Truck looks awesome! Have you considered blacking out the F150 emblem and pealing off the FX4 sticker on the back? It made a huge difference on my truck!
Your truck looks good!!🔥 I did the RC vertex coilovers with a 1.5" spacer and the ride is amazing. Also recommend the 2.5" rc vertex rear piggyback shocks. I hope you do some more content.
Same here thanx bro. I have a 07 f150 XLT and I’m trying to do a set up like your. I didn’t know if 26x14 on 37’s would fit on a 6 inch lift? But I found your channel while looking this up
Nice ride bro! I just got my lifted. It’s a 2019 F150 XLT with 6” RC Vertex coil over. On 35x 12.5 nitro. Wheels 22x12 I’m very happy RC. Very smooth ride!
A 1 inch inch spacer on top of a rough country 6 inch strut bds uppers. 2 inch add a leaf in the rear and some trimming on the front rear fender a tab bit of trimming on the front flare rear portion of the front flares thats what it took to clear those 37s that 1 inch spacer kept me from doing and trimming on my front bumper at all
Yo quick my truck isnt a 4x4 so it sits a half inch lower then the back stock i have 24x14 and i was going to get a 6in rough country lift and add 2in or 1.75in to it i cant find a 1in no where im not really doing any offroad…..its just the look for me any advice??
What size tires? Are you talking about a adding a leveling kit spacer in the front ontop of the 6 or are you talking about the rear of the truck. You have no cv axles in front so you should be straight with whatever in the front and if you wanted to bring the back up just do a add a leaf in the rear hopefully I answered your question if not just hit me back
Nice build brother…I just installed a rough country 6” lift kit, I used the loaded struts and added a 1.5” leveling kit on top of it I also replaced the upper control arm with a KSP…I have a issue with my angles the UPC is touching the spring…what could be causing this problem? Thank you.
I could daily drive it. It rides like factory if not better. Yes newer trucks ride like cars now. You could daily a lifted truck. What really matters is your commute i assume. I drive my truck to work ,daycare, and school no problems. I do drive a car mostly to work but yes you could daily a lifted truck 👍
Looks badass! I'm running a 6"rough country on my F-150 and it is also the basic kit it rides great but I was thinking about getting those upgraded shocks as well how much do they run$? I was also thinking about adding a 1.5 in leveling block to it do you think that is possible if I just put it on the original setup?
You can stack a leveling kit on top of a lift strut only but you’ll need to compensate your upper control arm angles for the stack. I recommend using pro comp upper control arms they have huge ball joints for more travel
Definitely get a 8”+ lift. I have a 6” bds lift on my 16 F150. I just bought 24x14’s with 33’s on them and I am gonna have to do a lot of trimming. I took them back off because I couldn’t turn
I like the rough country strut they say the bilstein is a good option as well may even be better i think either would be leaps and bounds ahead of the spacer
are those uppers for 2 inches of lift or are they the same as factory uppers? i wanna do a 2inch level on mine but RC says the steering knuckle is meant to fit factory uppers and not aftermarket, but you’ve obviously shown me otherwise, could you link the uppers you have?
Eliminate the the stock 6 inch space use either a 6inch coilover or a full 6 inch rough country strut assembly with a 1 or 1.5 leveling kit on top idk if a 1.5 would work i had a 2 inch and it didnt work but i know for sure a 1inch will work on top but then again i do got aftermarket uppers you just gotta see trial and error. Thats what i did
I got the 1.5 on a couple of weeks ago and it looks and rides good only thing is that it makes a clacking sound every now and then cause I'm stacking eventually I'm getting the Bilasteins
It rides i would say better than factory but it also depends on your wheel and tire setup the less aggressive the tire also 14 wides make a difference in my opinion. Stock wheels on my truck would prolly ride better than factory
Had to trim a bit none to the front bumper with that 1inch level kit on the top of the rough country 6 inch strut but i can do full turns now and back into spots without any issues now slight rub but not enough to notice anymore
I did the same thing but i put a 2.5 level on top ..my cv angles are nt great but I'd like to go with that wheel and tire setup and thought thats what I'd need for lift.
Youll def have no problem with clearance if you got a 2.5 on top of you 6 inch but still may have to trim the rear front fenders a bit. I tried a 2 inch on top and my uppers couldn't handle it and also my ball jonts boots busted on my aftermarket bds uppers after riding around like that so i went down to a 1 inch but yeah you'll def be able to clear those 37s also i have a 2 inch add a leaf in the rear btw
Stock gears i did put a programmer on the truck but its on economy mode. I bought the programmer to recalibrate the speedometer. But as far as highway speed it pulls bc the day i got it out the shop i got a ticket for going 86 in a 65 bc my speedometer was thrown off with the 37 inch tire. So it will still ride stock my speedometer was saying 75 so i had to get that fixed but that 3.5 i know in the 17 up f150 is badass
I haven't had any problems but i just drive the truck locally daily occasionally to work but i dont put much wear and tear on the truck i dont really tow that often either. No problems with it thus far
@@bad_boosted_platinum7515 ok kool not bad it look good I was going through videos on CZcams and your look the best where can I find these parts at and who install them for you
Next mod is definitely Cardio 💯 Out of breath from bending down and walking around the truck😳 You got this King🎩
Truck looks awesome! Have you considered blacking out the F150 emblem and pealing off the FX4 sticker on the back? It made a huge difference on my truck!
best overall f150 i’ve seen! looks so custom but it looks like they should come from the factory like this
Truck looks sick 🔥🔥
Looks good, love the way the wheels look on the silver truck. Good choice
Thank you
Nice truck bro! Set is 🔥!!!
