How to Replace Universal Dust Shroud Dewalt Hand Grinder for Concrete Grinding Mryoucandoityourself
Vložit
- čas přidán 11. 09. 2024
- Here is how to replace universal dust shroud Dewalt hand grinder for concrete grinding. Previous MrYoucandoityourself video: • Installing Hardwood on... .
THINGS I MENTION IN THIS VID:
- Dewalt Grinder 7 inch - amzn.to/2hTuCl7
- Dust Shroud 7 inch - amzn.to/2hOwdeL
- 7 Inch Turbo Diamond Cup Wheel - amzn.to/2hBYTqI
Floor leveling:
- Concrete Mixer for barrel - amzn.to/2h3CnWV
- Concrete Mixer for bucket - amzn.to/2h55Dyf
- Dewalt Drill for Mixer - amzn.to/2i8ku75
- Straight Edge 6 Ft. - amzn.to/2h3z9D1
- Straight Edge 8 Ft. - amzn.to/2h3z5Dh
- Straight Edge 10 Ft. - amzn.to/2hNKhFj
- Spike Roller - amzn.to/2hTv8iP
- Gunite Shoes - amzn.to/2hC2btZ
- Self-Leveling Kit - amzn.to/2hBMy5M
- Gauge Rake with Sleds - amzn.to/2i9gfbu
- 15 Gal Mixing Barrel - amzn.to/2i3jHsp
- Dewalt Laser Level - amzn.to/2i8rO2A
- Concrete Finishing Trowel - amzn.to/2i3DMP9
- Mapei T Primer
- Mapei L Primer
- Mapei Novoplan 2 Plus 50 lbs. Professional Self-Leveling Underlayment
SUBSCRIBE FOR MORE VIDS! www.youtube.com...
ALSO FIND ME HERE:
/ mryoucandoityourself
/ ovisha
Thanks for watching! Please give this video a thumbs up, leave a comment and add to your favorites! Please share this video with your friends, family, and animals it really helps me out! =]
All MrYoucandoityourself videos are here: www.youtube.co...
Click this link for my other Hardwood Flooring Tutorials!
• Hardwood Floor Install...
Click this link for my other Laminate Flooring Tutorials!
• How to Install Laminat...
Click this link for my other Laminate Stairs Tutorials!
• How to Install Laminat...
Click this link for my other Hardwood Stairs Tutorials!
• How to Install Hardwoo...
Click this link for my other subfloor leveling tutorials
• Concrete, Wood and Ply...
Click this link to watch tutorials on Winder Stairs Installation
• Winder Stairs: Hardwoo...
Tricks for Leveling a Concrete Subfloor
• Tricks for Leveling a ...
Wood Floor Installation tricks
• Wood Floor Installatio...
Also visit hardwoodfloorin...
I watched hoping for a tip on getting the diamond wheel off and I'm pretty sure you just solved my problem! Feeling a little stupid but with the shroud on there I didn't notice there was a place to put a wrench!
Thanks
Hi Jeff, it's little tricky, remove front panel from shroud and you will get access. Thanks for watching and commenting!
Awesome video. Very detailed. Thank you
You are welcome!
I got one today . I don't know how I was working with out one before:( .
Thank you
Yes, It was you mistake!
Thank You, very good and thanks for the links too ! !
You are welcome!
How do u take the blade off. Am having trou me getting mine off
Sometimes can't use the key for removing blade and I used chisel and hammer. Just lock the button to stop the blade, put the chisel to the hole in the blade and hit it with hammer. It's take time, but work well. Thanks!
Thank you for the video. Love the soundtrack by the way. Does it need to be shroud need to be completely flush with the cup or the cup need to be a little bit higher say 1/8 higher?
Hi, cup should be flat or little bit lover then shroud. Thanks!
trying to do this right now with a DW840, but there is not enough length on the bolt to add a spacer and still get the nut on the end!
I am buying wheels with thread and no problem with the installation.
@@MrYoucandoityourself I don't think that wheels with thread can help those of us with short bolts. Still need to add locking nut. I just got a shroud that extends too far.
I have a DW840 and I forget which way to turn it to take it off. I've been hammering away but I can't figure out which way I had screwed mine on in the beginning.
Off to the left.
nice video tks
Thanks for watching!
can you make the blade higher, by adjusting the screws on the springs, without adding spacer ? This is very helpful, because, my blade was too low, and I was, having, to, push down, too hard. Now, I know what to do. But because, I am using, my grinder, as a sander, I don't know that, I can use spacer. So, do you think, you could make blade closer to top of brush, by , just adjusting the
spring screws, w/o , spacer ? Thank You, for good information. Much appreciated. I ordered a dust shroud off ebay, for $18,
It looks like the dust buddie. I will see how it compares.
You can't adjust with that screws - only washers. Cheep dust shroud only for one job.
What model Dewalt are you using? I tried this Dust shroud with Chicago Electric 7" grinder, spindle thread not close to being long enough to work with diamond cup blade.
DWE45199" 6,500 RPM 4HP ANGLE GRINDER
Well, I just had the same problem. I trimmed the bristles to 1/2 their length...
and it's working well
where can you buy those metal spacers separately? i really need them and can't find them anywhere.
Слава привет, тебя интересуют шайбы разной толщины?
MrYoucandoityourself Привет! Да шайбы
Эти шайбы идут в комплекте with dust shroud.
MrYoucandoityourself А хорошо. Спасибо за ваш ответ. Благословение вам!
Thanks for the feedback. What size tool did you use to remove diamond wheel?
17
what model is that dewalt sander?
Hi, you can find link in description. Thanks
thinking about picking up one of those dust buddies, thanks for taking the time to show how it works.
Y
I
i need one of these,where can i get one
+Eric Floors You can get it on Amazon, in Home Depot.
MrYoucandoityourself thanks sp much.i sand floors so this will cut down on the mess when i need to use my grinder:)
👍👍🙏
Thanks for watching!
Spelled Highest
Hi my friend
What size of grinder do you use
Many thanks 👍
7" with turbo blade.
MrYoucandoityourself Hi my friend
Thank you 👍