WERA Kraftform Plus Screwdriver Sets (Insulated & Non-Insulated)
Vložit
- čas přidán 4. 06. 2015
- Get the WERA Kraftform Plus Screwdrivers Sets at Amazon here --- www.amazon.com/s/ref=nb_sb_nos...
Check out the full written review at www.realtoolreviews.com - Auta a dopravní prostředky
Okay I'm sold. When you moved that tool box my jaw almost hit the floor.
I was about to write this
Been using both sets of these for quite a while, and absolutely love them. The ergonomics/general feel of them is extremely comfortable, better than any other I've tried. I also use Wera's "chiseldriver" set for more heavy-duty applications, and they are simply amazing, from simple screwdriving tasks to beating them to death with a hammer and they stand up and do it again. Fantastic tools, worth every penny!
Thank you for this.
Have seen MANY reviews about these but moving your tool box sold me.
I LOVE these screwdrivers and my knipex pliers
I know that these are my tools and my co workers joke that they are “funny” looking if you know what I mean, but they always ask to use my drivers 😂
The tips on these really are impressive. I was surprised when I first got mine , as I pulled away after screwing my fist Phillips the screwdriver stayed in the screw and came right out of my hand. Granted I was not gripping it tightly but I’ve never had that happen with any screwdriver. I have the insulated set and want to get the non-insulated now. And they are as comfortable as everyone says.
You have the best tool channel on CZcams .
That pull with the Wera was amazing! Good job!
That tool box pull you did really impressed me
Going to order some of the insulated ones. Thanks for a nice review and good look at these fine screwdrivers.
Added some of these after seeing your channel a while back. I buy the 900 series. Love the steel impact cap and the wrench flats under the handle. The price is very low considering. Great screwdrivers.
I have the micro precision drivers and the chisel drivers. They are by far the best screwdrivers I have ever used! Looking forward to getting the laser tips too.
I have the 6 peice set and love it! Great review as always.
very comprehensive review. great vid! I am sold. thank you for the information
These screwdrivers are the best I have ever used! I have two sets of the green and black version, that laser etching really does work and never strip out the fasteners.
Francisco Carrion Nice! I use them everyday.....they are great!
Just bought a set of the vde's. Superb quality. Gonna get a normal set and a micro set now.
Welp, I'm definitely sold on these now. That toolbox test was amazing.
TheFlamingChalupa Nice :) You wont go wrong with Wera!
This is a great review! keep up the great work, just bought myself a set of kraftforms insulated.
Joseph Dobrowolski Awesome! I hope you like them!
Sir, great sets of tools.
Always insightful I wound like to see Wera's ratcheting screwdriver.Also do you have any hands on experience with there Metal ratchets?
Hey man can you PLEASEEEEEE do a comparison of Milwaukee Shockwave, Makita Gold, and Dewalt Impact bits vs the big boys like Felo impact bits, Wera Impaktor bits, Festool bits and Wiha Terminator bits? I think it would be a great video to show people that the cheap bits might actually cost more than the German ones because they need to be replaced more. Or it could go the other way! I really think it would be great. KCToolCo I'm sure would love to get in on this. Because you do real tests that are actually in depth and complete. Your reviews are the best and most comprehensive by far.
Adam Reichl there are some bit reviews by Patriot 36 channel. The makita gold dominated the big box brands. Dewalt, Milwaukee, Bosch etc.
Check out project farm’s channel
I personally have wera screwdrivers and multi screwdriver set.
The antislip laser etching tip faded with in a yr.
However, well worth the price. If you only use number 2phillips and 2 slotted screwdriver as most Americans your talking 10$ year. That's not bad. But my screwdrivers still work and I magnetized the tips.
Would that laser pattern damage screws that you would have to remove and install?
I have a set of the Craftsman Diamond tipped screwdrivers that MAY be a more comparable tip to these.
I looked at the link provided and the prices are decent 👌so I will definitely get a set of these and the 1/4 inch driver. 👍👍
Thanks for the review and if you get your hands on a Craftsman Diamond tip, see if they do the same with the box.
I'm a Wiha guy, but I think I'm going to pick up one or two Wera's to try out. You should also do a review on a Wiha SoftFinish and/or MicroFinish. Those are really nice screwdrivers! Thanks for the great review :)
WERA are made in the czech rep. , but you wont see that on the box.........HQ in Germany & thats it.........go with Wiha or Felo (stamped with" germany").............:]
Same here , i use mainly Wiha but recently purchased a wera hex short set , nice ......just wish they were german made/stamped :]
Thanks for the review. I have heard good things about WERA. I like the laser etched tips.
Russ Webster Thanks! The laser tips are one of those things that are really impressive right off the bat.....and had me hooked the first time I tried them out. Prior to that I thought the Wera screwdrivers just had a unique shape & wall mount, but those etched tips are the best part in my opinion.
I have the vde set too for electrical. I also got the stainless steel set, they have a special hardening process to give stainless the same hardness as carbon steel
BrenticusMaximus1 Nice.....I will have to look into them :)
It will be awesome if you try that tool box test with the new Craftsman Grip Series Screwdriver set. Has that same etched tips.
