How To Replace C5/C6 Ball Joints
Vložit
- čas přidán 20. 08. 2024
- My Corvette Life: Episode 292 - How To Replace C5 Ball Joints
TORQUE SPECS:
Lower control arm (2) 21mm @ 125ft-lbs
Lower control arm ball joint (1) 22mm @ 15ft-lbs, 210 degrees, 52ft-lbs
Upper ball joint (1) 19mm @ 15ft-lbs, 250 degrees, 41ft-lbs
Upper control arm (4) 18mm @ 48ft-lbs
Front sway bar end links (2) 18mm & 8mm @ 53ft-lbs
Tie rod end stud nut (1) 18mm @15ft-lbs, 160 degrees, 33ft-lbs
Brake line mount (1) 10mm @ hand tight
***Use heavy duty lithium grease or marine grease for all greaseable joints.
T-SHIRTS & MERCH AVAILABLE!
teespring.com/...
Contact Me Via Email:
mycorvettelife.yt@gmail.com
Here are my socials:
Facebook: / mycorvettelife
Instagram: / my_corvette_life
Car tuned by Arizona Elite Motorsports
422 RWHP, 381 FT-LBS (91 Octane, Mustang Dyno)
1998 C5 Corvette Coupe - Modifications List
Corbeau A4 Seats
Thunder Racing T-Rex Cam TR224: 224/224 563/563 114LSA
Kooks 1-3/4" x 3" Long Tube Headers
Kooks Catted 3" X-Pipe
Corsa Indy Pace Car (Corsa Sport) axle-back exhaust
Casting 799 - LS6/LS2 Cylinder Heads
BTR .660" Lift Dual Valve Springs
7.375" Pushrods
LS6 Intake Manifold
Vararam Lower Ram Air Intake
Vararam Power Duct (Air Bridge)
Mike Norris Motorsports - Billet PCV Oil Catch Can
DeWitts Radiator
DeWitts SPAL Fan Upgrade
C6 Z06 Shocks
C6 Z51 Sway Bars
C6 Z06 Brakes
Stainless Steel Brake Lines
Xineering Downshift Blip Module
C5 Z06 Mesh Intake Grills
C6 Z06 Shifter
C5 Stainless Steel Dash Trim Kit by American Car Craft
RaceGrip Suede Steering Wheel Covers
Corvette Envy LED Halo Tail Lights
Corvette Envy ACA Projector Headlight Housings
Clear DRL Housings
Vette LEDs DRL Switchbacks (Use code "MCL5 for 5% off)
Vette LEDs Reverse Lights (Use code "MCL5 for 5% off)
Vette LEDs Cabin Lights (Use code "MCL5 for 5% off)
C7 Carbon Vented Front Splitter - Gloss Black
C7 Carbon ZR1 Style Side Skirts - Gloss Black
Corvette Creationz TPE 2" Flared Rear Quarter panels
C6 Z06 Rear Splash Guards
Forgestar F14 Wheels
(18x9.5 +49 Concave front, 19x12 +23 Super Deep Concave rear)
Tires: Bridgestone (Front) 275/35/18, (Rear) 325/30/19
Very well-done video and great explanations! I need to replace my C6 ball joints. This video gives me the know-how and confidence I can do this myself.
Incredible video man! I just bought a set of Bilstein shocks, new wheel bearings, lowering bolts, stainless steel brake lines and a pair of new sway bar end links. Since I have to pretty much remove everything in order to get to the wheel bearings got me thinking to replace the ball joints and this video made it look like a breeze. Well done and thank you for explaining everything.
I just replaced the lower ball joints on my 03 Z last night. I was raising the ride height a smidge via my coil overs. Didn't remove the control arms from the car. Used a breaker bar to remove & install. Went like buttah! I just needed the wife's assistance (only cost me a take out pizza) on install to hold the press and receiver together over the control arm while I supported, lined up and snugged the tool.
Probably the best, and heaviest tool I got from HF. Thanks for your videos.
im doing this next week. I was thinking it would be easier to leave the lower control arms on the car. Easier to loosen everything up too before you remove the top arm to swing it down.
You are a better man than me. Job like that -- going to my local mechanic. Don't have that guts to try that. Great video as usual.
Good call on the HF ball joint separator. Some trimming may be needed to the fork to fit well enough but it was a good time saver for cheap $15 and no damage to any control arms.
One more of the good videos.Gracias Chris God Bless you and your Family.
man, i wish i had a neighbor like you haha
I realize sometimes in the moment I call “bolts” nuts and “nuts” bolts. 🤣. My terminology isn’t perfect but I hope you guys get the idea.
Now your last cleaning video makes more sense. I like a clean suspension as much an anyone but taking thing out to clean is a bit much ( great content btw). Im the vett onwer you mentioned the future owner
Thanks Chris going in the library of best vids. By the way Chris Your channel has step up 100% , vids are like the class room awesome job 2 thumbs up 👍😊
Dude, first of all, great catch on that upper arm. Thanks for this. I'm getting ready to tackle this. Going to clean the arms and spindle up. And while I got it blown apart going to replace the wheel hubs. Perfect timing for this. Glad to see you wrenching again.
I've got videos coming on the wheel hubs and control arm bushings soon.