Looks real good
Good looking truck bruh. You did good 💪 I just ordered my fabtech. 6" For my 2017 f150
Looks good!
Looks good 👍
Good looking truck bro 🔥
Thanks bro
Clean truck f-150 fam
Looks good bro keep it up👊
Your truck looks good!!🔥 I did the RC vertex coilovers with a 1.5" spacer and the ride is amazing. Also recommend the 2.5" rc vertex rear piggyback shocks. I hope you do some more content.
Man I got more stuff to updated and add to my truck but just not enough hours in the day with kids work and everything else going on I gotta do better
Nice truck.
Truck is fire my brotha!!!!!
Yall subcribe bro more content otw
Beautiful💪🏾
That is one bad ass truck man!!!!!!
I appreciate the love
Love your set up bro! 🦍🔥💪🏾
Y'all subscribe i got more content coming tons of add ons
Preciate the love bro
Same here thanx bro. I have a 07 f150 XLT and I’m trying to do a set up like your. I didn’t know if 26x14 on 37’s would fit on a 6 inch lift? But I found your channel while looking this up
Nice ride bro! I just got my lifted. It’s a 2019 F150 XLT with 6” RC Vertex coil over. On 35x 12.5 nitro. Wheels 22x12 I’m very happy RC. Very smooth ride!
Man people underestimate rough country I've had 3 lifts they have really stepped there game up
Love it I have same truck I’m next
Clean setup. I have a 6” bds might add a 1in level on top
Truck is 👌🏽👌🏽
24-14s are nice🏁
I agree 👍💯
Pressure 🔥
normally i like a little more tire but the truck is nice anyways man, roll tide!
Roll Tide bro
Fire 🔥 my platinum is the same color I think I should do the same
I don't think you could go wrong 🔥
Very nice. What did you add to the 6” lift to get those wheels/tires to fit? New subscriber here bro. 👍🏻
A 1 inch inch spacer on top of a rough country 6 inch strut bds uppers. 2 inch add a leaf in the rear and some trimming on the front rear fender a tab bit of trimming on the front flare rear portion of the front flares thats what it took to clear those 37s that 1 inch spacer kept me from doing and trimming on my front bumper at all
Nice setup. What is the overall height?
Do you rub with 37s ? I have 22x14 with 35s and they rub with a 6.5 inch lift
Yo quick my truck isnt a 4x4 so it sits a half inch lower then the back stock i have 24x14 and i was going to get a 6in rough country lift and add 2in or 1.75in to it i cant find a 1in no where im not really doing any offroad…..its just the look for me any advice??
What size tires? Are you talking about a adding a leveling kit spacer in the front ontop of the 6 or are you talking about the rear of the truck. You have no cv axles in front so you should be straight with whatever in the front and if you wanted to bring the back up just do a add a leaf in the rear hopefully I answered your question if not just hit me back
What is those offset on the rims
Nice build brother…I just installed a rough country 6” lift kit, I used the loaded struts and added a 1.5” leveling kit on top of it I also replaced the upper control arm with a KSP…I have a issue with my angles the UPC is touching the spring…what could be causing this problem? Thank you.
I wonder if I can do this on my 04.
True dat NICE
Does it ride bad? Or still feels close to stock? Can you have a lifted truck as a daily or best not too?
I could daily drive it. It rides like factory if not better. Yes newer trucks ride like cars now. You could daily a lifted truck. What really matters is your commute i assume. I drive my truck to work ,daycare, and school no problems. I do drive a car mostly to work but yes you could daily a lifted truck 👍
That shit is mean 🔥🔥
Thanks
Looks badass! I'm running a 6"rough country on my F-150 and it is also the basic kit it rides great but I was thinking about getting those upgraded shocks as well how much do they run$? I was also thinking about adding a 1.5 in leveling block to it do you think that is possible if I just put it on the original setup?
330 is how much they run i think there worth it. Do mean you running a 1.5 inch space on top of the big spacer in the front?
Yeah I was thinking about trying a 1.5 inch spacer on the top of original 6 inch spacer
Idk you may wanna ask whoever is gonna install i think thats stacking you might wanna look into it
You can stack a leveling kit on top of a lift strut only but you’ll need to compensate your upper control arm angles for the stack. I recommend using pro comp upper control arms they have huge ball joints for more travel
@@spaceghost5.0
.
