Loving your vids bro. I love your thought process, and your attention to detail. New sub and will be watching more of your vids as I'll be a new DRZ400SM owner soon. Take care and keep up the awesome work. Rick
@linksgarage1985, I also love your DRZ400 videos and have also subscirbed. When do you think you'll do a clean air mod and video of it on the bike? I get some oil in my airbox from wheelies and have been looking forward to a clean install for this modification. With your awesome attention to detail, I know you would do it right no doubt.
My question is this, what happens when you wash the motorcycle with high pressure water? The cut allows the entry of more air to the engine but also of water easily. I love your videos. Regards.
Does that even do anything? I’ve ridden with my friend with the air box door off. We have the same bike, same weight and everything. Didn’t notice anything when we raced. I guessing you have to do all 3 together?
After you do exhaust, and fuel, more air is needed. Yes. It’s best to run all 3. So to answer your question. Yes. It does. In conjunction with a rejet and exhaust. If you don’t do the other 2, it will run 2 lean. And you could potentially lose power. Thanks for watching!
Just wondering I have the 2009 Suzuki DRZ and I was concerned about water going into my airbox , I often ride in raining conditions . Is this something that I should be concerned about
Hey man did you have to readjust the mixture on the carb after removing the charcoal canister? Took it off mine last night, and now the bike idles really rough and sputters out. I primed the carb and it ran a bit better, but as soon as i switch the petcock to "ON" it starts to idle rough and if i give it gas, it backfires super loud! Not sure what happened, I did exactly as the walkthrough says, remove canister, cap the bottom of the carb, and guide the tank relief hose down to the bottom of the bike. Didn't touch anything else. So not sure what the issue is, or if you had a similar problem when removing yours.
My bike didn’t have a charcoal canister. That’s only California and Canada bikes I think. I did remove the pair valve. And yes. If you are opening up air box, you need an exhaust and to rejet the carb to make it run right.
@@linksgarage1985 I assumed it had to do with emissions, so it makes sense, even though I'm in AZ, but the bike is probably originally from Cali. Bike is already re-jetted with a JD kit and has a MRD exhaust. I ended up figuring out that the vacuum line was disconnected from the petcock after i removed the tank. Bike's running fine now. Love your build! Gonna do the PAIR valve and a Raptor petcock next. 👍
.......I'm going to do the 3 X 3 and rejet. I am not going to the expense of buying a new exhaust....just don't care to spend that much, etc. My bike is stock right now and I'm pretty happy with it's performance as is. Going to do minor mods only. 2023 S model....
@@linksgarage1985 I did the 3X3 mod and the JD jet kit. Its bogging a lot, to the point where it will stall itself. I followed the directions perfectly, im not too sure what is wrong with it.
............general comment not about this video.......I wish creators did not add music. Unnecessary and many of us have hearing issues, but my comment is no reference to this video.....
Bro! all your stuff is gold. Thanks for all your help FR.
Hell yea!!!!!!! Thanks man! Much more to come! I appreciate you watching.
Nice garage bro! Flags and clean AF. Should show how to adjust the rear suspension next!
Thank you! I may do that!
Loving your vids bro. I love your thought process, and your attention to detail. New sub and will be watching more of your vids as I'll be a new DRZ400SM owner soon. Take care and keep up the awesome work. Rick
Hell yea!! I appreciate that! Well I’ve got about 35 DRZ vids or so. Should be able to help! Thanks for watching I appreciate it!
@@linksgarage1985 You kiddin me, you did an amazing job with your vids so THANK YOU!!!
@@willnate35 thanks dude!
@@linksgarage1985 Thank
HeatGun, Brilliant. I'm going to go do my three-by-three mod right now.
💪🏼💪🏼💪🏼
How'd it go?
@linksgarage1985, I also love your DRZ400 videos and have also subscirbed. When do you think you'll do a clean air mod and video of it on the bike? I get some oil in my airbox from wheelies and have been looking forward to a clean install for this modification. With your awesome attention to detail, I know you would do it right no doubt.
Nice seems easy enough
It is!!!
Thank you for the video
Thanks for watching!
Great video!
Thank you!!!!!
Links garage. I like it.
