Removing Car dent with Boiling water and a plunger! DIY
Vložit
- čas přidán 18. 04. 2020
- Showing how to remove a dent with boiling water and a plunger. Remember that not all dents are the same and some are not going to come out this way! Mine still had a little deep one at the end of the day. Doesn’t hurt to try though!
- Jak na to + styl
Hey guys if y’all have the chance to subscribe to my girls page that’ll be dope. She just started a vlog channel so tell all your girls to visit her channel and share. Appreciate y’all --> Priscilla Analiese 🔥💪🏽
❤️❤️❤️😘
That last name tho... 🤪
Hey what's up Jose? I know this is old and I'm late to the party, Lol .... But I came across your video because I have a dent to remove. Man don't pay any attention to the people in the comments trying to clown for likes. Just let it roll off your back and keep it moving 💯 At least you're Trying, Showing and Sharing content 👍🏾🙏🏾 The most 90% of them do is surf for videos that they can jump on the bandwagon with other people and criticize because they have nothing to do. Make more videos and keep going man. Subbed today.
Did this work ..??
"be careful not to burn yourself" says the guy in shorts, tank top and sliders 😂
Every way he can burn himself
Lol you know the water is just to get a good seal doesn’t matter if cold or hot lmfao
Uve got a point there lol 😂 i think they call it PPE 😬😷👍
Plus wouldn't you scold yourself as its a liquid not burn yourself
@@justinalexander4166 it also softens the metal and paint so it doesn’t crack or chip
Always wear slippers and shorts when boiling water in the area. Please remember.
He looked round to make sure no neighbors were seeing him look like a tweaker with a pot and plunger 😂😂
Yes this does work and is not only done on plastic. The hot water isn't to make a seal for the plunger it's to make the paint soft so it doesn't crack along the creases of the dent . It's easier to flat and polish clear coat than it is to repaint a whole door because the paint cracked and came off in one chunk.
Now we just buff out all these poop skid marks from the plunger and were done!!
I think he wanted to remove the poop marks from the plunger, but being too drunk he just included a car side to make his thoughts exceptional...just a Musk..
😂😂
Ba dum tss
😂😂😂
😬
Thank you much for this video. I have a small dent on the drivers side of my door (2017 Toyota Corolla) I pulled up at the gas station opened my door and hit the "U” shaped barrier next to the gas pump. I’m happy I viewed your video. Guy was asking me for 50.00 to repair this minor dent.
I’ll show my son your video, have him do it for me. Again, Thank you! 🙏🏽 Unlike some trolls here making fun of you. They have no respect. Me - I appreciate your video. 👍😎
Remember it can't be boiling too hot😂
What’s wrong with that? What’s the right way then.. 🤔
@@j.danielrobles7529 LMAO
@@trylessego exactly! So what if he said like that. Don’t be so boiling hot 🥵 😡 LMAO back at you!
@@j.danielrobles7529 well boiling water is 100 degrees centigrade? So is it actually boiling water you use or not??
@@j.danielrobles7529 you such a genius LMAO
Boiling water is one temperature, it can't be hotter unless pressurised or colder then it's not boiling. Unless at higher altitude pressures. Genius Man.
You can microwave water which can heat it past 100C without boiling
Proceeds to dent tf out of the door pushing the plunger hahahahaha
Should my water be a low boiling, medium boiling or high boiling? Thank you... 🤣
it could be all of them, but mostly just not too boiling, ok? hope that clears it up. 😆
Hahaha let’s just say slightly boiling hahahah
LMAOOO
Lm😂
I knew a guy who worked at a car dealership way back in the day, and said they used the old plunger trick then too. Said it worked like a charm.
the plunger just by itself or w the boiling water too?
It doesn't have to be boiling water, water from a hose will work just as well. The water is just to help the plunger seal better. Also a sink (red rubber one) plunger works better. I've done without any water at all before.
The hot water is to make the paint soft so it doesn't crack at the dent creases .
Plot twist : that's how they do it in the workshops and charge us hundreds of bucks 😶
Plot twist, no they don't.
@@StallionFernando yeah, they don’t do anything
Probably just use industrial plungers without boiling water cause i dont believe the water is needed
They actually just spend time thinking about what other problems they can make up and how high they can charge you without you complaining too much
@@BossKnighto
Today were gonna show you how to remove skin from your feet.
Lmfao 😂😂
😂🤣🤣🤣🤣you won the best comment of the day🏆
Someone doesn't understand what "boiling water" means
😂 but not too hot boiling..
He said, "you want it boiling... but not boiling boiling"
Making sure no neighbors are looking at him plunging his car. Especially that loud mouth teasing neighbor. 😂
*brings water to the slightest boil*
“This is boiling hot now”
That works on plastic not on sheet metal. Unless your driving Noddy’s car
czcams.com/users/shortsFajicGcDuls
@@IanJesting that wasn't metal, that was a plastic panel.
Sounds like metal to me
@@StallionFernando metal panel, try again.
Definitely metal.
It works really good with just warm soapy water too
Not too warm tho!
How'd u do that?
@@criticalpapaya pretty much the same as this method except you don't have to worry about dealing with boiling water and melting stuff
I can appreciate this yes...and may get around to trying it out...I've a dent in just about the same place very slight too
He turned 1 dent into a whole dent family
Great idea..lol
Only if you have a car with Tin Foil for a body.
This Won't work on an older/stronger steel body
Worked on my 1989 ltd crown vic, actual suction cup too. Popped right back
Hahaha Tun foil like the fool of oz hahahha
“With boiled water”
Once removed from the heat source, it stopped boiling.
