Enjoyed the video. I worked on a smaller RC rig operation before. We provided all our own meals, and it was tough work. Our pads were carved out of mountains with the rig deck split at 45 degrees, drilling -35 angles. We only drilled 1000 ft (~300 m) on these holes. Weatherford looks like driller's heaven to me.
I Flew through midland texas and talked with a guy who once worked on a rig. His leg and arm where mangled in a rig incident. He said it happens more often then not, lots of messed up guys for life. Dangerous job
The accommodation and food look bloody awesome! Seriously considering going into either offshore or this type of stuff, but having only worked in hospitality and mainly f&b to be exact I really wondering what the chances are of getting hired.
@@Hedriks any advice m8 I'm a Brit but I'm looking for a new start I don't really wanna spend the whole of my life in one country, i'm 28 with no rig experience, advice?
Serious question from a american-german: Why does someone get into a job in the oil-industry nowadays with outdated fossil fuels declining rapidly? Really, food? It´s really interresting! Don´t you believe that in at least 10 years you will bitching around about loosing your job? Why don´t get a job at a more modern industry which will be there until u retire?
When my dad went to war, he said they were fed well at camp. Just like these boys. And then he reminded me.... they weren't there for a picnic.... they were there to do a job.
One rig I did service was about 25 miles offshore. A 30 minute helicopter ride. 4 hours in a cargo boat when it was too foggy for a helicopter and too rough for a crew boat.
Working for Weatherford in ADM(Abu Dhabi Manufacturing and Services) and Great Environment while providing the world best Tools for oil wells. Safety is the number one priority in Weatherford.
That is a bad ass crew quarters. I heard a super single sucks. Working underbalanced wells are pretty laid back. We have them 30 day from beginning to T.D.
i got my 1st jump by showing up on site asking if there were any no shows. there was a guy hung over and didnt make it in what they didnt know was that was my dad and he told me to just go take his job. i missed the 80,s and the no red tape
Wyo AnCap I've done a bit of exploration work in Regional WA. The summer heat during January/February is nearly unbearable. It feels like you are working in a furnace.
I've been on many many drill rigs and not one has ever been that spotless, mud,snow,ice ,may be in Australia, I'm talking about north Dakota, good movie though , clearly safety is your number one priority, I'm impressed
its just hot and dusty here not much snow around and you can bet they gave a rig a good clean up before filming for the boss or it was the 1st day there and they hadn't made a mess yet
Man this shit is easy, would love to work in Australia, been on rigs since 08 ain't ever seen catered camps. These Montana North Dakota winters are getting old.
I worked in a onshore production platform in Rajasthan, India in the wells side and the accommodation was great, and the food was out of the world..something like 50 different items on the food menu everytime
Hello brother..I am KATHIRAVAN petroleum engineering graduated 2021 still i have been searching job on rig...Am really enthusiastic to work in rig and I had applied so many companies but no one call me to the interview, I don't know where I did a mistake..and how can i improve my career skills. Please recommend any advice and ideas to get a job
I worked for Ensign for 4 months. You had one small room with two bunk beds in it. One bathroom for everyone to share. No food was provided. Driller and tool pusher didn’t care about safety as they smelt of whiskey every day. That being said I enjoyed the work. But the morale of that specific rig was horrible.
Here we go. Roustabout, Floorman, Derrickman, Assistant Driller, Driller, Tool-Pusher, Tour-Pusher, (Company Man) Motorman is not part of the drill crew in my world. When i think of what "Bernard Duroc Danner" did with Weatherford it makes my blood boil!......Get injured and see how well Weatherford treat you!
When I was working rigs we didn't had a camp, had a small caravan, parked it nearby at a farmers place, cooking my own food, or take out chinese. You guys are spoiled now every 3 hours food. Shit wish I was young again.
Hello, it's a pleasure to meet you here, My name is Andy Lee, I am from Shanghai, China. But I live and grow up in Sweden. Where are you from and what is your name. I would love to know you better, I am an engineer, I got contracts from different oil companies. This is my business whatsapp +393511125507 and email goodengineer177@ gmail.com Please add me or send me yours and let me add you so we can chat there?