Gold63Beast I will have to look at them the next time I am at Sears....thanks!
Get some of the chiseldrivers to review! they are absolutely the best screwdriver wera makes. i've beat on the same set for years now at work. also have ratcheting RA27 and electrical set with removable blades.
would make for a great review to do some torture testing on their chiseldrivers.
Ian Mears Good idea! Let me see what I can do! :)
Great review and demonstration.
Mike L. Thanks Mike!
Wow that strong and cool out it grips the head. Cool video
Eric DuPlantier Thanks Eric!
I own 1/4 and 3/8 Wera Zyklop ratchets. They are pretty cool. Very versatile.
Jacob Hunt Nice.....I have the 3/8" metal Zyklop & the 1/2" swivel Zyklop.....I think Wera makes some great tools all across the board!
Great review. The toolbox pull was pretty impressive! I wonder how these compare to Snap-On...
Fenriz Wulf Thanks! I am not sure, I dont have any of their newer ones. As far as I know, Wera has a patent on the laser engraved tips, so not many others can duplicate those types of results.
I've got several different Wera screwdrivers. I love the laser tips. One thing though - I've also got a set of Vessel screwdrivers for when I work on electronics and/or Asian vehicles - they're full of "JIS" type screws...basically the Japanese version of Phillips screws. These Vessel screwdrivers will also pull my toolbox around like you did in this video. Any chance you could do a review on JIS-type screwdrivers?
AKJeeper are these those pain in the ass zinc colored Phillips on Honda’s and Toyota’s? I have a hard time getting those out. If I’m using the wrong tool I’d love to have the correct tool to not strip those damn things out.
Yes, Phillips is the wrong tool. There is nothing wrong with the screws. Vessel or gofast innovations make or sell JIS screwdrivers. They work fine on Phillips, just not the other way around. It is not a good idea to call them “Japanese phillips.” It is confusing. Just say JIS.
Are the shafts on the insulated ones much thicker than the shafts of the non insulated?
I'll be working on aircraft electrical systems, so part of me thinks I should get the insulated ones, but then if they're too thick to get in to tight places they may not always work for me. Pulling circuit breakers and disconnecting power is standard practice in aviation so I don't think the chances of being shocked are too high, but if the shafts are a similar thickness then maybe I should get the insulated just to be on the safe side.
Thanks for the review!
the "insulated" screwdrivers are rated for "1000v" even tho most will far exceed that voltage range to around 22kv. as a electrician I do not use insulated screw drivers much. one is to never hold the shaft of a screwdriver, you can use electrical tape (old trick) or even plastidip to create a insulation mod. really the point of insulated screwdrivers is to prevent an electrical arc from occurring if you do happen to short circuit something such as if you drop a tool in a panel ect.
great video. keep up the good job. :)
i got both sets, and they have held up well the past 5 years
salland12 Nice! I didnt even realize that they had been out that long already!
In Europe they have been out for years now.
Bought these 2 sets 4/5 years ago. holding up very well even after me abusing them and on some occasions using them as chisels.
Even the lasercut tips are all intact.
They weren't cheap though but after time well worth the investment.
Real Tool Reviews Wera is in bussines 80+ years already :) and kraftform is out about 20 years I think :) nice video!
I have the insulated set in stainless. Love them
Michael Fender Nice!
Another great job
George S Thanks George!
Check out PB Swiss flat blade technology, they flatten the tip to control cam out on standard screws, pretty cool.
BrenticusMaximus1 I will check them out...thanks!
All of my screwdrivers are weras now. I love them, especially the slim shank insulated Pozidriv/flat combination #2 driver.
+FoodOnCrack Nice.....yeah I really like WERA.....I have them in the woodshop & garage.
Personally i prefer WIHA (& felo "frico") screwdrivers ( Germany) WERA although great are made in the czech republic........................
The "non-insulated" screwdriver's handles are actually just as insulated as the insulated. They make the ones with insulated blades because try as you will, your fingers WILL wander onto that blade. Source? I'm an industrial electrician that has gotten hammered more than once because I thought I could just be careful and work on stuff hot, lol.
well I'm sold, buying them now
Could you do craftsmans newest sockets and wrenches that came out i want to see how they perform
Kenny Stoliker What are the model numbers? I will see what I can do....thanks for the suggestion!
I love my craftsman professional screw drivers . Definitely loving those laser etched tips tho. I see a dewalt drill. Hopefully a review coming soon? Lol
Jordan Booth Yep.....almost done with the testing/runtime footage :)
I find Wiha and PB Swiss screwdrivers more comfortable than Wera. The Lasertip weared down from my flathead Wera within a few weeks.
Can you do a review of Channel lock made in the U.S.A. screw drivers?
They are fine I suppose, but if you can lay your hands on Wera or Wiha Screwdrivers in the same price range - take them.
Yeah, yeah blabla. No, seriously, take them.
