It worked. No more parasitic draw. Truck starts up in the cold everytime. No random chime with door open. You rock brotha! Thank you for the quality content!
Thanks for the video. I have the same problem. The battery was always drained and I have to charge it whenever I need to drive. You saved me lots of money.
Thank you for making this video ! I probably wouldn’t have done it if I didn’t see a how to and would of end up paying hundreds to get it replaced. Someone tried to take my truck and drilled the whole key slot open . Thank God I had a anti theft immobilizer . They didn’t take it .
same with me but they mangled my door lock cylinder and ripped apart my steering column plastics. little did they know my rear slide window cant lock because the latch is broken. thankfully they didnt take it because from what ive read my year is a pain to hotwire
We are having this same exact issue with our truck! Thank you for your video, I will get right on this, tired of having to charge the battery every other day!
Excellent! I have the Dorman piece in front of me now. I saw the "learning" cylinders available but bypassed them because l figured they were sone kind of diagnostic gizmo... that's what happens when you think you know everything. I figured I'd just have another key to deal with forever. I'll be getting the learning cylinder instead... way better. Thanks.
I did a heater core on my 02 4.7 , reinstalled everything, replaced air bag , ignition switch , had scanner hooked to truck , said lost communication between key and abs module , everything is brand new including clock spring, any ideas why air bag light is still on ?
That is puzzling. If everything is connected and good , it could be the abs light needs erased or reset. Wish I could be more help, Thanks for watching.
Just tried doing mine my original key wouldn’t shut the truck all the way off. So I bought a new ignition to replace and put it in but once it was in it wouldn’t release the key any tips?
I would try and start the twist procedure over. Then if no luck just try turning any which way until it releases. , if it does not work , simply send it back for another replacement . Hope this helps.
My key is pretty worn. I was thinking maybe I could just go to a dealer or lock smith with my VIN number and get a new key and then use this product. Am I correct? The dealer want over $500.00 for key, then program it, and put in a new ignition switch plus labor. A lock smith was not mutch better at $490.00 estimate. Thank you
I would go this route link below . It will come with 2 new keys and new cylinder for the ignition and door . Now having said that I am assumimg yours is black and not the chipped gray. However if you have the gray this seller can provide that also , but that will need programmed by the locksmith. They should not charge much , also as long old chipped key is on key ring it may work also. This link is just a suggestion there are many options. Anyways hope this helps. ebay.us/4u6OZ5
I’m curious how did you get the cylinder to go to the restroom way in because I’m moving mind around it won’t go thanks in advance nice video by the way
Good day, please sir I'm an automobile locksmith, i have this type of vehicle but i lost the key, please will there be any issues if i reset the ignition cylinder with another key?
If it does not have the immbolizer key , it will be no problem at all , besides needing the door lock changed as well. If it has the immobilizer , it would need programmed with a good scan tool. Thank you for the feedback.
So my key wont turn cant push button to release the cylinder. Any ideas....? I have chrysler aspen not that it matters but my key will not turn at all.... Completely lost on how to fix this thing without the key turning....grrrr
No , that is the great thing about this part you get to use your existing key. The key cylinder is replaced , the immobilizer if equiped with yours will not be replaced . So in short your transponder key will work just as before. Great question and thank you for watching.
Just order it. Thank you so much. My problem is that the ignition will not turn. I tried my key that isn't as worn out but same issue. I'll let ya know how I make out.,
If the key still works the door lock fine , then I would replace the ignition cylinder. I have remove tumblers from them to get me by until I replaced them before. This usually allows it to turn easily. Thanks for the feedback.
It worked. No more parasitic draw. Truck starts up in the cold everytime. No random chime with door open. You rock brotha! Thank you for the quality content!
Good to hear , thank you for watching.
@@s33therfan thank you for fixing my truck!
Thanks for the video. I have the same problem. The battery was always drained and I have to charge it whenever I need to drive. You saved me lots of money.
Love this kind of feedback. Thank you for watching.
Thank you excellent, saved me dollars. 20 minutes had this installed with detailed video you provided.
Thank you very much for the great feedback , I know this part is great. Saves a trip to the locksmith.
Thank you for making this video ! I probably wouldn’t have done it if I didn’t see a how to and would of end up paying hundreds to get it replaced. Someone tried to take my truck and drilled the whole key slot open . Thank God I had a anti theft immobilizer . They didn’t take it .
Sorry to hear that , but good you had the immobilizer on yours. Glad this fixed your issue , thanks for watching.
same with me but they mangled my door lock cylinder and ripped apart my steering column plastics. little did they know my rear slide window cant lock because the latch is broken. thankfully they didnt take it because from what ive read my year is a pain to hotwire
We are having this same exact issue with our truck! Thank you for your video, I will get right on this, tired of having to charge the battery every other day!
Thank you for the excellent feedback.
Thanks for this video. I got the same lock cylinder as you bought. Now I dont have to worry about my battery draining.
Exactly , mines been working perfectly ever since. Money well spent for sure.Thank you for the feedback.
Thanks for sharing, I’m having the same problem with my 2004.
Glad this could help , thank you for the feedback.
Thank you, just ordered it!
Thank you very much.