Remember to wet the plunger to get a good hold on the panel
“Can’t be too hot or it will remove the clear coat “…….pours boiling water onto paint
No dent in my car .. i watched to see you👀😊😂
Worked great good job
Counter intuitive but if you were to knock that crown down in the middle between the two dents it would have maybe came out, that’s holding most of the tension in the metal
Ty,that was so helpful !
Great job man
Works more efficiently with a sink plunger rather than a toilet plunger.
Oh I will be using this!
Soon as I saw him wearing a pink sleeveless t-shirt I knew there was trouble.
Boiling water, bare feet in Flipa de Floppas and an idiot. Perfect fun viewing.
is that a gtr??
Bare feet and boiling water a great combination.
Just curious as to how much boiling I should apply to my pot of water?????
Omg everyone please do this to your car it works!!!!!
*immediately starts making dent worse*
Yeah, gotta use that slightly less hot boiling water. 🤣🤣🤣🤣
What's that Brown spot on your car door bro
Oh so this is why my neighbor was doing this the other day thought he was doing a dumb tik tok.
What do you mean by “ it can’t be boiling too hot”? It either is or it’s not
Make sure it's not boiling too hot. Mate water only boils at one temperature
rip
Cuuute!
What temp is "boiling too hot"?
Just a class note, water , once boiling, will not reach any higher temperature.
Only way to get water above boiling temp is in a pressurized atmosphere
So what do you do for the shit stains from the plunger?
Boiling but not too hot? What? Boiling is Boiling 212 degrees
At sea level, in open container. As you rise in elevation the boiling point goes down. If you cover and restrict the steam, the steam temperature goes up.
@@davidyetter5409 that's a meaningless distinction considering that he's pouring it out of an open pan.
@@paulheitkemper1559 Just referring to the basic laws of physics. Nothing more, nothing less.
Does it ruin the paint?
How hot should the water be?
Naaa man ,what you do is buy aircan for your keyboard ok, wait for hot day or pour the hot water on, the turn the can upside down and spray liquid nitrogen onto the heated body part you will see blue spark as your spraying the nitrogen out and it will pop out itself. I did this repair it works paint wasn't damaged.
The way he said toilet plunger
What a shitty way to do it. Hopefully your door is flushing fine now.
Made the debt ten times worse genius
Trying to pull one dent end of putting 5 more
Didn't even see a dent in the door, let me put a dent in it for you then try and use the method. Now that would be a video clip too watch and you would get more views and likes.
I was trying to find it too
Remember kids, the water can't be boiling too hot! 🤷🏻♂️🤦🏻♂️
You are crazy bro 😂
That’ll leave swells in the paint
Go inside and remove the door panel and roll the dent out.
You can skip the boiling water and use a hair dryer if you want... Unless you just like waiting for water to boil
Wait did it work?
Y se destapó?
Can anyone tell me where is the dent??
Did it work?
Boiling too hot? Are you at sea level or just spaced out!
Any water work it’s just to make a seal
No . Hot water stops the paint from cracking at the creases of the dent .
Boiling water is always 100°C, otherwise is just hot
That shit doesn't work!
Cant do this on a classic car
Next video in the series was on personal protection equipment
Now that there is one "shitty"repair.... haha
The water don't have to be hot killer You just need suction
I don’t see any dent on the car at all,
I mean there is no dent in first place on that car when he pour that hot water. This guy is trying to make a fool of everyone here just to see his video
U had the wrong plunger, the purpose of that design is to push the stuff down waste tp ect, the other pulls up n sucks with out the center ring
What dent?
Why he so fine tho
And packing
Just flush the whole car down the toilet 💀
Um it's easier to remove the interior door panel and work the dent out with proper tools smh
Plus boiling water, or almost boiling water, doesn't heat metal enough to make it plyable like it does when poured over plastic. What this kid did was he saw a video and stole it in order to get clicks or as the "cool kids" would say, get me some "clout". I agree. Take the inside panel off and work with real tools. I think it's maybe 4-6 screws to remove the panel. I think he actually dented it more and he even paused but caught himself doing more damage
Eso podría funcionar en mi Tesla, si tuviera un Tesla.
Did you just like yourself? Lol
How to kill grass with boiling water
I’m going to try this. Someone punched my car and dented it.
If you scratch and sniff the plumger spot does it smell of shit?
Am I the only one who waited for the whole door to come off?
As ridiculous as this video is your title got me to watch it because I couldn't believe someone would try this and think it actually works
Explain how that boiling water won't destroy your paint??
The boiling water makes the paint soft so it doesn't crack at the creases of the dent. It's easier to repair dulled clear coat than to have the whole door resprayed because the paint cracked down to the metal.
It can't be boiling too hot? I'm not sure what you mean. Water boils at 212°F(100°C) at sea level. Once it starts boiling, no matter how much heat/energy you put into it, the temperature of the water will not go over 212°F(100°C). The steam, however, is another story entirely
Don't try this on Tesla, the water will go through misaligned panels and right into the car.
there was no dents 🤣
I like my boiling water not too boiling.
I thought the door was gonna come off with the plunger 🪠
Sometimes on some dints , some people.... 🤪🤪🤪
By boiling water you mean hot water because it stopped boiling the instant you removed it from the heat.
i dont see its working😢
If it's boiling water it is very hot - simple phisic.
Is that Maruti Suzuki car. Tin ka dabba
The water is no longer boiling once you take it off the heat source .