Video nenà dostupné.
OmlouvĂĄme se.
F1-Style Paddle Shifters On a shifter Kart Install DIY
VloĆŸit
- Äas pĆidĂĄn 14. 02. 2019
- The KX250 shifter kart is slowly coming together and today we install simple yet effective F1 inspired paddle shifters. These can be easily made for under 20 dollars from parts at the local hardware store. I also mention some upcoming news towards the end so stay tuned!
đŽThanks for watching!!đŽ
đ SUBSCRIBE for more awesome content! đĄgoo.gl/APMj6G
Don't forget to smash that like button and hit that bell đ
Part 5 coming soon...
Part 4 âą Building A Kawasaki KX...
Part 3 âą Building a Kawasaki KX...
Part 2 âą Building A Kawasaki KX...
Part 1 âą Building A Kawasaki KX...
Thank you Go Power Sports!
You can find all the parts I used for this build here:
Axle:
www.gopowerspo...
3 hole axle bearings:
www.gopowerspo...
Rear wheels:
www.gopowerspo...
Front Wheels:
www.gopowerspo...
Front tires:
www.gopowerspo...
Rear tires:
www.gopowerspo...
steering hoop:
www.gopowerspo...
tie rods:
www.gopowerspo...
Spindles:
www.gopowerspo...
Frnt wheel hubs:
www.gopowerspo...
R wheel hubs:
www.gopowerspo...
đĄFollow me on Instagram @vasily1fab
/ vasily1fab
đĄ2nd channel: goo.gl/VefhDW
đĄDonation Link: goo.gl/ZxbUeG
đĄSupport me on PATREON: / vasilycustombuilds
đĄFor all serious inquires email me vasily1fab@gmail.com
-----------------------------------------------------------------
đ” Music used in video:
(support your artists)
âą1st song: WAWE - (NCN release)
âą2nd song: Kozah - Haha (ncs release)
âąOutro: Ncs Invisible
Family friendly
Thank you for your support! If there are any problems with the system on the test drive, I will not be afraid to redo it! But so far it is a great foundation for performance and will make it that much faster on the track and dragstrip! This build is becoming the staple of my channel so it is important I take my time and don't rush. Next part will be soon..
It's coming out great keep up the great work can't wait until the next video
Dude that kart is bad to the bone! I can't wait to see it banging through the gears!!
.
Amazing work Vasily!
@@JohnWheels thank you John! đ€đ
Itâs great cuz I give u finds of props but clutch??
I literally can not wait for this build to be done...but take your time and keep doing it right..it looks so sick!..with the motor running and the clutch it will shift a lot easier..film every minute! đ€đ
I bet your Dad walks around with the biggest smile on his proud face always. I would too. Your a top notch engineer.
đđ
Your leading on the 2 stroke cart build.everybody ask for them all the time and you are the only one to deliver.keep it up
I try thank you!!
Dang gonna be pretty sweet! Might have to race the kit car against this!
Heck yeah đ€â„ïž
You guys sound like you live close together lol
@@seth6878 I thought they were cousinsđ€·ââïž
@@seth6878 they are in the same town Vasily Builds, Goonzquad, and Vtuned.
I think they are related. He looks like simon on goonzquad' last video đ
honestly one of the best tutorials ive ever seenin my entire life
The Engine sounds while you were demonstrating shifter was awesome! Keep up the good work!
đđâ„ïžđ€
Love seeing your videos popping up in my feed, cant wait to see it drive
This video was very helpful. You're doing awesome on these builds! Keep up the good work, and remember you are capable of anything if you put your mind to it!
Badass fab work!! Kart is looking awesome!
Thank you I try
Great build itâs great to see the younger kids out there building stuff and using their imagination ...đđđ
this thing is not finished but already looks badass
Great job man, can't wait to see this rip :D
Friggen rights that is awesome. Can't wait to see it in action.
Looking good little buddy. That's going to be an awesome ride!!
wow das cool man great work
Nice work again buddy I like the way you dun the shifter.
Good video man! Got my 1984 moped running today after cleaning the carb!!
Turned on them notifications this build is getting cooler and cooler
That is one sick shifter cart!
Great job the shifter system looks great
Thank you lomesome
This is the video the Internet needed today. Excellent work, I'm looking forward to making one myself someday.
Turned out awesome brother. Great vid !!
Really loving itđđ
I already got the clutch material for the bike motor and torture tested them on a stock engine and they are holding up great.
Liked the vid before it started, keep it coming bud!! đđđ€,
BRAAAP
BRAAAAAAP
BRAAAAAAAAAAAAAAAAAAP
*pause*
_FiFtH GeAR_
đđđ€
Logan Hawkins T.V. đđđđ
Great fabrication work đ
Totally fantastically happy with the way you showed how to get the shifter set up , you got mad fab skills ! Great job !
Thank you
Thanks for the shifting idea
Great vid!!! I think the paddle shifters will work great with a little adjusting.
love the build!
beautiful work congratulations!
