XS650 Brat Build Ep 28, Daytona Velona Gauge Wiring & Setup
Vložit
- čas přidán 3. 10. 2020
- In this video I go through the wiring and setup for a Daytona Velona 80mm electronic Tach/Speedo.
Products used in this video:
*Daytona Velona 80mm Tach/Speedo - rougemotorcycles.com.au
*Daytona speed pulse converter - rougemotorcycles.com.au - Auta a dopravní prostředky
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
this video just help us iin our build process, thank you from Bali
No worries. Glad it was helpful.
Thank god for people like you who take the time to make these kind of video's
Thanks mate. Glad it was helpful.
Often thought about changing my original gauge set to one single fancy unit. It is pretty cool and tidy guage...holy Margot
Nice gauge, super clean.
Very helpful video, thank you very much for posting!
@Brodie loved the build series. Cant wait for me people to see. I get the feeling you’re going to connect with alot ppl.
Hey.
The RPM pulse .. do you attach it to the negative or positive side of the coil? :)
And thanks for a great video!
MVP mate!
thanks for doing this,, it really helps!
No worries mate. Glad to help.
Best video on CZcams on setting up Daytona gauges.
Quick question, would you happen to know the option I should choose for the RPM setup for my 1982 honda CB750f.
Thanks in advance
You the best!!!!
Hi there! I bought exactly the same gauge for my XS650. Does your Hi beam indicator light also light up 50% when the low beam is on?
Hey man, thank you for the video! I´m just struggling with setting the total amount of kilometres... May I just ask you how to set them up? It is a used bike and I need to set the actual amount of kilometres because now it is showing 0 km...
Hey, those plastic-covered bullet connectors at 2:34 (clear and solid). I'd like to get some of those. I have some pretty cheap connectors that aren't waterproof.
Would you be able to share a link for them?
is the rpm detector (wrap around coil 5 times) accurate?
Bro. I subscribed to your channel 3 times now on 3 different videos and for some reason its not taking. Hope this isn't a CZcams glitch for more people then myself. Bike turned out great. when you're done testing it out could you post some info on the carb jet sizing. I'm using the same chew toys on my carbs and having some issues in mid range. Thanks oi oi oi !
Excelent video. Does the Daytona Velona handle double coil ignition for RPM?
Thanks mate. My bike runs 2 coils. It has settings for if the bike fires every revolution (2 stroke or redundant spark 4 stroke) or if the bike fires every second revolution (traditional 4 stroke). It even has a setting for some weird harley multi spark system that I never bothered learning about.
Hey man this video help us so much , we in progress build street tracker with that speedometer send bybour customer from Netherland . Questions, so we need that M12 Thread Female #87429 speed pulse converter to replace convetional speedometer cable right ?
And that parts its sale saperately with the velons speedo yes ?
Hey mate. There are 2 options for the speed signal. #1 magnet and pick up (best for when using non standard wheels) #12 speed pulse converter (recommended if you have the original speedo drive) and yes they are sold separately.
I have one and I have trouble turn it on, do you conect only red and black to switch on only? Cheers thanks
@@2wheelworkshopyes, that's what I think, but nothing it's all off no lights no nothing, then funny, I linked the other wires like the neutral to earth and green N comes on... That pilot lights works, I guess it's broken from factory, I will claim other one or refund, thank you for your time other question regarding it, só no need for a memorie wire like the auto-radio to keep set up?
when setting up for MPH, do you follow the included instructions for KPH then switch to MPH or just use the math for inch per mile?
I couldn't say mate. It's been a while and I can't find the instruction booklet. Sorry
I am looking to switch mine since the bike is imported, so I would like to swap to one that shows in km/h. But is it possible to add my current miles to it since its digital? or do I need to start from 0? And is it possible to and the kink stand waring for the warning light or is it just for oil warnings?
It will be in the instructions you get with the unit whether or not you can enter the original km/miles. I think you can but only when brand new (don't quote me though). You are able to wire any switch you want to the warning light.
Tried all three speed calibrations. After calibrations at 70km/h speedomeeter speed indicator goes to 0. Any ideas or tips? Got 47 pulses per 10 revolutions on my BMW K1100LT 1997.
I wish I could help mate but it sounds like the unit might be faulty. If it were me I would repeat the process one more time to make sure and the contact the manufacturer.
Hello, can u help me with my installation. i m stuck at the magnet sensor part. i bought the velona gauge for my SR400 which also comes with that small magnet sensor, however i m not sure how does it pick up pulse or how does it "read" the speed of my bike, should i install it on the front fork n let it pick up the disc rotor spinning motion or do i need some other part that generate the pulse signal? thank you.
@@2wheelworkshop i dont seems to have that magnet, the package only comes with the sensor, do i have to buy it separately or it suppose to come together or it actually not suitable for bike that old model?
@@2wheelworkshop so is it has to be a magnet but not a bolt install on the rotor disc?
@@2wheelworkshop great, i will look into it, thank you
@@2wheelworkshop any magnet bolt? but how does it measure the speed? is there any setting i need to set in the gauge?
@@2wheelworkshop understand, thank you very much
are you the guy from the true classic t-shirts commercial clips??
Nah mate. Never seen them
@@2wheelworkshop ok but please check this out, you look identical
czcams.com/video/Bl_0UDTR2FY/video.html
So, of course I went and looked up these ads and now CZcams and FB have inundated me with true classic ads.🤣
Bought the same gauge for my XS650. Check out a bike built by Modogadgets of Netherlands (www.pipeburn.com/yamaha-xs650-motogadgets/ ) which features these clocks and welter of other tasteful mods. Trying to build a near copy for my wife.
I just uploaded my sx650 video! It is still work in progress! I am going to change the cheap speedometer i have on from amazon to a nice one like your! Also, got little oil leak by the kickstand that I am trying to figure out.
czcams.com/video/ctVBV-n11vo/video.html