I'm German and if I've the choice between a new 2020 VW Golf and a ~'65 until ~'80 American Muscle Car, do you really think I would chose the German Car? Not over my dead body.
But seriously, some Tools from Germany are simple, I wouldn't say "better" but simple smoother overall.
Don't let guide you by only "Oh, USA! USA! USA!" because you will settle down for lower standards.
For an example, try out Stahlwille or Hazet Ratchets. I'm pretty sure you will be amazed by them. Well, at least if you can life without fast lock on the Hazet but those a warranted up to 1000 Nm (over 700 Pound force per Foot) so ...
I'm buying some of these, nice. Thanks...
Jammin Dave Good choice! :)
Nice video, I can not believe that the ends is precise made you still miss the video of
Wera 932/6 Kraftform plus screwdriver set and I like the price and that continues kepe make as good video men
MP 10000 $ 932/6 is coming up soon.....stay tuned! :)
Look like some great screwdrivers! Little to pricey for my taste, but maybe i'll see a sale somewhere. For the time being my Milwaukee set will have to carry me. Thank you for uploading!
Don't know if you're in the uk but there are some on offer at the moment at screwfix but there aren't any in stock anywhere near me
+TheLukey21 Unfortunately no, i'm bound to the land of "freedom". As if. Any chance you'll take in a kindered soul, his wife, 3 horses, 2 dogs, and 23 cats?
the shaft and blades feel light to me . almost like aluminum . I read wera doesn't deal with warranty direct to the customer. they want you to warranty through who you bought them. I suppose they are cheap enough to just toss out if breaks
The best VDE screwdrivers in the market without a question. Not to mention they are cheaper than other makes like CK, Klein Tools etc. Try and change my mind..
So at around 1:30 you're saying the exposed shaft doesn't provide any protection... Dually noted. Man your videos are a lot more informative than I thought.
Seriously though I am switching all my hand tools over to Knipex, Wera, Wiha, Gedore, and other German brands. After using their bits and a few tools and watching your reviews I have fallen in love. Also been switching to mostly German power tools as well.
I'm going to order some of the non insulated ones
James'sWorld You are going to like them a lot.....I use mine daily.
Much better than my review...
Arson Ha.....well I dont know about that.....it is nice to hear different opinion/outlooks on tools.....I like your reviews a lot. :)
4:05 got my attention
This video at 4:05 - 4:55 should = $100 000 a year at least marketing job at Wera. But still awesome video. liked and subbed 👍
Haha nice....thanks!
good
good demonstration I hope wera paid you for that you deserve it.
+nolimit7 Thanks! And nope, I dont charge.....I do however like showing everyone quality tools & how they actually perform! I am glad you liked it!
+Real Tool Reviews when you pulled your toolbox with it thats what made me wanna pull out my wallet. Ill be going to costco tomorrow as i see them in there the other day for about £18
Dude don't even play like that. You know your wife is squatting behind that tool box pushing it around.
Good vídeo Germany tools the best quality, thanks.
Wera screwdrivers are good, well-made, but I cannot buy them in my location (Vietnam). There're completely no Wera dealers or authorized distributors. Poor me!!!!
N.H.L Minh Hiền can you not buy them online?
The insulated set goes for 24$ right now
Лайк))
Александр М. Брест Баярлалаа! Намайг ч бас !
Real Tool Reviews ???
These Weras are not "phillips" they are ISO 8764-1. ISO 8764-1 was designed to work with phillips, JIS and DIN 5260 and to supersede all three of those standards. Note that the reverse is not true, a true phillips driver will damage an ISO 8764-1 screw. However AFAIK only american companies are still making oldschool drivers. Japan has retired JIS in 2008 and Germany retired DIN 5260 in 2001 and both have switched to ISO 8764-1 so pretty much any cross head screw or driver you get from Asia or Europe now will be made for ISO 8764-1. Like with JIS screws the flatter and more vertical driving surfaces on ISO 8764-1 drivers greatly reduce the tendency to cam out.
NO WAY...😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😳😰😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😶😶😶😶😶😶😶😶😶😶😶😶😶😶😶😶💀
Wtf this shit funny
Haha he said shaft
These are great drivers but do not believe that you are gonna move a 600 lbs tool box you'll be lucky to move a 30 lb. Box
....and yet I moved it in this video.....
I see that and I'm calling bs I'm not saying they don't bite I bought a set because of this review and they are far better than any screw driver I ever owned but there is no way they will do this
I must have had the oompah loompas pushing it...
@@RealToolReviews that box is like 6' tall I'm not saying they aren't good but you don't have to bull shit people into buying tools
Jeez. You would have saved time by just shouting "HOW STUPID ARE YOU FOR NOT BUYING THE INSULATED DRIVERS?!?!"
Are these made in Germany? Their website is terrible and doesn't really say anything useful!
Made in the Czech Republic , only shown on some tools , the german address is the headquarters........
Everyone says in these review videos that insulated is to prevent you from being shocked. Nonsense. I’ve never used a tool grip that didn’t. Insulated is to keep you from shorting shit esp sensitive expensive parts.