@@mycorvettelifedo you have a time frame in mind? I'd really like to get all the information before I start. Once I have Jasmine up in the air, I want a complete bushing,ball joint and wheel hub replacement at one time. Love driving my C5 and want to minimize the down time. Great job Chris. You and a couple others offer up so much info that save guys like me time and valuable money. C5 parts not cheap to replace if you break something not made any more. Again thanks alot. God bless.
Hopefully in the next week or two at the most.
@@mycorvettelife cool. I'll be keeping a look out for it. In the mean time I'll be gathering up parts. Have a good week dude.
Great video Chris...Very detailed and explained very well. Good job.
Yup, James said it for me.
Nice video brother! Gonna put our Hyd Press to work this weekend 😂💪
I know this is an older video but I trick I have used on ball joint insertion is to put them in the freezer for several hours before Installing.
Superrrrrrrrrrr Thank you Chris
Good job!
Any plans on making a suspension bushing replacement tutorial? These vids are very helpful!
Yes
Probably a dumb question but are the front upper and lower ball joints the same as the rear upper and lowers? I can only find the fronts online.
Is heat when removing and installing?
Hay can you share your ball joint part numbers...hope your year is getting better...keep up the good work on your videos they are great...Best of luck with the new project
www.corvettemods.com/C5-C6-Corvette-1997-2013-Ball-Joints--Upper-or-Lower_p_8941.html?gclid=CjwKCAiAiML-BRAAEiwAuWVggotMP40AEwrtjcqQof0ggc66ZGFQYQvc9P7kNR_VhDg878CbuEPJbxoCVHAQAvD_BwE
do you have to remove the rear axles to do the rear ball joints?
Castle nut and cotter pin.
Will that ball joint separator work for the bushings?
Did you do a upgrade for the C4 Corvette?
Great video, can you tell me the part numbers or the link to purchase the same ball joints? Do you know if the rear ball joints are the same than the front?? Thanks
Top and bottom are same front/back. There are a variety of brands to choose from. That’s why I didn’t provide part numbers. Everyone has their preference.
I just learned that there are different types of bushings for different types of Rides/Handling. One type of bushings from Summit or somewhere cost over $1000!!!! but it was for track mostly and very uncomfortable for road. What type of bushings did you choose? Thanks
I have 2 videos on the bushings. Check them out.
What ball joints you used and where You purchased these ?
Are the front ball joints set the same as the rear?
Yes
How many miles on the ball joints you replaced?
Hi Chris, great videos, I have a C5 and they are very instructional.
From who did you buy the ball joints from and what brand are they, I need to do my rear suspension including the rear outer tie rods.
Thank you
I got them from Corvette Mods. Generally they are not my go-to vendor, but I’ve had good luck with them recently.
I use top flight auto for all my corvette parts and accessories
a 1500$ lift would make your life so much easier
I have one. And you don’t need the car 5’ in the air to do this.
Torque specs call for say 15 ft lbs then 160 degrees 33 ft lbs please explain what this meens. Great video !
3 passes. 15ft lbs first pass, turn 160 degrees 2nd pass, 33ft lbs 3rd pass.
@@mycorvettelife I would like a demonstration to fully understand! Yes I'm anull!! LOL but do love My C5 and do all My work! Keep the videos comming! Wave from Alabama!
Any suggestions on the REAR bottom ball joint... no room to get the 6mm with the axle and can’t seem to get the separator fork in far enough to get the arm on top of the bolt....🧐
You have to pull the axle out.
@@mycorvettelife that was a challenge. Glad they put flexible ends on it. TIGHT spacing... thx... now I gotta see if Autozone has a wider separator. The one from harbor freight is too narrow on the bottom one.
BTW... one of these meets I will buy you a burger for all the help. I’m a zonie as well....
Had to use a combo of both joint separator tools. The bottom casting is way thicker. Thanks again for the help !
Hi Chris where did you Source your ball joints from because eventually I'll probably have to do the same and please keep up these awesome videos!!
Corvette Mods.
@@mycorvettelife thanks, much appreciated 👍
Hey Chris, what size rear tires are you using?
325. All my specs are in the video description.
What was your part number for the rear lower ball joints, was it the same as the front lower?
www.corvettemods.com/C5-C6-Corvette-1997-2013-Ball-Joints--Upper-or-Lower_p_8941.html
Front and real lowers are the same. Front and rear uppers are the same.
Are the front and rear ball joints the same?
Yes. Upper and lower are different sizes.
A little heat goes a long way on the aluminum getting the joints out/in.
Wondering where you bought your aftermarket camshaft for your c5?
One of the previous owners installed it. It’s from a company that doesn’t exist any more - Thunder Racing.
My Corvette Life oh okay. Do you know or recommend any other cams for a c5?
I would recommend either Brian Tooley Racing or Texas Speed
Hitting the side of the spindle works awesome and few people know that trick. But don’t be a wuss about it. You really Gotta put some ass into it with a big hammer. -mini mallet
(At least for rusted 245k mile duramax silverados)
That's what I do I hit the side of the spindle
Is it totally necessary to remove the UCA from the car? I thought you could just separate the bj from the UCA and that's it. You'd be ready to separate the lower bj.
Probably not, but its easier to remove 4 bolts than fight with it.
@@mycorvettelife So is it a clearance issue? I couldn't tell. Thanks for making the videos. I'm looking to get a C5 here soon. They're a bargain right now!