Is this the best upgrade for a single stage dust collector?
Vložit
- čas přidán 21. 10. 2023
- Check out performance updates here: • How is the upgraded du...
The Wen 3403 Dust Collector is a great entry level dust collector. I did not enjoy emptying the bags of dust, so it was time for an upgrade. After 2 months of research, I built an upgraded dust collector using the bones of the Wen and a bunch of others. See how I fit the Oneida Dust Deputy and Wynn Environmental Filter into a two-stage system. This could also work great for the Harbor Freight Dust Collector.
🐦 Social:
Website➔ outdoorsengineer.com
Facebook➔ / outdoorsengineer
TikTok➔ / outdoorsengineer.yt
Instagram➔ / @outdoorsengineer
🔗Episode Products:
Wen Dust 3403 Dust Collector➔ amzn.to/3mJjqKM
Oneida Super Dust Deputy (0.5-3 HP)➔ amzn.to/3Sa6FJI
Oneida Super Dust Deputy XL (3-5 HP)➔ amzn.to/3MaRQTq
Oneida 6" Flange➔ www.oneida-air.com/ductwork/m...
Flexible to Sch 40 adapter➔ www.rockler.com/rockler-sched...
Wynn Environmental Filter➔ wynnenv.com/products-page/woo...
Gamma Seal 5 gallon Pail Lid➔ amzn.to/491ExhW
Milwaukee Jig Saw➔ amzn.to/3S77Vxa
Milwaukee Drill➔ amzn.to/48VwtiC
GRK Screws➔ amzn.to/45GPjXV
Upgraded Harbor Freight Impeller➔ wenproducts.com/products/3403...
As an Amazon affiliate I earn from qualifying purchases at no cost to you.
🎥Recording
Canon EOS R10: amzn.to/3tvoGYO
Canon RF16mm F2.8 STM Lens: amzn.to/46OOeyf
RF16 Lens Hood: amzn.to/3FiBEM3
RF18-150 Lens Hood: amzn.to/46tc6aN
K&F Tripod: amzn.to/3ZUd2m6
Go Pro Hero 8: amzn.to/3pEGsnV
Rode Wireless GO II Single Channel Wireless Microphone System: amzn.to/3GvRoN5
Rode SmartLav+ Lavalier Microphone: amzn.to/3GvSyby
Rode VideoMicro Compact On-Camera Microphone: amzn.to/31ZNquR
Go Pro Media Mod: amzn.to/3mgjHED
Tri Pod Adapter: amzn.to/3mbgAxO
Extension Arm: amzn.to/3IZVT1O
Joby GorillaPod: amzn.to/3e51sOc
Wood Working
Countersink Bit: amzn.to/3GRROe3
Wen Dust 3403 Dust Collector: amzn.to/3mJjqKM
Fast Cap Tape Measure: amzn.to/3mJjqKM
2 1/2" Dust Collector Hose: amzn.to/3IZTWT2
4" Dust Collector Hose: amzn.to/3yBD9AN
2 1/2" Dust Collector Accessories: amzn.to/3yABFH7
Push Blocks: amzn.to/3e2IwQ1
Wood Peckers Square Clamps: amzn.to/3zbDjPC
Gamma Seal Bucket Lid: amzn.to/3jBt7fz
Sanding Mouse: amzn.to/3VvWk97
Power Switch: amzn.to/3vqneVg
Kreg PRS5000 Precision Router Lift: amzn.to/3vs5wk7
Microjig Grr-Ripper GR-100 3D Table Saw Pushblock: amzn.to/3IiBc31
As an Amazon affiliate I earn from qualifying purchases at no cost to you. - Jak na to + styl
See how the upgrade is going here: czcams.com/video/AEMrpWTRFwE/video.html. We talk about more updates, filter performance, dust deputy performance, and more!
great video and content!
This is a REALLY good video. Keep it up... your channel is still underrated but not for long, I bet. 🎉
Wow, thank you!
I liked your idea. I want to make one like it and I hope it looks the same as yours. blessings
Awesome. Send me an email if you have any questions.
Easy upgrade for barrel would be to get a clamp with quick release. Love the video and about to get a wen dust collector with the plan to do same upgrade next year.
The removable tops are great. Just get a two piece lid and it works great!
Or you could put a couple handles on the barrel and spin the barrel @@OutdoorsEngineer
I believe that's a 3 stage system. Cyclone/separator/filter. Looks like it does the job!
Sure does!
You could probably delete the Oneida the way you have it set up and just put the big barrel where you have the small bucket. That's my plan except I'm going to vent my outside through a dryer vent that's in my workshop and also delete the filter.
The Oneida is nice to be able to get most of the big stuff out before it gets to the fan. The idea is to have multiple ways to extract dust, and the deputy is the first one in the line. Thanks for watching!
has merv 10 been enough or do you see some super fine dust escape over time?
I honestly haven't noticed dust escaping. I've been happy with it. I never really thought of getting the next step of I think MERV 15. Are you thinking of getting one?
I have that idea for the future, mi sisten is same but whith vacuum and dust stopper, but mi sistem is 2.5 inch, is that a problem? Any answer in spanish is better but i have translayor
Traduje esto usando IA. Típicamente, la mayoría de los sistemas son al menos de 4 pulgadas. Si tienes un sistema de 2.5 pulgadas, eso restringirá el flujo.
I translated this using AI. Typically, most systems are at least 4 inch. If you have a 2.5 inch system, that will restrict flow.
@@OutdoorsEngineer tankyou
What do you do to clean the filter?
Stick around. I"m working on a video this week to be release this weekend of the updates and cleaning of the dust collector!
Just use the air compressor to blow it out, blowing air from the outside.
is the filter really needed, what exactly is it doing?
Filtering the air and not blowing dust directly into my shop.
My super d.d. is way bigger that that. I don't think they had that size at the time I did mine. Or I messed up.
I originally had the big one. Then realized that they had a smaller one, so I swapped them and Woodcraft made that very easy. Sometimes the bigger one won't work as efficiently with a smaller blower motor that's on the Harbor Freight and Wen 3403.
Remove the guard on the blower inlet you will increase the sucking on the system.
Good idea!
Why buy a different 2 part lid? Just cut the one you have to hold down a piece of ply to the barrel.
Not a bad idea. I do have another single lid I could cut down too. To be honest, I don't know if it's s need or not. Not that bad to just remove the flange.