Building the TX Tool Crib "Perfect Companion Knife"
Vložit
- čas přidán 9. 03. 2023
- I hope you enjoyed watching me make this knife! Ben from @txtoolcrib chose a great toolset here. It's definitely a cutting machine with all of these different kinds of blades. What do you think about the toolset? Is it something that you would carry?
Check out Ben's review of the knife here:
• Victorinox Companion :...
You can find more of my work on my website and information on how to order a custom Swiss Army Knife:
f2scustoms.com/
My Instagram:
/ fit2survive_
#customknives #sak #customsak #sakmodder
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/sky-toes/delicat...
License code: SABPFGCRHAICTY0M
uppbeat.io/t/the-lakes/bluebird
License code: MJY3AW8L2HET7NOV
uppbeat.io/t/sky-toes/another...
License code: B0YQVRNZKSX2AWGB - Jak na to + styl
Thank you so very much Cody! This knife is awesome!
You are most welcome! Glad to hear that. 👍🏻👍🏻
Now I'm watching both of your videos for this SAK.
@@MrPC1121 Awesome!
Yes I'm a year late . TX Tool crib is amazing. Amazing work .
Welcome to the channel. 😃👍🏻 Thank you!
You are a master of your craft. I know it is much more difficult that you made it appear. Thank you!
My pleasure, thank you too🙂
Awesome build! You make it look so easy!
Thank you! 😁
I’m such a huge fan recently of the Victorinox Swiss knives. Something about them brings me back to my childhood and now that I’m an adult I’m just buying as many as I can. I’ve always had one but have always had a bunch of knives. But just recently, idk what happened but I thought to myself “why don’t I have more of these”. Then I see you guys custom building them and getting custom scales making them one of a kind. I’m gonna do it. I’m gonna build one, one for me. That no one else has. Something unique that fits me and my needs. I always carry a Leatherman Wave Plus but something about these Victorinox that can’t be replaced.
Nice! They really can be nostalgic. I am certain you will enjoy modding your SAK into something one of a kind. 👍🏻👍🏻
All that's missing is the saw and this would be the perfect setup.
Would have been pretty easy to add. :D
I was thinking the same thing (except it is a pair of plyers instead of the saw).
I just love your work. You make it look so easy.
Thanks! 😎
thoroughly enjoyable video. Even though i can now convert some US measurements it is such a relief to hear metric being used.
Glad to hear that! I'll be honest... The imperial system is over complicated. Who needs 1/32" or 3/64"... 😝
You're so cool I'll tell all my friends who are Victorinox collectors in Korea I hope you have a nice day~~
Thanks a bunch! I really appreciate it.
Wonderful build. Thanks for all the effort to share.
Thanks! 👍🏻😁🔥
Awesome!
Love the Wenger scissors. Wish Victorinox would switch to the that design. Same with the magnifying glass on the Wenger.
Amazing skill! Beautiful knife!
Thank you! I really appreciate it.
Lovely! Very interesting build! Looking forward for next projects!
Thank you! More to come soon.
These are so fun to watch.
Awesome! Thanks.
Really Really nice video and work you put on there. All the details and showing everything. Much appreciate it
Glad you like it! Sometimes I think the editing work is more difficult than the modding. 😂 Probably because I enjoy modding knives and I do not enjoy video editing... 😝
You have just created the best-ever SAK. Love from India
Thanks! I appreciate it.
So awesome!!
Thank you!
I am in complete awe of what I just witnessed. First time watching your channel. This video has been on my ‘watch later’ list for some time, can’t remember when I added it or why I added it but this was not what expected. It completely blew me away, is this what you do on your channel make awesome custom built multitools?!
This is truly an art and a skill. I didn’t even know this was possible or even a thing and I’ve been into edc for some years now.
I very much enjoyed watching this video and again can’t believe that custom personal builds are possible like this.
Needless to say video liked and channel subscribed!
I am thrilled to hear that! Glad you enjoyed the video and the tool.
This is what I do on my channel and I do some EDC reviews.