Thanks Man!
My question is this, what happens when you wash the motorcycle with high pressure water? The cut allows the entry of more air to the engine but also of water easily. I love your videos. Regards.
Nah. It’s hidden under the seat. I’ve never had an issue
Does that even do anything? I’ve ridden with my friend with the air box door off. We have the same bike, same weight and everything. Didn’t notice anything when we raced. I guessing you have to do all 3 together?
After you do exhaust, and fuel, more air is needed. Yes. It’s best to run all 3.
So to answer your question. Yes. It does. In conjunction with a rejet and exhaust. If you don’t do the other 2, it will run 2 lean. And you could potentially lose power.
Thanks for watching!
Just wondering I have the 2009 Suzuki DRZ and I was concerned about water going into my airbox , I often ride in raining conditions . Is this something that I should be concerned about
Negative. It’s on top.
Hey man did you have to readjust the mixture on the carb after removing the charcoal canister? Took it off mine last night, and now the bike idles really rough and sputters out. I primed the carb and it ran a bit better, but as soon as i switch the petcock to "ON" it starts to idle rough and if i give it gas, it backfires super loud! Not sure what happened, I did exactly as the walkthrough says, remove canister, cap the bottom of the carb, and guide the tank relief hose down to the bottom of the bike. Didn't touch anything else. So not sure what the issue is, or if you had a similar problem when removing yours.
My bike didn’t have a charcoal canister. That’s only California and Canada bikes I think.
I did remove the pair valve. And yes. If you are opening up air box, you need an exhaust and to rejet the carb to make it run right.
@@linksgarage1985 I assumed it had to do with emissions, so it makes sense, even though I'm in AZ, but the bike is probably originally from Cali. Bike is already re-jetted with a JD kit and has a MRD exhaust. I ended up figuring out that the vacuum line was disconnected from the petcock after i removed the tank. Bike's running fine now. Love your build! Gonna do the PAIR valve and a Raptor petcock next. 👍
@@juliohedrosa-sigler2440 hell yea! Thank you man. I appreciate you watching. Glad you got it fixed!
Which jet kit does a person use after this? I looked but did not see
Here’s a video. Good luck! czcams.com/video/GknR8d5DDmM/video.htmlsi=fYeQlulvnTbUaPV6
Did you by chance do a before and after mpg?
I didn’t. Sorry about that.
Do you need to re jet with this mod?
A jet is recommended. I have a video in that as well if you are interested. Thanks for watching I appreciate it!
are you able to do just the exhaust and not run with the re jetting kit and 3x3 box mod.
You can. But it might not run great
@@linksgarage1985 alright do you know if drilling the fuel screw plug out and the 3x3 box mod void the bikes warranty by chance
@@xxcamobuckxx7423 no clue. Sorry.
Thanks for your help you make really good content and love your bike
@@xxcamobuckxx7423 thank you for watching I appreciate it!
Guys does it make any sense to make 3 by 3 air box with stock exhaust?
Not really. I’d just remove snorkel.
.......I'm going to do the 3 X 3 and rejet. I am not going to the expense of buying a new exhaust....just don't care to spend that much, etc. My bike is stock right now and I'm pretty happy with it's performance as is. Going to do minor mods only. 2023 S model....
@rickthompson1422 have you done the exhaust yet? 😂 it seems like the 3x3, a rejet and an exhaust are usually all done together.
I took just my snorkel out and my bike died. Had to push it a mile back home. It would run, but eventually died with any throttle
does this work on S version too ?
Yes
If you do this does it then need to be jetted?
I’d recommend it. If not, it’ll be pretty lean.
@@linksgarage1985 I did the 3X3 mod and the JD jet kit. Its bogging a lot, to the point where it will stall itself. I followed the directions perfectly, im not too sure what is wrong with it.
@@ianmorin9824 turn the idle screw up
You left the same filter?
No. K&N
Informative, but the audio levels for the music is way too HIGH.
............general comment not about this video.......I wish creators did not add music. Unnecessary and many of us have hearing issues, but my comment is no reference to this video.....
Suzuki drs 400 sm timin no pawar
What are the benefits of this please
@@mattybrap more air