Can't wait for you to get it running. This is great!
That came out pretty nice đ
Love the vids as always!
Awesome build
Iâve seen a lot of people say they were gonna install paddle shifters but not actually seen anyone do it. Your the first and the design is really awesome. Great job
Haha thank you
Vasily Custom Builds no problem. Great content I subbed
That's is going to be a monster
This was great dude!!
Appreciate it!
Good job!! Looks good..keep on going ...Always turn left!!!đŹđ§đșđžđâïž
Very nice
Looks like you got your shift together ha ha. Really enjoyed the video, superb job
đđ
Your doing a great job.
I have driven both type of paddle shift some where the pedals are on the wheel and some where the paddles stay in place and the type where the paddles stay in place are 10 times better because you never have to look down or double guess yourself. If you put 2 tags for the cables on steering support bar and a of little bits tube to the centre of your shift mechanism to keep it in place you will have less wear and tear on your cables and your selector fingers in the gear box will last longer.
2 stroke can produce false neutral especially with worn selectors
Love your vids, was pointing out to one of my kids how cool it is that you hack a chunk of steel from a plate and turn it in to such nice pieces!.. Keep it up!
Haha thank you
well done and great idea
Been waiting for you to post
Like your custom paddle shifter build for your shift cart good idea
You are a legend man
This will fly, built one with a Kwak 125 engine and that was scary when it was at full throttle
Nice build
Thanks dude its so functional
This build is going to be mint đ
WOO HOO!
Right
very awesome, Keep up the good work bro, Can't wait till she rips up the track
really like it, for DIY paddle shifters, so far its one of the better ones ive seen built. On that note, something is definitely going to bounce up and hit that shifter bar off the engine and shift for you lol
Your videos are so epic just wanted to, say because you inspired me to Ride & Drive
Hey that is an awesome invention
You should invest in a plasma cuter it will make cutting that still a lot easier and make cleaner more precise Cuts than a cut off wheel on a grinder.
Definitely looking at one. My finances aren't that great but my dad said he can help me out
I HAVE 5- NEW IN THE BOX 50CC CHINA MOTORS WITH ELECTRIC START AND 4 SPEED AUTO CLUTCH. I WAS THINKING ABOUT PUTTING TOGETHER SOME KID SHIFT KARTS. THIS GIVES ME SOME GREAT IDEAS .THANKS
Dude this make of the gear is sick
thank you
Good job buddy!
Coming along nicely!
Hell yeah that looks good
Great video I was wondering a good way to make paddle shifters for my own cart
"bwehhh bwehhh bwehhhhh.. 5th gear" got me laughing đ€Ł
nice you are doing a hell of a good job i have seen you come a long way but in a very short time well done i am impressed good luck on the builds to come i have a feeling you will do alright peace
I. Am following the series for a time and I forget to sub but now I did keep up the good work man.
Very proud of you.
Sounded like a Suzuki there. Nice work! Nice welds.
Haha thank you
Youâre a genius! Awesome vid, glad I subbed
Helped me a lot
nice im going to copy this on my cart i'm in a wheelchair and have been thinking how to change gear on a paddle shifter i just got to figure how to use the clutch but nice job bro
It was a fun build
Bro I love the your job đđ..
Man those are some nice welds! Really ain't nothing that you can't do, I love that! â€đȘ
Loved the clip, awesome work, pretty badass, let see that sucker run, keep up the good work.
good looking build man, been watching for awhile. you inspired me to get back to working on my cart.
Appreciate it man good luck
Sick channel dude keep it up bro
Awsome job mate, keep the videos coming, đŹđ§ watcher
For what u have to work with. U do well
Thank you!!
Your should do a collaboration with cars and Cameras or red beard or rather be welding or quad ricers or break it build it repeat it would be a cool video just saying đ€·đżââïžđ€·đżââïžđ€·đżââïž
Congrats on 20k my man!!
Nice to see creativity.
I seen a problem that you may have.
The engine pulling on the center of the axle will pull the axle towards the motor sprocket.
Putting a bearing by the rear sprocket and support that to the engine mount will stop the axle flex.
Good luck
Its looking awsome
Thank you!
You should take a look at doing a pneumatic system for the shifter, itâs pretty simple just need a pump, tank, double acting piston and a solenoid valve.
That looks so good, looks like it was built by a team of engineers!đ
lolol
Pretty cool
My boy shifter kart sound effects on point đđ€Ł
Man I whish I found this sooner But for sure on my next build this will be part of it!!!!!! Simple easy ya right!
I think you should put a small engine on it.. to do some test runs.
Before you run the 250. đđđ
GET THIS THING RUNNING BROSKI!!!!
Soon đ€! My bank account has to approve haha
That's some great thinking. Your doing great.
man that's sick :)
You genius bro
With the song, I thought I was watching GoonZquad!
đđ we might link up soon !
Nice video!
Thanks for sharing
I always like to watch your videos. You`re always doing a nice job! :-)
Shift shaft? Nice one
Very helpful