Thanks for the sub!
Excellent build for a good fellow. Thank for Sharing!
Thank you! Glad that you enjoyed it.
Love the video my friend. This is almost my idea of the perfect sak. I would just switch out the pruning blade for a bottle/can opener and add a saw
Thanks! Glad to hear that. Yeah, I can see how that would add some nice functionality.
I have oodles of tools and similar skills to yours. I'll be honest this kind of project id never even thought of. I hope you make a fortune with this for anniversary gifts etc. Thanks for making this vid. Thumbs up
Nice! 👍🏻 Thank you!
Another outstanding job!
Thank you!
정말 바라던 갖고 싶은 이상적인 구성의 새로운 모델이네요... Good!!
Thank you! I definitely agree with you.
incredible build with a fantastic toolset!!!
Thank you! 👍🏻😎
brilliant again!
Thank you!
Preciosa amigo!! Great work!
Thank you! 👍🏻😎
Another amazing knife! love the videos!
Thank you! Glad to hear that.
Whoa, very cool.
Thank you sir! 👍🏻😎
Nice job. TxTC seems very happy.
Thanks! Yes, he does seem to be pleased.
Immediately I scanned the market for the 84mm parts too. But they are scarce and they are very expensive.
But the idea of 3 layers in 84mm instead of 2 layers in 91mm is great.
Yeah, the parts can be rather expensive.
Watching you do your magic is like listening to Pachebel Cannon in D minor. Cowabunga.!
😊 Thanks a ton!
That's a cool build
Thank you!
Very nice! It is so satisfying to see such a project start from a concept & develop through your usual impeccable work into a beautiful piece...I feel somewhat like the midwife's assistant in a very small way...Thanks!
Thanks! Yes, your comment is why I decided to check out his video and work on putting his Companion knife together. 👍🏻👍🏻
@@FittoSurvive You are most welcome! I am very glad to have been of assistance...
Beautiful work and a nice set of tools. There must be a form available somewhere to give the rivets a nice domed finish, certainly back in the day I'm sure they would have been fairly common, I remember using them when I went to tech college. To be fair though you've made a very nice job of peening them over with a hammer. Your customer should be really happy with that custom build.
Thank you! Yeah, there's definitely got to be an easier way to peen. I know that Victorinox has a machine, but I'd never be able to get my hands on one. 😅
Very awesome
Thank you!
That’s fantastic seems a little complicated 😊but worth it
Thank you! 😄👍🏻
Bout a second away from buying one just like this. Wish a lox came in black and could have orange liners..
Nice. :D The cadet alox does come in black scales and I could make orange G10 liners.
Wow good Modification! I bet costed some bucks but anyway it’s what you like !
Nice build.
Thanks!
Hi! A scissors from Wenger awesome👍
Yes, they really are.
This is the issue I was looking at, I like the pruning blade but getting it with the scissors and the hook is not on the factory menu, especially with the couple other tools I find I use regularly. Someone pointed me to this channel and I know it’s doable now. I’d honestly love this set up just with the can opener, bottle opener instead of the reamer and just different colour scales. I dream big
Cool, glad that you were directed my way.
Yes, it is completely doable. 👍🏻😁
Happy Saturday Maestro FtS, thanks for the new video. That is great tool set combo! If I was ever in the market for such a modification I would have chosen the 93mm size frame for a two layer Alox SAK with the blade paired with the combo tool & the regular scissors & for the 84mm frame a two layer Alox SAK with the blade paired with the combo tool & the scissors from the 74mm Ambassador over the 85mm Wenger stye scissors. ATB Steve
Hello Steve!
Glad to hear that.
Sounds like an interesting and slim toolset. Not sure if the 74mm scissors would fit on an 84mm, but I am interested in trying it out. 👍🏻😎
@@FittoSurvive Happy Monday FtS, My selecting the 74mm scissors is just theoretical & it might not be practical if it won't work with the backspring on an 84mm sized frame, in which case a modified 85mm Wenger style scissors will be the way to go. Basically I am thinking along the lines of an Alox version of the 91mm Compact. Have a great day, ATB Steve.