Thank you. I’m getting it from your link.
Thank you for watching.
Thanks for the coaching !
You bet! Thank you for the feedback.
Thank you I just did mine thanks to you
Thanks for taking the time to leave great feedback , much appreciated.
I like your video it teach me a lot thanks.
Thank you for the great feedback , it is much appreciated.
Thank You. Hoping this works on mine!
Thank you for the great feedback and thanks for watching.
Thank you great video!!
Thank you for watching.
Gracias amigo! This is a great video … 👏
Glad it helped , thank you for the great feedback.
Thank you, this really helped me fix my truck.
Thank you for watching.
Great video, straight and to the point. Did you have problems with your a/c with the old ignition?
Not any issues with the a/c. Thanks for watching.
Excellent!
I have the Dorman piece in front of me now. I saw the "learning" cylinders available but bypassed them because l figured they were sone kind of diagnostic gizmo... that's what happens when you think you know everything.
I figured I'd just have another key to deal with forever. I'll be getting the learning cylinder instead... way better. Thanks.
Thank you for the terrific feedback.
Thank you, my man. Good job,I have a 2002 ram myself. My key would sometimes lock ,I had to play with it to get started. Thanks 😊 🫂 🙏
Glad it helped , thank you for the feedback.
I did a heater core on my 02 4.7 , reinstalled everything, replaced air bag , ignition switch , had scanner hooked to truck , said lost communication between key and abs module , everything is brand new including clock spring, any ideas why air bag light is still on ?
That is puzzling. If everything is connected and good , it could be the abs light needs erased or reset. Wish I could be more help, Thanks for watching.
Just tried doing mine my original key wouldn’t shut the truck all the way off. So I bought a new ignition to replace and put it in but once it was in it wouldn’t release the key any tips?
I would try and start the twist procedure over. Then if no luck just try turning any which way until it releases. , if it does not work , simply send it back for another replacement . Hope this helps.
My key is pretty worn. I was thinking maybe I could just go to a dealer or lock smith with my VIN number and get a new key and then use this product. Am I correct? The dealer want over $500.00 for key, then program it, and put in a new ignition switch plus labor. A lock smith was not mutch better at $490.00 estimate. Thank you
I would go this route link below . It will come with 2 new keys and new cylinder for the ignition and door . Now having said that I am assumimg yours is black and not the chipped gray. However if you have the gray this seller can provide that also , but that will need programmed by the locksmith. They should not charge much , also as long old chipped key is on key ring it may work also. This link is just a suggestion there are many options. Anyways hope this helps.
ebay.us/4u6OZ5
Thank you for the response
I’m curious how did you get the cylinder to go to the restroom way in because I’m moving mind around it won’t go thanks in advance nice video by the way
Sorry for the late replay , but basically turning it until it lined up the way it needed , allowed it to seat fully. Thanks for watching.
Dose changing my key cylinder will keep my truck from starting
Not at all , and that is the great thing about this device . This allows you to keep your original key. Thanks for the feedback.
Awesome info, my key won't go fwd sometimes ,I'm gonna replace cylinder but my question is ,will any cylinder work ,? Don't it have a PATS key ?
Yes , it will work with this kit. Thanks for watching.
@@s33therfan amqzon just dropped it but it's dark now so tomorrow it is!
Where did you get that t-20 tool at ? I need one !
I believe I picked them up from harbor freight. Thanks for the feedback.
Good day, please sir I'm an automobile locksmith, i have this type of vehicle but i lost the key, please will there be any issues if i reset the ignition cylinder with another key?
If it does not have the immbolizer key , it will be no problem at all , besides needing the door lock changed as well. If it has the immobilizer , it would need programmed with a good scan tool. Thank you for the feedback.
So my key wont turn cant push button to release the cylinder. Any ideas....?
I have chrysler aspen not that it matters but my key will not turn at all.... Completely lost on how to fix this thing without the key turning....grrrr
You will have to drill it out. Watch a few videos on the process before trying it. Thanks for the feedback.
Will this process be same on 2004 ram 1500 ?
As far as I know the key cylinder is the same. Thanks for the feedback.
Where do I get that part
Here's the link, thanks for watching.
amzn.to/3HG9dpZ
I wish my lock cylinder did that.
Did u have to reprogram the key? Does it need to be program ?
No , that is the great thing about this part you get to use your existing key. The key cylinder is replaced , the immobilizer if equiped with yours will not be replaced . So in short your transponder key will work just as before. Great question and thank you for watching.
Ok you just answered my question, thank u!!!!
Just order it. Thank you so much. My problem is that the ignition will not turn. I tried my key that isn't as worn out but same issue. I'll let ya know how I make out.,
Just finished the install. Slicker than snot. Thanks again
Hope this fixes your issue. Thanks for watching.
@@s33therfan It did indeed
How did you get the old cylinder out if the key didn’t turn?
Mine won't turn someone told me use a small hammer I worked a few times now it doesn't why would it not turn I'm sure it's worn out but what
If the key still works the door lock fine , then I would replace the ignition cylinder. I have remove tumblers from them to get me by until I replaced them before. This usually allows it to turn easily. Thanks for the feedback.