Nabors in Williston North Dakota will Joe just about anyone who can pass a drug test, assuming you live in the United States. Don’t expect this quality of life though lol.
my friends like doing offshore work how many singles men who works off shore all over the world ??? can you tell us ? yes or no.. thank you for the show. good show.
Hey guys. Is it easy to land a job as a leasehand if you're looking ti switxh over from an office job? I'm Canadian, I'd like to try this out in Australia. Pay's better and it's not cold as fuck as in Alberta
I work in AU and US. AU is the place to be as far as easy work. But US is definitely the place to be if you want to gain the most experience, in my opinion.
Just got my first job on oil rig 109 in alberta, i leave end of month as a floorhand, i CANT WAIT. THANK YOU FOR MAKING THIS. Drillers in alberta make between 50$ PH up to 102.73$ was one ad i saw.
+Zack Dänekas Not certain about the points made but ,if anyone else wants to uncover become an oil worker try Alkarno Oil Work Alchemist .Ive heard some unbelievable things about it and my neighbor got great success with it.
CounterStrike211 I know plenty of riggers and they are completely normal but every single guy in this video was a fucking spastic? Even the managers could hardly string a sentence together lol.
I’m a mechanic in the oilfield. I come in and help set up the production equipment and repair and maintain it after the drilling process. 20 yrs experience working on natural gas engines and compressors. I’m in the USA, how is the job opportunities over there for the work I do
Dev PlayzYT things are much different since then...al lot of more safety rules to follow to help prevent that type of incident...plus that was more of a “ who is bigger” type of problem
It's my ambition to work for an offshore jobs .A graduate of mechanical technology.10 years experience machinist and 2 years pipefitter at al mojil group KSA
I used to do roustabout rig up and rig down. And we'd rig wash ND them mud holes and them shakers were nothing to fuck with lol spend about 22 hrs in mud holes all day And you'll see why you get payed so much h for oil field.
I worked with you guys, in Mexico, I was a floorhand, my respects, is one of the most dangerous jobs ever.
Enjoyed the video. I worked on a smaller RC rig operation before. We provided all our own meals, and it was tough work. Our pads were carved out of mountains with the rig deck split at 45 degrees, drilling -35 angles. We only drilled 1000 ft (~300 m) on these holes. Weatherford looks like driller's heaven to me.
This rig life is heaven like as compared to most of the rigs I have been.
Yeah in Australia they are all way smaller and easier to work on. Plus they supply you with awesome food 24/7
and they are super strict on hours. You rarely work over 12
This is the recruiting video, the actual realities change on site.
It's actually not that much different from the video in Australia. They have it good. If I was single I would gladly stay on hitch a shit ton.
George Antony true
I Flew through midland texas and talked with a guy who once worked on a rig. His leg and arm where mangled in a rig incident. He said it happens more often then not, lots of messed up guys for life. Dangerous job
Boomers and there storied lol this ain't the 20th century safety standers are much more rigged
@@jd6681 especially if they’re company was horrible too
Or you can't pay attention to simple instructions. People learn the hard way sadly
"When do you get to eat a tbone at work?"
As a texas oil worker id have to say every other day probably
The new fella “Put out and didn’t mind getting down and dirty”! Moved up the ranks quickly......
Think I’ll stay away from the rigs!!!
Your all good as long as you keep your head down and your bum up! Lol
currently looking into a drilling job and this is an eye opener!!!!! 1+
son I don't think that you will just jump into a drilling job at least on a real rig which isn't the case in this vid. just an eye opener!!!!
This rig is different
I'm sold. I'll would love to be a Weatherford starting out worm hand.
The accommodation and food look bloody awesome! Seriously considering going into either offshore or this type of stuff, but having only worked in hospitality and mainly f&b to be exact I really wondering what the chances are of getting hired.
prepare for it if you're serious
@@Hedriks any advice m8 I'm a Brit but I'm looking for a new start I don't really wanna spend the whole of my life in one country, i'm 28 with no rig experience, advice?
Lmao your chances are slim to none . Well
Maybe you could be a chef
@@Weldor123 huh?
@@Weldor123 Nonsense. Everybody, can work with this, IF they are willing to work.
