How to make a Roll Grinder for only $15 - The perfect sharpening device for your Swiss Army Knife
Vložit
- čas přidán 21. 04. 2023
- In this video i will show you, how you can make a wonderful, well working Roll Grinder with simple tools everyone have in his workshop.
- Diamond Disc
de.aliexpress.com/item/100500...
- Fiberglass Cutting Disc
de.aliexpress.com/item/326529...
- Bearing Pulley
de.aliexpress.com/item/100500...
- Rubber Rings
de.aliexpress.com/item/100500...
👉 Victorinox Online Shop: www.victorinox.com
👉 Links for my books, Swiss Army Knives and equipment below
👇👇👇
🇩🇪 🇦🇹 🇨🇭 Mein Amazon Shop: www.amazon.de/shop/feliximmler 🇺🇸 My Amazon Shop: www.amazon.com/shop/feliximmler 🇬🇧 My Amazon Shop: www.amazon.co.uk/shop/felixim...
➡️ Instagram: / feliximmler
➡️ Facebook: / felix.immler
➡️ Website: feliximmler.ch - Zábava
Great DIY Video as always. Very inspiring! The people at HORL should also make a smaller version optimized for SAKs and sell it together with you as „Felix Immler Edition“ 😊
Thanks for this compliment! :-D
Gar keine schlechte Idee, kann nicht schaden für unterwegs so ein Gerät im Handschuhfach zu haben... Gruß aus Oberbayern. 👍🏻
Felix's projects are the highest form of praise. Taking an idea and making it better. Sharing it is just gravy for us.
Thank you very much!
...und mal wieder `ne schöne video aus der Schweiz....Danke, und Grüsse aus Frankreich jetzt!!!😄
Vielen Dank und Grüsse vom Bodensee
Danke für das interessante Video! Das Parkside Schleifgerät war auch nicht schlecht😏
sehr gerne... LG
👋🔥✌️Hello, Felix. Thank's a lot 👍👍👍!
Thanks for your comment!
I'm lucky enough to have a friend who sharpens blades, but this was still a great video! My friend also have a bottle of whisky for me, I need to dull some knives so I have to visit him :-D
The roll sharpener was great but what really made me go "Whoa!" was the tiny 'bushcraft' BuckHackSaw. I must make one of those. Thanks Felix 🖖
You my friend are the Victorinox Beast!!!!! This company should hire someone like you for the creativity. The Victorinox Beast Cronicles. Thank you Felix.
Great little project Felix.
This is exactly what I’m looking for Felix. Cheers!
Super!!!
Thank you Felix, very good
Thanks a lot!
Das gute alte Zeugs von Parkside,tolles Video 👍
Danke Jürgen!
Wow, so cool! What a nice solution to an everyday problem! Very attractive sharpener!
I'd really like to know more about the saw!
Haa ha haa thank you! czcams.com/video/pCB4-ZtC33I/video.html
Tolle Idee! Eventuell könnte man die feinere Seite mit Klett und feinem Nassschleifpapier vielseitiger (tauschbar)machen. Ich denke Silicium Carbid Schleifpapier würde das Ergebnis deutlich homogener werden lassen . Ich habe bei Convexen Messern bis zur 3000er Körnung und danach mit einem 10micron und für einen Tacken mehr, mit der 3
Micron Paste super Ergebnisse erzielt.
You're a true Macgyver of the Swiss army knife an everything else. Have a nice day!!! ✌️❤️😎
Thanks a lot dear Joe!
@@FelixImmler You're welcome. Love your videos!!! So gotta get me a Ranger or Huntsman model soon!!!
@@FelixImmler an your book too!!!
Hallo Felix, wenn ich könnte, würde ich Dir für diese tolle Bauanleitung 1000 Daumen nach OBEN geben. Herzlichen Dank!!
Vielen Dank Peter!!!
The diamond paste bumps the project's Bill of Materials up a bit ... (and the tools).
But still definitely impressive results. Very. PLS do more videos on stropping, too !! :)
Love that little saw! ❤❤❤
Haa ha ha, danke Ulf!
Woww incredible work. Thank for video
Thanks a lot!
Das sind Super! Danke, danke, danke
Gerne 😊
“Welcome to the channel of Felix Immler (half-human, half-ultimate outdoor Swiss Victorinox coolest do it yourself dude of the whole internet!)
I mean, if this isn’t the best explained ánd filmed do-it-yourself project, then perfection doesn’t excist…
And I know I said it before, but will repeat: Ray Mears, eat your heart out…couse there’s a new sherrif in town!
