Toyota 4AGE 20V Silver Top Turbo | First steps - Conversion to Standalone ECU | Speeduino | Sound
Vložit
- čas přidán 6. 09. 2024
- #jdm #toyota #tuning #turbo #initiald #4age20v
In this video we are starting my budget Turbo Build on the 4AGE 20V silver top. As i have had the car for a year now and installed a speeduino standalone ECU. i inform you of all the things i did to get it running in the video.
Here you can find pinouts of the stock silvertop ecu (Automatic trans) and how i wired my speeduino
drive.google.c...
Music track: At Sunset by Filo Starquez & S.I.N.
Source: freetouse.com/...
Free Background Music for Videos
To show support for what i do + some benefits, check out my patreon: patreon.com/Th...
business inquiries: wtl@eschos.gr
Camera Gear:
Sony Alpha 7 (first Gen)
Meike 85mm F1.8 (Manual)
Sony Kit 24-70MM
Rode Smartlav with LC1
Rode Videomic
Hi. Just a hunch but take your TPS plastic cover off and there should be a cylidrical rod with a flat side (like a normal potentiometer one) going into the TPS which has a flat side then two ears which are supposed to tension it. They snap off leaving lots of play = you can't set the TPS as per the manual. Pack the flat with something suitable for zero play.
2nd common thing is adjusting the idle / throttle stop and not the TPS.
I would ignore the manual and do these steps:
Drive car so it is properly warmed up then turn it off, remove TPS connector and bridge the idle circuit on the connector.
Restart car (don't use any throttle while the car thinks it's idling), set the idle with the stop adjuster, turn car off.
Connect test light or multimeter, whatever, across the TPS idle pins and adjust so it is activated for as short as possible while coming on 100% of the time at zero throttle.
Sorry long comment :)
Nah the tps on mine is reading wierd values depending on how its mounted it only reads in liek 6.5 percent steps. I think im just gonna use a different one and be done with it lol
@@throttlebuddies6356 Yeah good luck. Can be fussy buggers
Awesome mate ,love 20v ,doing the same to my ke20 20v turbo on speeduino or ms3.
Nice, should be a lot of fun in a car that small
I am all for turbo on 20v motors ❤
4EFTE TIPS ???
tips for what? what do you need to know?
@@throttlebuddies6356 all i need to run 4efe DPFI to honda ecu or speeduino
@@throttlebuddies6356 toyota is DPFI system, someone already try to mdifie them to MPFI?
I dont know i would just run speeduino and be done with it. Takes no time at all and costs like 400 bucks in total with a wideband
bad wiring bro 6minutes
what do you mean exactly?
@@throttlebuddies6356 crank sensor and cam sensor are not clearly idnetified
Yes but crank is sensor one and cam sensor two obviously. Its because it doesnt say in either pinouts