I was cutting corrugated roofing with a power drill attachment and I was disappointed with my Malco tool. I hope his tool is a good one. Any brand suggestions for an old man diyer. I switched to a diablo 48T metal cutting blade for my circular saw and whizzed right through all but the first panel. Disappointed with my Malco drill attachment. Could be operator error but I doubt it. Not too good for curves though. Good thing all my cuts were straight cuts.
Pretty fast with the scribers boys but 4-5hours by hand...I could do a standard house by hand and would take about a hour hour and a half...with scribers yeah half and hour on a good day! Good on yah mate.
Great Tool, would you please let me know cost, brand and/or if you sell directly? Are you near Flrorida, or can I purchase the tool in Florida... sorry for asking so many questions, :) !! What is the "Aprpiate"name for this tool if I would want to order or purchase one?
That wasn't trimdek by the way! It was monoclad... And I'd scallop that job by hand in far less time than 4 or 5 hours! Can't knock the skills of these guys though, but this video leaves a lot to be desired.... If you want good shear attachments for a good price, go for Malco or K Tool. For standalone metal shears, Makita or Milwaukee...
Peter Staples Turbo Shears can scribe! In fact, you can cut in line from straight to a right angle straight cut! I have the CM left and right jaw! Corro scallops are a waste of time even in BAL zones. Looks pretty though, but you may as well choose a more exotic profile when paying roofers to scribe flashing!
sirswift23 Please post a close up video of someone scribing with turbo shears? and post URL here. If roof caps were not scribed in in cane growing areas, they burnt to the ground, so they made it regulation to put the caps on by the building code and scribe them in as a good tradesman would.
There are a number of regulation methods to use without the need to scribe, but you're right, a good tradesman should fabricate everytime. Though the way the market is, specialized roofers replaced by cheap builders and carpenters who lack skills and knowhow.... There are those who instead of fabricating on site, search the city for a fitting and have never bent a flashing in their lives. I'm sure there videos on the Malco website by the way. If I remember, I'll send one in... Cheers
because to overpriced. . this company will be lost a lot.. will new companys can make this better a better price. .. always is been like that with tools.
I love Play School. Through-the-window segments are awesome.
wtf
Damn that cat has a few yrs under his belt
Throw some more snips on the barbey!
I was cutting corrugated roofing with a power drill attachment and I was disappointed with my Malco tool. I hope his tool is a good one. Any brand suggestions for an old man diyer. I switched to a diablo 48T metal cutting blade for my circular saw and whizzed right through all but the first panel. Disappointed with my Malco drill attachment. Could be operator error but I doubt it. Not too good for curves though. Good thing all my cuts were straight cuts.
Which mode is this and which company?
Where can i buy that one?
Pretty fast with the scribers boys but 4-5hours by hand...I could do a standard house by hand and would take about a hour hour and a half...with scribers yeah half and hour on a good day! Good on yah mate.
Were i can buy that and how mucg coast
តំលៃប៉ុន្មាន how much?
where to buy this?
Fast and Neat 👍👍👍
olá onde convivo consigo comprar essa maquina
oi amigo com faso para compra esta tezora
Cara preciso muito de uma dessas
How much the price of this tools
Que marca es la maquina ?
best price?
Great Tool, would you please let me know cost, brand and/or if you sell directly? Are you near Flrorida, or can I purchase the tool in Florida... sorry for asking so many questions, :) !! What is the "Aprpiate"name for this tool if I would want to order or purchase one?
Jacob Kikkert pp
Works good
Misto!!👌👉💶
Где купить можно?
I wanted this
There goes about 300 illegal alien jobs.
Di mna ada jual nya
Palácio das ferramentas tem galera.
Allen Mcdonald ally mac roofing wheres my money you owe me for working for you ripp of!
Hi sir I am roofing worker I wanted to this job your country
Please help me
How do to buy a pair of scissrs. ?
janio lucio go to wal mart
That wasn't trimdek by the way! It was monoclad... And I'd scallop that job by hand in far less time than 4 or 5 hours! Can't knock the skills of these guys though, but this video leaves a lot to be desired....
If you want good shear attachments for a good price, go for Malco or K Tool.
For standalone metal shears, Makita or Milwaukee...
Malco shear is a good tool "I own a set" but they will not scribe a roof cap, where the Powersnips will.
Peter Staples
Turbo Shears can scribe! In fact, you can cut in line from straight to a right angle straight cut! I have the CM left and right jaw! Corro scallops are a waste of time even in BAL zones. Looks pretty though, but you may as well choose a more exotic profile when paying roofers to scribe flashing!
sirswift23 Please post a close up video of someone scribing with turbo shears? and post URL here.
If roof caps were not scribed in in cane growing areas, they burnt to the ground, so they made it regulation to put the caps on by the building code and scribe them in as a good tradesman would.
There are a number of regulation methods to use without the need to scribe, but you're right, a good tradesman should fabricate everytime. Though the way the market is, specialized roofers replaced by cheap builders and carpenters who lack skills and knowhow.... There are those who instead of fabricating on site, search the city for a fitting and have never bent a flashing in their lives.
I'm sure there videos on the Malco website by the way. If I remember, I'll send one in... Cheers
where i can find this
tool
dwayne nobreger
www.powersnips.com/online-shop
Amazon
Thanks
Why isn't the scribing done on the ground instead of on the rooftop
You would have to use complex maths to work it out as it runs up and down the valleys of the corrugation. Much easier on roof just go by eye.
works good on that thin stuff you use. try that on my 26g R panels and you will see why no one uses those.
Duh, it clearly shows what the tool is being used for. Didn't see any mention of being able to cut your 26g R panels . . .
Q facil
hi friend.
i want to buy one tool like that.
if you have an adress .please send me.thanks
สั่งเลย
I seen the value of another job , roofing in QLD summer heat is shit
Preciso de uma tesoura dessa urgente
How po
Hi sir I am roofing worker I wanted to this job your country
Please help me
i Need one where i buy ?
powersnips.com/
$695.00 dewalt
$150 for this tool is fine and everybody makes money
qmax1969 go to website and everything is above 600
because to overpriced. . this company will be lost a lot..
will new companys can make this better a better price. ..
always is been like that with tools.
You get what you pay for.
Nice tool, poor video. You don't give us any information about the tool. What's the point of the video, to tease us and leave us hanging! REALLY?
over priced.
Tommy D high as giraffe pussy!
Way too overpriced
Absolutely useless