It's fun , been on triple stand n a double n a single stand as a rousty, floorman ,derrickhand n as of now AD Hard work N be safe guys
I would move to Australia right now to get to work with a competent team in a healthy environment.
Definitely safety is first and team work is needed all the time.
Just got my first job on oil rig 109 in alberta, i leave end of month as a floorhand, i CANT WAIT. THANK YOU FOR MAKING THIS
Nice one but how should of applied here Australia's warm
Where do I apply?
@@nelzelpher2088 everybody is hiring. They are all flat out. If your not in camada i cant help you.
@@whoispriest you’re a roughie you can’t help anyone 😂
@@whoispriest hello. Do they hire newbies?
These men are Elite 100% respect to them
I also work in weatherford rig 144 before for 4 months on the same position,a loader/forklift operator!
Can you connect me
I'd love working on that rig out there!
You guys are awesome man keep rocking
food every three hours!!! that alone makes me wana work for weatherford
NO KIDDDINGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
Dou you wanna work in the Rig machine Just for food?
Serious question from a american-german: Why does someone get into a job in the oil-industry nowadays with outdated fossil fuels declining rapidly? Really, food? It´s really interresting! Don´t you believe that in at least 10 years you will bitching around about loosing your job? Why don´t get a job at a more modern industry which will be there until u retire?
When my dad went to war, he said they were fed well at camp. Just like these boys. And then he reminded me.... they weren't there for a picnic.... they were there to do a job.
Can anyone hear give me advice on how to apply here?
One rig I did service was about 25 miles offshore.
A 30 minute helicopter ride.
4 hours in a cargo boat when it was too foggy for a helicopter and too rough for a crew boat.
Working for Weatherford in ADM(Abu Dhabi Manufacturing and Services) and Great Environment while providing the world best Tools for oil wells. Safety is the number one priority in Weatherford.
13:20 - " There is a bloke here who has gone up the ranks really fast cause hes…..put out" Hahahah
That is a bad ass crew quarters. I heard a super single sucks. Working underbalanced wells are pretty laid back. We have them 30 day from beginning to T.D.
Moralez Family where do you work , hook me up with a job
this dudes loock high af xd enjoyed the video. Keep the work up! greatins from switzerland
I’m starting work with my dad soon who I barely get along with. getting 2 or 3 weeks experience in the industry will be good.
i got my 1st jump by showing up on site asking if there were any no shows. there was a guy hung over and didnt make it in
what they didnt know was that was my dad and he told me to just go take his job. i missed the 80,s and the no red tape
eric johnson i miss the spinning chain!!
I want to do job in this places.
eric johnson funny lol
lol
I've been on some Colorado rigs that the temp was 100+. I can't even imagine Aussie heat.
Wyo AnCap I've done a bit of exploration work in Regional WA. The summer heat during January/February is nearly unbearable. It feels like you are working in a furnace.
Hahahaha. No thanks.
Luckily they take lots of breaks for water. They take it pretty seriously.
Try 50 below .. and do this . Canada Baby
@@gsharp1860 A true Canadian I see, always trying to one up everybody in any conversation. Get the same temps in Wyoming baby. You're not special.
I've been on many many drill rigs and not one has ever been that spotless, mud,snow,ice ,may be in Australia, I'm talking about north Dakota, good movie though , clearly safety is your number one priority, I'm impressed
its just hot and dusty here not much snow around and you can bet they gave a rig a good clean up before filming for the boss or it was the 1st day there and they hadn't made a mess yet
Guys I miss Weatherford so much 😭I wish that we can start working again soon
Man this shit is easy, would love to work in Australia, been on rigs since 08 ain't ever seen catered camps. These Montana North Dakota winters are getting old.
Hard work but worth looking in to it :)
advice?
I worked in a onshore production platform in Rajasthan, India in the wells side and the accommodation was great, and the food was out of the world..something like 50 different items on the food menu everytime
Hello brother..I am KATHIRAVAN petroleum engineering graduated 2021 still i have been searching job on rig...Am really enthusiastic to work in rig and I had applied so many companies but no one call me to the interview, I don't know where I did a mistake..and how can i improve my career skills. Please recommend any advice and ideas to get a job
Looks like one of those singles , you drill one at a time , no board .
