The mini may have been worse off but you can get parts extremely easily, pretty much every panel and even whole shells are still manufactured Sad to hear it had a bump, looked awesome at the show!
Yeah, from the impact I was expecting waaaaay worse. That crash bar did me proud! Just paint and time fortunately, just time I could’ve spent doing something else.
This hurts to see. Glad it was minor and you got compensated. All my cars have been getting wrecked lately. Three of them so far. I haven't been compensated for any of them either because laws here don't really work. And I'm not a body guy, so I've had to replace two of them and I'm living with the third. I'm actually thinking about cutting out the damage on the one I'm living with and covering it with a widebody since I watched your Brat project. It's way outside my comfort zone, but I guess that's how I tend to learn things. Anyway, condolences on the crash, and thanks for the inspiration.
Hey man, Sorry to hear about your run of bad luck and you’ve not been compensated for any damages. Learning by doing has always been the best method for me. If you fancy having a crack at it you should! I honestly hope things turn around for you dude, and I’m glad the channel can be an escape/inspiration for you!
Hey, thanks for the response! I never thought of this sort of thing as something I could do, or learn how to do, on my own before. You make it look easier than I imagined it. I'm sure it isn't really, but at least it seems managable now in my mind. Thanks for that.
Nooo clicked straight away hoping it wasn't so. Was one them cars u hope nothing ever needs to be found as I'm sure like glass etc is impossible to find
Luckily it’s just metal and plastic! I was dreading having to look for anything to replace. Especially in the UK where they are extremely thin on the ground.
@@BuildCreate Totally bro! Well one thing is for sure, you’ll get it fixed up and looking great again soon! Btw I have a ‘92 SVX on Gecko coil overs and I just bought some 18’s for it. I’m going to post some videos soon if my coil over install. 💪😎
Mini W4NK3R 🤬😁 LOL joking but he obviously wasn't doing what he should have been.. I suppose it could have been a lot worse. I'd straighten crash bar and reinforce it.. I saw a stock SVX recently at the Stormont Classic Car Show in Belfast
He wasn’t, but obviously admitted fully that he was to blame….I was just sitting in traffic 🤷🏻♂️ I’ll try and straighten it at some point soon, or like you said reinforce it a little.
Handled it like the champ you are Chris. Not cool, but on a side note you are getting some more skills.... anyway keep up the good work and unfortunately life does happen.
Your going to be able to just enjoy this car soon, without constant re repairs!! I mean the law of statistical luck should give you the next like 5 years without a panel crack that needs full on repair and respray... Eeks
You definitely handled it better than I would have
If it was worse I think I would’ve lost it. Fortunately nothing broke, just dented metal and split plastic.
Glad we were able to be with you through it, man! Total bummer way to end such an amazing weekend, but so happy it wasn’t any worse.
Forever grateful for you guys! I don’t think I would’ve handled it nearly as well.
The mini may have been worse off but you can get parts extremely easily, pretty much every panel and even whole shells are still manufactured
Sad to hear it had a bump, looked awesome at the show!
Exactly dude! Mine on the other hand is the opposite, but at least nothing was broken and needed replacing.
Thanks for checking out the car dude!
That sucks brother. Good deal that it is pretty minor, and good luck with the bumper!
Yeah, from the impact I was expecting waaaaay worse. That crash bar did me proud!
Just paint and time fortunately, just time I could’ve spent doing something else.
Bad luck Chris; thank god you have the skill and talent to take this on yourself!
Thanks man, I’ll get it back to how it was or better in no time!
This hurts to see. Glad it was minor and you got compensated.
All my cars have been getting wrecked lately. Three of them so far. I haven't been compensated for any of them either because laws here don't really work. And I'm not a body guy, so I've had to replace two of them and I'm living with the third.
I'm actually thinking about cutting out the damage on the one I'm living with and covering it with a widebody since I watched your Brat project. It's way outside my comfort zone, but I guess that's how I tend to learn things.
Anyway, condolences on the crash, and thanks for the inspiration.