Nice work :)
Thank you! 👍🏻😎
Very f'ing impressive. Obviously not your first rodeo. If Ben doesn't like it, which seems impossible, I call first dibs.
🤣👍🏻 Thanks. Ben seemed to be pretty pleased with it.
I hate the stupid bottle/can openers. I wish more were like this knife. Good job
Thank you.
That's the most perfect victorinox mod I've ever seen.
I am thrilled to hear that!
Great stuff, always enjoy Ben and your vids, off to check his one now.
Thanks a bunch! I really appreciate it.
Nice
Thanks
This is awesome thanks! Can I ask when you reshape parts, to what level do you polish them?
Thanks. I usually polish them to 1200 grit.
Excelente
Gracias!
This is one of the best videos I’ve seen for quite awhile. Where can I order one of these ??
Thank you! I appreciate it. Check out my website for information on how to order one. www.f2scustoms.com
Really like this build! How do you make the ends on the brass rods ( pre assembly)?
Thanks. I have to peen the brass to get that mushroom shape on the ends.
I am impressed by the ease with which you drill the bolts, you use a special bit or a preferred brand, which do you recommend using. Thank you
I use a cobalt drill bits. Usually I have to order them from overseas (via Ebay) because it is difficult to find small metric sizes without ordering an entire set.
The drill bit needed for the 84mm frame is the 2.2mm. And that is not a common size.
That’s funny, I recently went back to carrying my first cadet (and first SAK at that)… and I missed it but it’s missing scissors, so I bought a couple more and took them apart, got Wigner style scissors as well as it’s an 84mm like you said. Basically this has been on my mind as well, got a “beater” cadet now that I take apart and add or mod parts for, I’ll post it in one of the groups you’re in sometime later. Awesome work brother!
Niсe! The Cadet X is an amazing toolset! Best of luck on your project. Look forward to seeing it.
@@FittoSurvive out of curiosity where do you get the little round spacers from? I’d love to not break open a few more SAKs than I have to for those… if possible.
@@antonsimanov The washers that I used were left over from making Dragonox Cadets. The Dragonfly does not need the washer like the original blade does.
I imagine that a similar size/thickness could be ordered though.
@@FittoSurvive I’ll have a look around, do you have a favorite place you like to look for parts or just anywhere? Now to size the washers, hopefully they’re not a special size but that’d be too east 😂
@@antonsimanov Hmmm... The SAKs I source from all over depending on where I can get them cheaper: Amazon, swissknifeshop, SMKW, etc.
As for parts, if you mean like the washers, I'd check on www.knifekits.com
Great build, and very informative video. Thank you!
One question: was there a reason why you put the key ring spacer closer to the scales? If you need two spacers there next to each other, I would imagine that the key ring would be better positioned a bit more towards the middle of the knife. Or would that be too close to the pruner blade?
Thanks a bunch! Glad to hear that.
Yes, I try to keep the key ring spacer as far away from the tool next to it. If you get it too close, then there is a good chance that it could get in the way.
I always wanted alox bantam X, it doenst feel right to put wanger scissors there, but i just realised... is it possieble to make bantom x, from pionier x, put combi tool there instead of awl and take entire opener layer out? (or combi tool is too thin for this build?)
secound idea is to just swap awl for electrician blade on a pioneer x on the knife layer, that seems more usefull in urban office setting
Should be able to replace the awl with the combi tool. It would need some extra spacers. It would basically be a 93mm Bantam X.
Another fantastic build! Amazing👏 Quick question.. is the knife blade on the alox bantam(84mm) identical to the standard 84mm main blade? Or is it also thicker like in the 91mm standard vs alox version?
The 84mm alox blade is the same size as the standard 84mm.
You are the master. I am not worthy. I am wondering are the electricians blade and pruner blade the same throughly the different sizes?