Cheers sir ✌🏼
Thank you so much for your super kind comment!
Awesome Felix¡
Thanks.
I am designing a similar one, but with a thinner middle pipe, only the edges thicker.
You never cease to amaze me Felix. Thank you once again for your wonderful ideas.
Using your system, I will use 800 and 1200 grit sandpaper to maybe get a sharper edge.
Keep those videos coming, I learned so much from you.👍👍
Your comment makes me happy! Thank you very much!
A lot of work to make a knife sharpener, but very interesting from an engineering standpoint . Thanks Felix for another very interesting and useful video.
Thank you so much for this compliment!
~~~ i dont own a workshop or tools of such but I love to see you putting value into others! Keep it up Brother! May the Force be with you!~~~
Thank you so much!!!
I love how you think out of the box for new ideas!
Thanks a lot Jim!
I made my own too.. using PVC pipe, mdf, ball bearing
Do have a picture?
Very cool. Thanks!
Thanks a lot!
Another winning video! Thanks.
Danke Kurt!
Wow!!! Really interesting video here 😎👍
awesome idea my friend
Greetings from South Africa. Love your videos!
Wowww, thank you so much!!
Very imaginative and effective. Sadly, I cannot make one for myself. I lobe Swiss Army knives!
Howdy Felix. Now that was a great invention you made for sharpening our Swiss Army Knives! Thank you Sir. Later on Felix.....
That was really interesting. Thanks!
Thank you Felix
Very Useful Project and Cheap. Thank You For Making This Video
Thanks a lot for watching!
Love this idea!!! I just bought enough supplies on Amazon to make 5 or 6 of these, and I’ll be giving them away as Fathers Day, birthday, and Christmas presents this year. Thanks so much for the video!
greatest tips there, Felix. I've learnt LOTS from you, so many thanks for this nifty tuitional video! Wendi 🌻
Most of the labor and equipment used in this video is to make a rectangular piece of wood into a smooth cylinder shape. Most people do not have all of that equipment. It would be better to just make out of a wooden closet rod used for hanging coats. These are available at Home Depot or other hardware stores with a 1-inch diameter (25mm). I might try this. Thanks you for making so many great videos Felix.
Go your own way... there is nothing wrong!
He used a hole saw…. Not much more simple than that…. The rest is just finicky lol
I made the same thing a couple of years ago. At 4:43, what I did was insert - what I call the barrel - into my drill press and hold some fine sandpaper against the barrel to smooth down the sides.
You've got a great idea Mr. Immler. Thanks for sharing.
Thanks Felix’s 👍 I like it
Hello Tony!! Thanks a lot my friend!
Incredible.
Thsnks a lot!
Brilliant DIY project 🏆 Greetings from Norway
Thanks my friend!!
Top, muss ich gleich nachbauen. Danke Felix
Great job Felix!!! Love it!!
Thanks a lot!
I was looking at those rull grinders but always thought they were priced steeply for my requirements. Great video as always !
I have a Parkside (Lidl) disk sander too, I've been using it for over 4 years now. It's been a great buy for me.
loved the little handsaw. It looked like it was made by you too
Yes...czcams.com/video/pCB4-ZtC33I/video.html
Mini Bucksaw.... czcams.com/video/pCB4-ZtC33I/video.html
Good guide how to make a Roll Grinder owning equipment for $5k+. :D
Like anyway ;)
Thank you very much!
This was fantastic, Felix! Have a great Sunday!
Felix, you are wonderful. Well done. Respect.
Another cool tool! I like the scaled down version. Perfect for those small blade profiles. Thanks Felix. Hope all is well with you.
Very nice.
Thanks a lot!!
Absolutely brilliant!
Hey Felix who cares if a video is later than expected. It’s always enjoyable to watch yours and I learn a lot. Vielen dank mate
Thank you so much!!!
Felix, du bist mein Held! Klasse Video, danke dir!
You always surprise me with your tricks, but today was a master class. Today you have become a genius. My congratulations
Most interesting way to sharpen knives I have seen in a long time. I like the idea and design. Thank you for sharing it.
Thanks a lot my friend!
