Best Ways to Section Panels (TESTED)
Vložit
- čas přidán 26. 08. 2024
- Check out my shop for all toolslinktr.ee/AUTO...
Welcome to my tutorial! In this videos, I'll show you the BEST and my favorite way to section a body panel. I'll take you through all the steps from removing, prepping, welding, and finishing.
As an Amazon Associate, I earn a small commission from qualifying purchases. Some of the links are affiliate links and if you decide to buy the tools through them I earn a tiny commission. It costs you nothing but helps me big time.
7 Piece Dura Block Sanding Kit:amzn.to/48xvNj3
Steck Quarter Panel Puller 20022:amzn.to/48NjvCJ
Astro Pneumatic Tool 930 Mini Reciprocating Air Sawamzn.to/41SYQeq
Sunex SX8200 Surface Blaster Kit:amzn.to/48J7Swz
The MAXI - 220v:www.dentfix.co...
Evercoat Rage OPTEX Color Changing Filler:amzn.to/3OhiHhR
Evercoat 425 Metal Glaze Ultra 30oz:amzn.to/492KXg7
Canadian Tool and Supply 7-Inch Air Angle:amzn.to/3tJ2zOQ
Wurth 1/4" ANGLED 90 DEGREE DIE GRINDER:shop.wurth.ca/...
Mirka MR-6 Finishing Sander:amzn.to/3vrjje5
Body Line Tool:amzn.to/3tNoZP1
Martin 1024 9" Blade Surfacing Spoon:amzn.to/3SbJ8I5
Uni spotter 5500:www.toolsource...
3M Belt Sander:amzn.to/48qO4hI
Milwaukee M12 FUEL 3/8 Stubby Impact:amzn.to/3H9va2V
#autobodyrepair #automotive #car #welding #autobodytech
What a great job! I am not a body guy but i have wrecked my stuff before! Lol
A crazy amount of work for such a little panel. The entire car is totally gutted.
Recently discovered your chanel. Appreciate everything you do especially for us apprentices. 🙏🏻
Thanks! How far along into your apprenticeship are you?
This is excellent. Love the commentary!
Glad you liked it!
I have watched many CZcams videos and you should really become an instructor on autobody work! Best by far that I have seen!
Good work
Great job!
Thanks!
Very professional
Great welds!😎👍 all your work is flawless
🔥💯🔥
Great information thanks keep them coming 👍
You put more spot welds and in between from the original spot weld, when putting in new panel?
No, The same amount of spot welds. I try to put them back as close to where the original was as possible
do you coat the bare metal with weld thru primer... seems to me there should be something to protect the metal you exposed???
yes, weld through primer is meant for the flanges where the 2 panels mate
hy sir, whats the name of that instrument your using to cut the oanels
Hey its the Astro Pneumatic Tool 930 Mini Reciprocating Air Saw
you can find it on amazon here amzn.to/41SYQeq
I have a list of tools that I use in the description
Well that definitely could've been fixed
Yea, for sure. Looking back, I probably should have
Do you remove the ECM ( disconnect electronics) before you weld the car
It's best practice, yes, although I do forget from time to time.(disconnect battery)
Uh, just the battery? Or, both the ECM and the battery?
@@jerryhuff86 Just the battery
Thanks
I don’t wanna be that guy but welding a few plates to that roof lip and a slide hammer might of got ya 15 hours to fix that. But either way your sectioning technique is top notch.
Agreed! Sometimes, I don't make the best calls
I'm with ya i would of repaired it
You don’t put the door to adjust it in place with the panel?
It's always good practice. For this instance, I did not because it was sush a small section. I was confident that it would fit
Love your channel! I was wondering the make and model of the mini belt sander and resipricating autobody saw you use? Thank you!
It's a 3M Belt Sander and Astro Pneumatic reciprocating saw. Check out the links in the description. I should have most of the tools there!