...
Bravo pour cette belle vidéo 👍🤣
Super 👍
Good job! I like your videos.
Amazing videos, many thanks for sharing your excellent work and wonderfully clear techniques in producing these lures . I am an avid subscriber eagerly waiting for the next video.
Could you please tell me if you produced a sequel to this part 1 of the build as I can’t seem to find it
Thanks,Barry james!. I uploaded the video of step-2 to CZcams last night.
*How to make a Mini Pencil Bait (Step-2): czcams.com/video/z8XHqjSEJrE/video.html .
super
Супер 🙌 однозначно Like 👍👍👍👍👍.....
Very nice
Waw very good yes
very helpful info my friend 👍👍👍👍🙏😁
What I meant to say , is there a part 2 . If so where can I find it . Please keep making these superb videos , some of the very best on CZcams.
イイね👍
Круто !
Smith D-contact??????????.?
Beautiful.
I could watch this for hours.
Very relaxing.
Mantap keren
Nice bro
great job! I struggle to do it and every time the lure lands on one side. Do you know why this happens?
how i can make topwater walking dog but instead be on TOPwater its swims 10-30 centimeters deep>?
I truly like your content. How do I use your google drive to print your templates?
厉害
I just discovered your channel-and immediately subscribed. EXCELLENT work, on the lures and the filming! One thing about this footage puzzled me: You usually show EVERY detail, but here you didn't demonstrate how you made the complex, precise bends in the internal wire. Could you PLEASE show us that in another video?
Hi, Chris Cornell, Thank you very much!. In this video, I skipped the wire bending to save time. It's not perfect, but the video below shows a little of the how to bending wire.
*How to make a 95 Balsa Wood Minnow (Step-1) : czcams.com/video/8KqUnBq-0vg/video.html .
@@haru834 I truly appreciate your reply. I think, though, that you gave me the wrong link! But I went back through MANY of your lure-making videos and did at last find one that showed the entire wire-bending process: czcams.com/video/8gFZCdZoEWM/video.html (minute 4:02) It might be good, however, to tell viewers like me precisely what pliers you use to bend the wire; that seems to be important to achieving the right bends. I hope this helps others who follow your excellent work!
Gud
I made the bait. Is it normal to sit on the side
Please make a thailand jumpfrog lure
Boas ideias Saudações do Marrocos, espero que todos os pescadores possam trocar ideias em um canal
👍👍👍
Congratulations, beautiful work and excellent video! Could you please tell me the diameter of the circular holes in the wood?
Thank you very much. This lure is drilled with about 8mm and 7mm holes. However, the optimal hole diameter varies from builder to builder. Therefore, I think it is best to decide the size of the hole according to the situation.
great videos haru, really really good. your channel is amazing. I think there is a mistake in your pencil template. It says 6mm balsa wod but i think you have used 8mm balsa wood in trhis one. thank you for your videos. Keep on going! cheers
Thank you very much. After reading your message, I checked the lure and the template, but I still think I am making it using 6mm balsa sheet.
I will continue to make lures, so please support me.
do you have a template for 110mm size?
Haru can you please tell me what the size of these split shots is. You say it's around 2.3. It's American unit I suppose. what is it ? #5 is 2.56 grams/water gremlin, and small one is BB size 0.56 grams/ water gremlin. Its hard to find american unit split shots in Europe.
Thank you for your message. Sorry for the delay in replying.
My guess is that there are two different weights for the No-5 size of Water-gremlin.
On the US website, the No-5 size is listed as weighing 2.54 grams, and the one I bought in Japan 10 years ago had the same weight.
However, strangely enough, about five years ago, weights of about 2.3 grams began to circulate in Japan. And now only 2.3 grams can be found.
I do not know why the weight of the water gremlins sold in Japan differs from that in the U.S., but hopefully the grams will be standardized.
@@haru834 thank you for you response. Did you test with heavier split shots. What the max i can go?
Se puede hacer con madera de pino o contrachapado?
Pregunta
Thank you for your message. Sorry for the delay in answering. I have never made a lure out of plywood and pine, but I have made one out of cypress.
I was able to make this Pencil Bait successfully by adding about 1 to 1.5 grams of weight in the tail, and about 0.3 grams in the front.
i have print out the template it seems pretty big from the video i want to ask if it has afjustment for the size
What is the length of the lure body template?. This lure template has a body length of about 72 mm (about 2.8 inches). If the sizes are different, try changing the settings on your printer.
i have measure it with a ruler it became about 9.5 cm
Hallo, Haru san,
Love your work, so detail, and seem very easy for beginner to try make it ones,
I'm sorry, i've print this pencil bait template , but the length, somehow become 10cm,
Haru san, could you make the template for minnow,, "Exodus Kraken 59s"?,
And please make video "how to make that lure, step by step,
Can't wait for your another work,
Thank you,
🙂
Hello anas, Thanks for your question. The reason why the pencil bait is printed large is probably due to the printer settings. Please use the ruler at the bottom of the template as a guide to set your printer and print.
I am making a prototype of a small sinking minnow, However, I think it will take some time to complete.
👍👍🎣🥰
Can you use basswood instead?
I've never used basswood, so I don't know the details, but I think it probably won't works. This bait was prototyped using the balsa wood, so if it were made of basswood, the lure action might be different.