Thanks. 😅 The electrians are the same size and the pivot holes are the same size. But on some tools (like the XLT) The Electrician and Pruner blades have been bent to be able to be placed opposite each other.
Need to watch further but what I tought atm the army 7 has the pruner blade wich fits the electrician too
👍🏻👍🏻
@@FittoSurvive Wouldn't that be the Electrician Plus? 93mm?.... Victorinox has had some really nice models that they discontinued... My favorite would be a 93mm 2 layer Lumberjack with an added electrician sheep foot... Main Blade Saw blade Combo tool and a Sheep's foot...
Vic should just make these modular with torx or something. I just want the compact with a saw instead of blade and awl instead of parcel hook
Yes, that would make it very convenient! I wish they would do that too.
Three of the tools (the two smaller blades and the shim) had holes larger then the 2.5mm pins. How well does that work in practice?
I typically do not modify the 3mm pivot bores, there's not any issues in action and closing. Trying to peen them in and re-drilling them out to 2.2mm is unnecessary.
Great job! How great would it be if Victorinox started making these and called it the Victorinox Crib
Thank you! That would be really cool!
Congratulations very nice work, it's beautiful 😍. What diameter do you use for the axes? Did you drill the new tools with a larger diameter? Thank you. I just subscribed to your channel 😃
Thank you . I used 2.2mm brass pins . I didn't drill out the tools. Here's a link to the brass pins. amzn.to/3IwHv1K
Can you share a link to where you got the washers?
Actually the washers that I used were originally from the Victorinox Cadet and the others were some 0.1 mm brass washers that I had lying around.
Wenger scissors are the best anyway. The tiny teeth make them fantastic for moustache & fishing line duty 😆
Love the electrician blade.
It's so soothing watching you work, you always choose relaxing music too 👍
I like the toothed scissors as well. They are super sharp.
Awesome! Glad to hear that you enjoy watching the build process and my choice for the background music. I try to keep it low key.
The 91mm will allow the spring type scissors won't they?
Thanks
Darrell
Yes, the 91mm SAK uses the scissors with the usual spring.
Great video.
May I Ash how much you u charge for someone to buy the end knife in this video???
Thank you! A knife like this will cost around $420.
I noticed the scissors spring sticks out a tiny bit. Is this because it's from a wenger?
Yes, this is due to the tension from the scissors and lack of tension from the spacers opposite the scissors. I am working on have a special spring made, replicating the original/discontinued 84mm scissor spring.
If anyone can master the art of spring conversion, it's you
@@ThorenTravels I appreciate the confidence.
IMO The real problem about scissors is to mount Victorinox larger scissors (those mounted on FARMER X? or on Swisstool X? Actually the best performing scissors around) on a RUIKE LD42-B in which scissors are a little weak for an otherwise very sturdy and effective Knife. Another thing to develop further about victorinox is the possibility to avoid fix rivets in favor of dis-mountable screws so the knife can be cleaned in depth, can be reconfigured over time...
I've never used the Ruike before. I might look into that some day. Assembling the SAK with torx screws will really be an awesome improvement, I do have plan to make a special build like that in the future.
Hi, do you make knives for customers, or just for youtube videos? how much does one cost, roughly? (3 layers alox pioneer with custom tools)
Hi, I do except custom orders. Check out my website for inro www.f2scustoms.com A 93mm SAK cost around 300$ and up.
Cody .
Ben's companion knife is great.
Could I possibly have you build me one in a 91mm frame?
Hey, thanks. Yes, I can make one similar to it in the 91mm frame.
@@FittoSurvive I have an electrician Alox would that work as the base frame?
Very well done! How much do you charge for a knife like that?
It cost around 450$
Thank you.
i personally think the swiss army knives are boring and strictly utilitarian, so i think what your doing is awesome, giving a new spin on a mundane tool and breathing new life for such a reliable and iconic knife
I agree with you for sure. Victorinox needs to get out of the rut and start being more creative. Thanks!
っyっt
っt
If I were to make my perfect do it all tool, I would not sacrifice any of the screw drivers. I would make a 5 layer knife with awl, main blade, wood saw, file, pruner blade, electrician blade, can opener, cap lifter.