This is a very interesting project. Never thought this was possible. I started collecting kitchen knives and was forced to learn how to sharpen them. Rechecked my victorinox and resharpen them. I use a 600 grit DMT plate and I find that I only need 1 pass to create a burr. Just honed them on a padreno rod then strop them on my belt 😂. Learning about steel and rockwell scale I learned that pocket knives are softer especially compared to japanese steel . Good thing I only collect them so need not sharpen them regularly. I started with German Knives and they serve me well. Rocking a wusthof classic and zwilling pro knives now. Back home in my country I saw a group selling used or previously owned japanese knives that are very very affordable so planning to add them soon as well on my future collection. Nonetheless victorinox swiss knives were my first collections together with Leatherman , sperdco and few opinels. The SAKs abd the PM2 are a breeze to resharpen. By the way, I was lured to knive collection turned hobby because of someone named Felix.😅
Fantastic video as ever Felix. You truly are the King of the SAK world!!!
Thank you so much!
Great video, awesome content.
Thanks Felix!
Thanks a lot!
Thanks Felix
Another genius idea!
this is really awesome. thanks a lost for not only showing how to build such a tool, but also for testing it.
Very cool idea! I may do a 3d model, for printing..if I'm not lazy, of course :))
Extremely clever you are. Thank you!
Very nice! As always, an excellent video. Thank you!
I wish I had a mind for creative things like this. Your mind is so fascinating, Felix! Great work as always - thanks for sharing.
You sir never cease to amaze. This looks perfect. What a simple solution for swiss army knives, and how easy to customize with an even finer grit head!
hello Tim . Thank you so much for this wonderful compliment!
This is totally new to me. I like the idea of always having the right cut angle. I use a bucher rod but I'm never quit sure if my angle is ok. Thanks Felix for another very interesting video and take care.
It's absolutely brilliant work 👏
Excelente herramienta, muhas gracias sr. Immler!
Nice sharpener and nice DIY build! In general, any guide that maintains consistent angle and eliminates the human “wobble factor” is good. This sharpener looks very handy and easy for anyone to use.👍
More genius. That was amazing to watch! I’ve never heard of such a sharpener. Double learning for me!
thanks felix ! Your tool is very useful..
Excellent idea and it worked very well, my friend! Thanks so much for showing this inexpensive way to make your own!
Sir I love your creativity and your willingness to share it with all of us. Thank you!!!!
Thanks @TAOutdoors for referring this channel
Thanks for visiting my channel!
Was für ein geniales Projekt! Das könnte tatsächlich das erste sein, dass ich nachbastle 😁👍
Another really clever idea, Felix! Thanks for showing this!
Thanks a lot Bill.
Interesting I've never seen a hand held roller grinder for sharpening a knife . Great Job as usual.
I must admit I had envisioned a different type of Grinder , similar to what one would use to grind up some herbs
hello Paul. Thanks a lot for your comment!
Brilliant. Great work dude. 🙂🙂
Thanks a lot!!
Excellent as always! Grazie.
Great idea! And easy to make.
I would give an option to print it out with 3D printer, and to make the end of the ramps to be at the level of the strop. This way it will be more like smooth transition from the ramp on to the strop instead of repositioning the knife.
Anyway - great job!
Thanks for your inspiration!
Very cool. I really like how you incorporated the angle guides for stropping, bravo 👏
Thank you very much!!
Hallo Felix, danke für das super Video! Du hast den Schärfer super schön und edel gemacht! Wow! Liebä Gruäss us Züri!
Danke mein lieber Freund!
Nice touch with the cutting edge detail,you see the remarkable difference
Well done Felix
Thanks a lot dear Steve!
Effective AND beautiful...brilliant! 🙂 Thanks for sharing.
Thanks for watching!
Thank you.
Awesome job brother. You have great skills. I am impressed. You make everything look so easy.
Very inspirational. Thank you for this one Felix. This one is giving me some ideas.
Super... that makes me happy.
What an amazing video - thanks Felix - Thumbs Up!
Thank you very much!!
I've learned more from this channel than most people did in school!I really do appreciate all of your hard work and knowledge,maybe one day victory Knox knives will give you a special job teaching all the wonderful things that can be done with their knives!
Thank you very much!!
Wieder einmal ein großartiges DIY-Video, was ich auf jeden Fall umsetzen werde! Ganz lieben Dank und Glück auf aus dem Ruhrpott..😁👍
Das freut mich wie verrückt :-D 1000 Dank!
Excellent, Felix. Now, can you please make a telescopic version which can compress into a slim hockey puck shape for pocket carry?
Well worth the wait, brilliant content as ever
Thank you so much!!!
Great idea! going to make one on my lathe. Love that bow saw as well.
The one at 5:30 (or thereabouts)? Yeah, that rocks!
Simply brilliant 👍👍
Thanks a lot Dave!