ルアー作成に適した、卓上糸鋸ありましたら教えて頂きたいです。
もしよろしければ、ご使用のモデル、またルアー作成には何番のノコが適しているかなど教えて頂けましたら幸いです。
今使用している糸鋸機しか使った経験がないので、残念ながらルアー作りに最適なモデルは分からないです（ﾉ_・）。
ちなみに私が使用しているのは旭工機という会社のAF-eco1というモデルです。価格は約5万円と少々高価ですが、糸鋸機は頻繁に使用するので、高すぎず安すぎないモデルを選びました。
あと、糸鋸機を購入される時は、使用可能な替え刃についても調べて頂くと良いかと思われます。バルサ材のためのソフトウッド用、ヒノキ材などの少し硬い木材用、金属用など、それぞれの目的に合った刃を使用すると作業が行いやすいです。
@@haru834 ご返信本当にありがとうございます。動画から影響を受け、現在機材を揃えているところです。今日ちょうどヤフオクで落札したエアブラシの中古が届きました。
成形や塗装など、また何かありましたら質問させてください。
@@haru834 先日初めて動画を参考にペンシルベイトを作成してみました。一点お聞きしたいのですが、ラトルと重り用にボディをくり抜く際のポイントなどありますでしょうか？
と言いますのも、市販の皮ポンチを使用してやったのですが、すごく力が必要だったのと、力に対してバルサが負けてバルサがパキンと割れてしまったり、クラックしてしまいました。
動画ではあまり力を入れているようには見えないのですが、何かコツがあるのでしょうか？？
@@periodictable1035 質問ありがとうございます。バルサが割れてしまう場合は、以下の2点を試してみて下さい。
(1)切れ味が悪いポンチを使うと穴が空けにくくなりますので、ヤスリを使って研いでみて下さい。上手く研げるとコピー用紙やティッシュペーパーが切れるほど鋭くなります。
(2)皮ポンチの先端は円錐台ような形をしているので、バルサ材に対して真っ直ぐ押し込むと、割れてしまう場合があります。バルサが割れそうなときは、1度で深い穴を空けるのは諦めて、数回に分けて穴を空けてるようにしています。この時の穴の空け方は、ポンチを斜めに差し込んでみたり、ポンチを刃先を彫刻刀のように使ったり、ポンチの大きさを変えてみる等々……、状況に合わせた工夫をして目的の深さまで掘り進めています。
*もしポンチでの穴あけが難しい場合は、木工ドリルや彫刻刀を使うなど、別の道具を試してみるのもアイデアかと思います（・▽・ｄ）。
@@haru834 ご返答ありがとうございます。
皮ポンチに関しては、初めて使うので力具合や角度などアドバイス通り工夫してみようと思います。
ちなみに、ペン型の電動ヤスリなどお使いになったことはありますでしょうか？
今プロクソンのものを購入検討しているので、ご経験ありましたら教えて頂きたいです。
ルアーのテンプレートは何のソフトを使って制作していますか？
テンプレートは、Adobeのイラストレーターで作っています。おそらく別のソフトでも制作出来ると思うのですが、使い慣れてるのでイラストレーターで作っています。
Mr.haru 834
Anytime posting how to make squid jig please 😀🙏
Olá amigo muito show como faço para conseguir os moldes em PDF
Hello!. Thanks for the question. The PDF for the lure is available at this URL.
If you set your printer so that the ruler drawn on the bottom left of the template is the correct length, you can print it to the exact size.
*Mini Pencil Bait PDF: drive.google.com/file/d/1jICys2LxITjslZA6MNuUWJ6lsp0vwyxr/view?usp=sharing .
@@haru834 obrigado 👍😀
Super. How to get a drawing of this wobbler? thanks
Take for the template/drawing a look in the description
Hello Руслан Яремчук!, This lure template can be get from the video description or from this link.
*Balsa Wood Pencil bait: drive.google.com/file/d/1jICys2LxITjslZA6MNuUWJ6lsp0vwyxr/view?usp=sharing .
Hello, Eiko Fisser, Thank you for answering the question!.
@@haru834 Thank you very much. I myself am from Ukraine, so excuse my pronunciation a little wrong. Tell me, do you draw such drawings yourself, or take them from the Internet? I would like to have different wobblers in my collection. Is there such a site with drawings?
@@haru834 It is very pleasant to communicate with interesting people
👍👍👍👍👍👍⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
バルサ板はどこ買われるんですか？
質問ありがとうございます。バルサ板は主に近所のホームセンターで購入しています。
Smith Panish???????.?
Vc é o Kara show
💪👍👍👍💥
Please your to make pencil lure snake head 🙏 please
💪💪💪💪👍👍👍👍👍👍🙏🙏🙏🙏
Salve haru
您会中文吗？
Thank you for the question. I don't have any experience learning Chinese, so I can't speak Chinese.
耶，非常喜欢您的作品，非常棒👍🏻
She sits leaning to one side in the water
Good evening, Илия Топуров!. Because this lure has rattle ball, the lure body sit on the side slightly as the rattle ball moving. In most cases, attaching a hook will solve this problem, but if the lure still sit on the side after attaching the hook, the following are possible causes.
*One side of the lure body has been shaved off too much, and the left and right sides are not balanced evenly.
*The hole for the lure weight (or rattle ball) is too deep on one side.
*It's rare, but it is also possible that the hook and the lure are not balanced properly. Lure manufacturers have a lineup of hooks of various shapes and weights, so depending on the hooks you attaching, you may not be able to maintain the balance of the lure.
I think you can solve the problem of the lure sit on side by making the shape and buoyancy of the lure equal on each side when viewed from the front.
@@haru834 I mounted the hooks аnd the position are perfect. The hooks are 0.38g. Nomber 8. Тhanks for the reply.The bait is very good.
If you are in fish, you are free