I have a pro comp 6 inch lift on my 15 f150 it rubs my bumper how can I get it to quit rubbing my bumper 37x20x12.50
If you don't have a leveling kit on there you gotta trim front bumper alot that's why I didnt do it without a leveling kit personally
So you stacked a leveling kit on top on the b6 inch block up front
Beautiful truck brother…what brand spacer did you get?
I have a 2020 f150. Thinking about going with a BDS coilovers lift on a set of 24x14s on 35s. Think I would clear them with out cutting anything??
How tall with the lift be? What brand and type of tires 🤔? Possibly depending on those factors
6 inch BDS lift with coilovers going with a 35x12.50r24s gladiator M/T
Definitely get a 8”+ lift. I have a 6” bds lift on my 16 F150. I just bought 24x14’s with 33’s on them and I am gonna have to do a lot of trimming. I took them back off because I couldn’t turn
Does this set up rub at all?
Not bad
Those 6 inch struts ride good? Looking into new struts on my 18 limited. Don’t no what to do with for a better ride.
I like the rough country strut they say the bilstein is a good option as well may even be better i think either would be leaps and bounds ahead of the spacer
Does the tires rub pretty bad with that set up on the truck?
No some rub but not bad with trimming 35s I'm sure no rub at all
are those uppers for 2 inches of lift or are they the same as factory uppers? i wanna do a 2inch level on mine but RC says the steering knuckle is meant to fit factory uppers and not aftermarket, but you’ve obviously shown me otherwise, could you link the uppers you have?
Says 2-6 inch lift
@@bad_boosted_platinum7515 is there a part number or something cause i can’t find them lol
When you say you eliminated the spacer in the front do you mean the 6-in spacer from the basic kit or the 1-in spacer to had on top?
Eliminate the the stock 6 inch space use either a 6inch coilover or a full 6 inch rough country strut assembly with a 1 or 1.5 leveling kit on top idk if a 1.5 would work i had a 2 inch and it didnt work but i know for sure a 1inch will work on top but then again i do got aftermarket uppers you just gotta see trial and error. Thats what i did
I got the 1.5 on a couple of weeks ago and it looks and rides good only thing is that it makes a clacking sound every now and then cause I'm stacking eventually I'm getting the Bilasteins
@@spaceghost5.0 that bilstein should ride very smooth
🔥🔥🔥 How does it ride ? And do it rub? And what tint do you have on your truck
It rides i would say better than factory but it also depends on your wheel and tire setup the less aggressive the tire also 14 wides make a difference in my opinion. Stock wheels on my truck would prolly ride better than factory
5% tint all the way around
Had to trim a bit none to the front bumper with that 1inch level kit on the top of the rough country 6 inch strut but i can do full turns now and back into spots without any issues now slight rub but not enough to notice anymore
I did the same thing but i put a 2.5 level on top ..my cv angles are nt great but I'd like to go with that wheel and tire setup and thought thats what I'd need for lift.
Youll def have no problem with clearance if you got a 2.5 on top of you 6 inch but still may have to trim the rear front fenders a bit. I tried a 2 inch on top and my uppers couldn't handle it and also my ball jonts boots busted on my aftermarket bds uppers after riding around like that so i went down to a 1 inch but yeah you'll def be able to clear those 37s also i have a 2 inch add a leaf in the rear btw
What gears do you have in that ? Stock ? Any issues with power or highway speeds ?
Stock gears i did put a programmer on the truck but its on economy mode. I bought the programmer to recalibrate the speedometer. But as far as highway speed it pulls bc the day i got it out the shop i got a ticket for going 86 in a 65 bc my speedometer was thrown off with the 37 inch tire. So it will still ride stock my speedometer was saying 75 so i had to get that fixed but that 3.5 i know in the 17 up f150 is badass
@@bad_boosted_platinum7515 What programmer did you use and did it help with your fuel economy?
How’s the ball joints holding up on the 14 wides or anything around the area
I haven't had any problems but i just drive the truck locally daily occasionally to work but i dont put much wear and tear on the truck i dont really tow that often either. No problems with it thus far
how much something like this cost I have the same year mine is the xlt
About 6500$ parts and labor
@@bad_boosted_platinum7515 ok kool not bad it look good I was going through videos on CZcams and your look the best where can I find these parts at and who install them for you
Which 1 inch spacer did you use
Ebay item number 303704741517
What year is your truck? Nice truck
2018
What kinda rims and tires
24x14 xf forged 305 / 37 gladiator xcomp
How much they charge you?:.
650 labor 75 for alignment. I bought the parts myself
What was the tire size?
37x13.50r24
🥶💎
What is your MPG my friend
I can get 19-20 in moderation
@@bad_boosted_platinum7515 how is that possible with 37s? I have 15mpg with 35s
Niqqa why you sound like you bout 500lbs…😂😂. Nice truck tho
Roll Tide!
Roll Tide big dog!! I think the bulldogs may have us this year though if we make it to the sec champion
@@bad_boosted_platinum7515 yeah we in trouble! 😂😂
how old are you???? 18
What does my age have to do with this I'm confused with a name like Alice 💩
Do you rub
No