So very glad you do what you do. Always feel a little lost and intimidated when working on these, and seeing you guys figure it out first makes life much much easier. Thank you from across the pond !
Bought leather seats for my disco 3 , but my old seats were just basic non electric , thought new ones would just plug in lol , thought I would have to resell them , but found these guys on you tube , followed there detailed guide and I have power seats now so thanks guys bless you
Brilliant video. I needed to replace the power seat control module on my LR3 and found your video super helpful in loosening the seat so I could get to the connectors.
Great video again guys, if you disconnect the battery on a Discovery 3 do you lose all the settings in the memory ? Because when I had a new battery fitted at the garage they had to plug a machine into the port were you plugged in the GAP IID TOOL before they changed the battery’s over. Can you advise me please the best way to do this. Thank you again for all of your help. Regards Chris
Dear Simon, I’ve got a 2008 range rover sport and the drivers seat has gone funky. It was put all the way forward, but when I attempt to move it backwards, the outer portion moves, but the inner does not, so it goes crooked and the motor sounds odd? Every other function operates properly. Seat up and down. Recline back and forth. Any advice before I remove the seat and tear into anything would be GREATLY appreciated. 🙏
@@L663 THANK YOU for the response! I’ve unbolted the seat and tipped it back, and can see the little motor in question, and both little cables that are protruding from either end of the motor are spinning, however only one rail moves? Is there a little gear or something those little cables are inserted into? Looks like a huge seat teardown to explore much further?
@@L663 My apologies. I know it’s late there, but I wanted to let anyone watching with this same problem know that I finally found the culprit. I removed the seat and took off the rails and the gear inside one rail is shot. The other you can spin the cable with a drill and it moves great, but this one just spins and won’t move at all. Looking for a rail now, I suppose. 😔👍
@@tmcorey1 Here is the picture from the parts diagram - hope this help s let me know if you need more info www.dropbox.com/s/buxmo9p4cudlm1t/discovery%203%20seat%20parts.JPG?dl=0
Hi Guys, Videos are great. Need some help and google has not found my answer. I have a 2009 Range Rover Sport. Drivers seat has a clicking noise. I think I need to remove the seat switch. Is there a way to remove this switch without removing the seat?
You can always tell a family discovery, they are minging. Ask me how I know. We have a D4, with an airbag error “B0022 left curtain deployment control 2”. Any ideas? Is this likely to be a loose connection under the seat? Thanks
Hi, I have an 2006 LR3 HSE (USA) and found a set of 2009 LR3 Seats online, will these be plug and play? I saw that the seat belt pretensioner was different and needs to be swapped. Is that all that has to be done? My 06 seats are ripped. Just want to make sure all functions like power and heated seats will work with no issue and also if Airbag light will come on. Thank you!
I think you will be OK - there will be some fiddling about needed but Land Rover did not change that much.... why would they as it cost them money to make changes to the wiring etc.
Very dirty floor in your car, you do not clean it very niryashlevo breathe dust in your car is disgusting probably be my discovery is very clean and hide
So very glad you do what you do. Always feel a little lost and intimidated when working on these, and seeing you guys figure it out first makes life much much easier. Thank you from across the pond !
Our pleasure!
Bought leather seats for my disco 3 , but my old seats were just basic non electric , thought new ones would just plug in lol , thought I would have to resell them , but found these guys on you tube , followed there detailed guide and I have power seats now so thanks guys bless you
Muchas gracias por tus vídeos. Eres mi héroe. Gracias a ti he desmontado muchas partes de mi vehículo
Brilliant video. I needed to replace the power seat control module on my LR3 and found your video super helpful in loosening the seat so I could get to the connectors.
Glad it helped
I love watching your videos guys, keep up the good work
Extremely Helpful video. Very much appreciated!!!
You're welcome!
Brilliant video lads thank you
Brilliant Video. Loving the commentary. I want to change my manual seats and upgrade to leather electric in my D3. Is this possible?
Thank you for doing disco 3 videos again!!!
We have loads of Disco 3 customers so more than happy to get the Discovery 3 out again.
Excellent videos, have been very helpful. Do you know if Disco 4 front seats will fit into a Disco 3?
Thanks for sharing. I look forward to the rear seat removal instructions as well.
