SRAM DUB Pressfit 30 Bottom Bracket Fitting Guide
Vložit
- čas přidán 6. 09. 2024
- SRAM DUB PressFit 30 MTB Bottom Bracket Fitting Guide If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com...
Buy me a coffee
www.buymeacoff...
Show your support via the Patreon page
/ freetocycle
Follow me on Instagram
www.instagram....
info@freetocycle.co.uk
Thanks for watching.
Thanks for the excellent video, covered my issue perfectly. I'm switching a BB30 out for a SRAM dub BB30 crank and I couldn't tell how far the shells needed to go in. Your close-up was spot on.
I usually do the pressing in part one at a time. my tool has ridges on the drifts so it fits nicely on the shell on the opposite side. I've never had an issue doing it this way other than it takes a lil bit longer..
Great video. I want to get myself that tool you used to punch the cups out. Do you remember the park tool model number please?
Is that the RT-1 or the RT-2 you are using to remove the BB
Do you know if its possible to remove the bearing from the cup and replace/clean them? i know they are kind of cheap but good to know. dont have dub yet.
installed the Dub BB30 with grease and at the second ride started to creak , should I clean the grease and apply loctite? Thanks for all the helpful videos 👍🏻🙂
If it’s definitely the BB then I would try loctite on the cups!
Can you tell me tool name to install/press bottom brackets? I can't find it.
For greasing the outer of the cup on a carbon frame - would PPL-1 be an appropriate choice?
Yes!
Hi sir what is the size of bb for sram xo crank pf30? Tnx.Godbless
Do these cups come with a super special strong f$k/ng glue right? Mines are like stock on it, don’t wanna come out.
I always hear a scream when I go in dry but that just may be my tool or technique 😬