I worked for Ensign for 4 months. You had one small room with two bunk beds in it. One bathroom for everyone to share. No food was provided. Driller and tool pusher didn’t care about safety as they smelt of whiskey every day. That being said I enjoyed the work. But the morale of that specific rig was horrible.
Man, I need to move to Australia!
Deepwater Horizon brought me here but this is probably different as this appears to be on land. Informative peek into the rig guy's lifestyle.
This type of land work is unheard of. They are using hydraulics which make it a lot safer. Roughnecks in Russia and America don’t have it so easy
the soundtrack tho, banging af
weatherford, do your employees enjoy being leasehands? do they get trained before starting work cheers.
Yes
I don't have any family so it wouldn't be a problem working off. I work 13 hours in warhorse now
anyone else catch the pun at 8:24
rig-ulations! HA!
Good vid mate, just wanting to know how to go about getting a entry level job there?
Here we go. Roustabout, Floorman, Derrickman, Assistant Driller, Driller, Tool-Pusher, Tour-Pusher, (Company Man) Motorman is not part of the drill crew in my world. When i think of what "Bernard Duroc Danner" did with Weatherford it makes my blood boil!......Get injured and see how well Weatherford treat you!
accomodations are superb
Lol all the floorhand does is dope the pins, thats easy money all day right there, 24 hrs on D&C side for me!
Thats total bullshit
great video !
Very good video love u dear oil and gas industry
Having type 1 diabetes insulin dependent but fit n strong person , do you think this medical condition would rule me out on the Riggs ??
Swear i've met that Peachie guy. But I want to say he was a pusher on a work over rig. Don't remember what one though, couple years ago now.
Wow yummy food 😍😍👌🏽
Hi scoty, Jesus man!
When I was working rigs we didn't had a camp, had a small caravan, parked it nearby at a farmers place, cooking my own food, or take out chinese. You guys are spoiled now every 3 hours food. Shit wish I was young again.
Adorei!! Pretendo ter essa vida para mim!
Samaya , a Weatherfod realizou seleção para Africa,senão me engano ainda estão recebendo Cv´s.
Hello, it's a pleasure to meet you here, My name is Andy Lee, I am from Shanghai, China. But I live and grow up in Sweden. Where are you from and what is your name. I would love to know you better, I am an engineer, I got contracts from different oil companies. This is my business whatsapp +393511125507 and email goodengineer177@ gmail.com Please add me or send me yours and let me add you so we can chat there?
is the salary the same offshore vs onshore? I've never seen a job like this on land
what is the job title?
Actuality in the offshore you will have more salary, maybe an increase by 20-25%
There are rigs on land in canada too.
in rug how much salary will get
lol Logic suggests that offshore would pay far far more lol
If working a land rig, you are mostly put up either on location in a trailer or hotel room at the nearest town.
...with one trailer as the mess hall.
12:35 - So that's where Holly from the Office ended up working..
its always my dream to be a roughneck. . someday 😢😢
have you done it yet?
Nabors in Williston North Dakota will Joe just about anyone who can pass a drug test, assuming you live in the United States. Don’t expect this quality of life though lol.
LMFAO. I'm a contractor in the oilfield and never see any rigs with setups like this!
Brian B. Well u don’t know shit then!!
Go to AU. Most of them are similar
I like the job, I worked on rc rig
I start Tuesday with universal and I cannot wait to get out there and get started
Donivan Karfelt get on a rig with Patterson fuck that pressure pumping shit.
Been in the patch for 5 years now best years ever worst too ;)
where do you work?
Fk this makes me appreciate being a forklift tech.
my friends like doing offshore work how many singles men who works off shore all over the world ??? can you tell us ? yes or no.. thank you for the show. good show.
Damn , my trailer looked nothing like that lol. Bunked with 8 guys in one nasty trailer was the worst part.
I have done be electrical and electronic engineering wh role is suitable for me on oil rigs
How to have an entry level in your company?i'm a loader/forklift operator working in the rig here in saudi arabia!