Should be done in the next couple of days.
Hi I have a Range Rover sport supercharged 2005 is changing the seats the same procedure as the disco 3 ?
Cheers Dean.
Not done it but must be very similar
Really helpful, thank you: deep valet coming up!
Will it be possible to install the two front seats in a Discovery series 2, just ask.
I love your videos, you should be on the telly. Brilliant.
I think my videos may be of limited interest !.. although i do rather fancy myself as the next Dick Strawbridge !
I should also add that working with young Ian is good - its maybe him that should be on telly !
Great video again guys,
if you disconnect the battery on a Discovery 3 do you lose all the settings in the memory ?
Because when I had a new battery fitted at the garage they had to plug a machine into the port were you plugged in the GAP IID TOOL before they changed the battery’s over.
Can you advise me please the best way to do this.
Thank you again for all of your help.
Regards
Chris
This English guy is hilarious .. “right - right”
Hi great video can you tell me where the heated seat wiring for drivers seat is on L320 kind regards
You guys are great !!!
Did you ever sort the heating side of things Simon have bought a set of seats to put into my dads se.
Mine is an Disco 3 SE 4.0 without the 3rd row. I got from other one and installed it. The floor has holes but not nuts
Thanks for the update - when i do the rear seat video i will note this - thanks
would this be the same for 2007 Range Rover sport, please?
Yes its same car. Different body😊
Hi ✋🏻 my seat belt if unplugged it don’t go back ? Can I clean it or change it ?
What size are those tires and Rims?? Your Rover is awesome!!!
Good video guys 👌🏾
Dear Simon, I’ve got a 2008 range rover sport and the drivers seat has gone funky. It was put all the way forward, but when I attempt to move it backwards, the outer portion moves, but the inner does not, so it goes crooked and the motor sounds odd? Every other function operates properly. Seat up and down. Recline back and forth. Any advice before I remove the seat and tear into anything would be GREATLY appreciated. 🙏
Does your car have a sunroof ?
HAve you seen this video ?
czcams.com/video/JTPNOovJPXs/video.html
@@L663 THANK YOU for the response! I’ve unbolted the seat and tipped it back, and can see the little motor in question, and both little cables that are protruding from either end of the motor are spinning, however only one rail moves? Is there a little gear or something those little cables are inserted into? Looks like a huge seat teardown to explore much further?
@@L663 My apologies. I know it’s late there, but I wanted to let anyone watching with this same problem know that I finally found the culprit. I removed the seat and took off the rails and the gear inside one rail is shot. The other you can spin the cable with a drill and it moves great, but this one just spins and won’t move at all. Looking for a rail now, I suppose. 😔👍
@@tmcorey1 Here is the picture from the parts diagram - hope this help s let me know if you need more info
www.dropbox.com/s/buxmo9p4cudlm1t/discovery%203%20seat%20parts.JPG?dl=0
Hi Guys, Videos are great. Need some help and google has not found my answer. I have a 2009 Range Rover Sport. Drivers seat has a clicking noise. I think I need to remove the seat switch. Is there a way to remove this switch without removing the seat?
Sorry not come across this one - the seat is not so tricky to remove.
Does the noise occur when you move forward / back ?
You can always tell a family discovery, they are minging. Ask me how I know. We have a D4, with an airbag error “B0022 left curtain deployment control 2”. Any ideas? Is this likely to be a loose connection under the seat? Thanks
Hi, I have an 2006 LR3 HSE (USA) and found a set of 2009 LR3 Seats online, will these be plug and play? I saw that the seat belt pretensioner was different and needs to be swapped. Is that all that has to be done? My 06 seats are ripped. Just want to make sure all functions like power and heated seats will work with no issue and also if Airbag light will come on. Thank you!
I think you will be OK - there will be some fiddling about needed but Land Rover did not change that much.... why would they as it cost them money to make changes to the wiring etc.
@@L663 ok awesome. Just want to make sure the wiring will be ok.
Does disconnecting battery lose radio codes etc ?
I think the codes remain but it may depend how long you leave it !
take an entire LR4 apartment to the bolts ever part and record it please.
Very dirty floor in your car, you do not clean it very niryashlevo breathe dust in your car is disgusting probably be my discovery is very clean and hide