Hey man,
Sorry to hear about your run of bad luck and you’ve not been compensated for any damages.
Learning by doing has always been the best method for me. If you fancy having a crack at it you should!
I honestly hope things turn around for you dude, and I’m glad the channel can be an escape/inspiration for you!
Hey, thanks for the response! I never thought of this sort of thing as something I could do, or learn how to do, on my own before.
You make it look easier than I imagined it. I'm sure it isn't really, but at least it seems managable now in my mind. Thanks for that.
Sorry to see this,Chris. At least the guilty party is owning up to it. Thank God too for Subaru engineering! It will be back to normal in no time.
Yeah dude. It was 100% his fault, I was just sitting waiting for my turn to exit the show.
I really am thankful for that crash bar!
Nice stainless steel exhaust at the rear will finish it of nicely car is looking sweet
Such a shame. I watch Ludwick garage and seen your car out in the open looking so nice. Hope you get it sorted out very soon.
I appreciate that dude! I’ll have it good as new really soon!
Duuude, that suuucks. Soo much work...
I know dude, just seeing it like that bums be out.
I’m the type of person that wants to work non stop until it’s done.
Wooh wooh wooh!!! Why am I now just seeing your videos suggested! I have so many to catch up on! I’ll be back in a few hours when I’ve caught up😅
I think the algorithm hates me 😂
Nice to see a vid mate not ideal circumstances
I know man! Trying to be productive for you guys and put out more content.
My worst nightmare with my SVX. And right now I'm dailying it. o_O
Same dude. Came out of nowhere in a queue waiting to leave the show 🥴
i want to see it swapped to manual & drifted ( after making molds ofc of the flares ) be the SVX guy that kills it
Manual swap is definitely happening dude!
Nooo clicked straight away hoping it wasn't so. Was one them cars u hope nothing ever needs to be found as I'm sure like glass etc is impossible to find
Luckily it’s just metal and plastic! I was dreading having to look for anything to replace. Especially in the UK where they are extremely thin on the ground.
Glad the damage wasnt worse, ypur svx has me looking for one stateside, kinda curious what it would take to manual swap one
Same dude!
Manual swaps are super common and the SVXnation has all the info you need on it and everyone on the FB group is super helpful!
Oh man!! 😢
Yeah dude, such a bummer after all the work.
@@BuildCreate Totally bro! Well one thing is for sure, you’ll get it fixed up and looking great again soon! Btw I have a ‘92 SVX on Gecko coil overs and I just bought some 18’s for it. I’m going to post some videos soon if my coil over install. 💪😎
Bring on the merch dude
I’ll get on it dude!
Mini W4NK3R 🤬😁
LOL joking but he obviously wasn't doing what he should have been..
I suppose it could have been a lot worse. I'd straighten crash bar and reinforce it..
I saw a stock SVX recently at the Stormont Classic Car Show in Belfast
He wasn’t, but obviously admitted fully that he was to blame….I was just sitting in traffic 🤷🏻♂️
I’ll try and straighten it at some point soon, or like you said reinforce it a little.
Handled it like the champ you are Chris. Not cool, but on a side note you are getting some more skills.... anyway keep up the good work and unfortunately life does happen.
Definitely a forced opportunity to learn more 😂.
It does indeed and I’m glad that it wasn’t worse!
Aw man, that sucks, but it couldve been a lot worse and I'm itll be even better than before by the time you're done 👍🍻
Most definitely could’ve been worse dude. I’m very lucky considering the impact.
Your going to be able to just enjoy this car soon, without constant re repairs!! I mean the law of statistical luck should give you the next like 5 years without a panel crack that needs full on repair and respray... Eeks
I think I’m owed that 😂. I was really looking forward to relaxing for a bit and filming it not in the garage for once.
really sucks dude, but as you say other than time, it really could have been a lot worse. feel for ya.
I definitely put it down to the insane crash bar saving it from real damage.
Just gutting having just finished it 🫠
Que dice gandalf al final del video?
Subscribe you fools! 😂