ഏത് കോഴ്സാണ് ഈ ജോലിക്ക് വേണ്ടി പഠിക്കേണ്ടത് - അത് എവിടുന്ന് കിട്ടും
I worked this work for 27years it's hard ass work it will make a man out of you
How can I get into this?
Or is it an old man out of you?
Am currently working as drilliar in Nigeria I must confess I will like to work in Australia with a good team
Time to buy Weatherford!
I figured because of the coriolis effect that the bit would be turning to the left...damn u globe!
I came for the Vegimite!
Hey guys. Is it easy to land a job as a leasehand if you're looking ti switxh over from an office job?
I'm Canadian, I'd like to try this out in Australia. Pay's better and it's not cold as fuck as in Alberta
12 to 12 that’s bad ass sure beats 7 am to 7 pm
I would really like to see the differences between rig life in AUS and different areas of the US, Asia etc.
I work in AU and US. AU is the place to be as far as easy work. But US is definitely the place to be if you want to gain the most experience, in my opinion.
Canada is the place to be if you just want to be cold wet and pissed off.
catlife Aussies go harder
This shit is incredible
Just got my first job on oil rig 109 in alberta, i leave end of month as a floorhand, i CANT WAIT. THANK YOU FOR MAKING THIS. Drillers in alberta make between 50$ PH up to 102.73$ was one ad i saw.
MADE A VIDEO HOW I DID IT, GO HAVE A LOOK
MADE A VIDEO HOW I DID IT, GO HAVE A LOOK
this is why WISE men all over the world go MGTOW, learn more about MGTOW here: czcams.com/users/SandmanMGTOWvideos
I would move there from the us to work for them that looks like a good company to work
I would like to have this job, just graduated
These people had no idear how pampered they were. Kids dream of those times and they will never get a job like this.
Bullshit
@@mathewross2795 Average offshore engineering job has gone down 30-50 % in pay.
@@mathewross2795 Elaborate?
damn i wanna work for this place! this looks awesome
+Zack Dänekas
Not certain about the points made but ,if anyone else wants to uncover become an oil worker try Alkarno Oil Work Alchemist .Ive heard some unbelievable things about it and my neighbor got great success with it.
how to achieve entry level position?
CounterStrike211 I know plenty of riggers and they are completely normal but every single guy in this video was a fucking spastic? Even the managers could hardly string a sentence together lol.
Where's the chains. We slung chains on my old Patterson 379
Jack of Blades i dont see how their spastic. They seemed to make and get to the point quite well.
Work, work, work with SAFETY that is BASICS of OIL & GAS INDUSTRY Comprising all BRANCHES of ENGINEERING.
Dude I worked on H&P flex rig 3 and I want to apply to weatherford
Bro can marine engineer work on offshore rigs?
Brokeback Oil Rig new movie coming out 2018
If you don't have a Derrick hand are you really working on a drilling rig?
This is working paradise
I would like to work here how do i apply.
I’m a mechanic in the oilfield. I come in and help set up the production equipment and repair and maintain it after the drilling process. 20 yrs experience working on natural gas engines and compressors. I’m in the USA, how is the job opportunities over there for the work I do
Noongaa top man
This is why I went Mainline
The fuckin music kills me
Life on the Rig this a good Idea.
I don't wanna be an oil rig worker since I saw the movie Deep water Horizon
Dev PlayzYT things are much different since then...al lot of more safety rules to follow to help prevent that type of incident...plus that was more of a “ who is bigger” type of problem
Compared to offshore, onshore there's A LOT of space to run away.
Don’t fear pressure, respect it!
It's my dream to work in Weatherford
very fancy rig...
Looks fun
It's my ambition to work for an offshore jobs .A graduate of mechanical technology.10 years experience machinist and 2 years pipefitter at al mojil group KSA
They might work 12 hours but they're paid for 24
I used to do roustabout rig up and rig down. And we'd rig wash ND them mud holes and them shakers were nothing to fuck with lol spend about 22 hrs in mud holes all day And you'll see why you get payed so much h for oil field.
Question is do you get paid on your days off ??
Jarod Davis yup you get paid living allowance of $140
We had to borrow the company mans spare tyre for a rig move at ensign energy..... yupp
How is geting the job?