Sounds like a great toolset! 👍🏻
agree, perfect companion, can i have one?
👍🏻😁 Check out my website for information on how to order one. www.f2scustoms.com
Is it possible to add the locking blade from one of the evolution series and use the dragonfly 2 blade, or run 2 locks for a scalpel and dragonfly 2 blade. If you could have 2 locking blades scissors, parcel hook and the bit driver I think it would make a hell of an bird and trout knife or a companion to a solid fixed blade for hunting. Maybe even throw the pliers on😮. If it’s at all possible.
I am still working on getting a locking blade to work. But havent had any successful experiments yet. The Evo locking blade has to use the Evo tool spring which is not compatible with the 84mm. Maybe the liner lock from a 111mm SAK will work though.
I'll post a video once I get it worked out.
@@FittoSurvive with the 111mm I would assume you would have a lot more blades to choose from as a donor as well, might be perfect that way!
@@poonbandit9924 I meant using the liner lock from a 111mm and modifying it to fit on an 84mm.
@@FittoSurvive that would be so cool, I’d have to buy one immediately!
Sounds awesome
Knives jewelery
👍🏻😁
I would call it propagation blade for making air layers not a pruner.
I can see what you mean. But Victorinox chose the name "pruner". The shape of the blade is called a hawkbill.
Replace the scissors for a sawblade and its perfect. Never really was a fan of tiny scissors
That could be arranged. 😅👍🏻
@@FittoSurvive I honestly was thinking of asking you about a build for myself. I was thinking green scales like micarta, denim or like Carhartt material, something grippy as long as I can get plus tool scales. Tweezer, Ferro rod in place of pick. A spyderco main blade, smaller secondary spyderco that's serrated karambit both 1 hand opening, and the main victorianox blade but serrated. Can opener, saw and the little pliers for grabbing hot stuff. An awl, corkscrew and philips at the back (the only tools I can think of for the back). Green g10 liners in place of aluminum if possible, if not, I really like brass. I really like the 111mm and 130mm sizes, the bigger the better. Lemme know what that would cost, ballpark. Canadian 👌🏽
@@misfitledoux1312 Can you send me an email. That would be much easier for me. f2scustoms@gmail.com
Would you be interested in selling kits so I could try and build my own? It looks so therapeutic and fun, I’d love too try and make my old sak mechanic new again, and I’d love too make a rambler alox
I have thought about putting together kits for people to "build their own", but I haven't started that just yet.
@@FittoSurvive I have a Swiss army mechanic, it’s something discontinued and I’d love too freshen it up and give it a spyderco, also I’d love too make my own mechanic special, I love the pliers
@@davidbreitwieser3591 Nice. I'd need to get everything worked out. Maybe by Christmas time I'll be able to sell a limited amount of project kits.
Noice turnout
Thanks!
Пора на Клинок выстовляться!
Очень хотел в этом году съездить на Blade, но похоже не выйдет. Если только не устрою какой нибудь Gofundme. 😅
Do you do custom knives for sale? How would I contact you?
I do accept custom orders. Check out my website for information on how to order one. www.f2scustoms.com
The problem with you people is you cannot go beyond / or are limited to the world of branded products....be it SAK or Leatherman..! When you can develop a bit of DIY mentality and create such tools and shapes on your own with simple tools ...!
I'd love to be able to make my own multitool. But why reinvent the wheel when I can just make improvements to an existing knife? If you buy a new car and put bigger tires on it, would someone tell you "why don't you just build your own car"? Make sense?
Not being confrontational, I just don't see the problem. 😄
Hi Cody
I am currently watching " how I made this custom SAK for Nutsac
Interested
How to contact you ? Kind regards
Hello! There are links to my social media and email on my website. www.f2scustoms.com I am flooded with messages right now, but I will get back to you. 👍🏻
Maybe need saw 🪚 in tool
Yeah, the saw would have been nice to add as well.