Video není dostupné.
Omlouváme se.

SunJoe SPX3000 XTREAM REVIEW ANY GOOD? 🤷🏼‍♂️

Sdílet
Vložit
  • čas přidán 6. 08. 2020
  • ➥Orifice Universal 1.1 mm Thread Nozzle- geni.us/ALLTHE...
    ➥Adjustable Snow Foam Lance Foam Cannon Foam Blaster- geni.us/cT0XqG
    ➥1 x “Sun Joe SPX3000-XT1 XTREAM Clean Electric Pressure Washer | 2200 PSI Max” geni.us/SBlQEkJ
    In this video, I review the New SPX3000 Xtream Pressure washer. I also compare the foam cannon that comes with the unit to an aftermarket foam cannon from amazon and show how much better it is.
    Items used- This part will make your Foam Cannon 10X better-
    ➥Orifice Universal 1.1 mm Thread Nozzle- geni.us/ALLTHE...
    ➥Adjustable Snow Foam Lance Foam Cannon Foam Blaster- geni.us/cT0XqG
    ➥1 x “Sun Joe SPX3000-XT1 XTREAM Clean Electric Pressure Washer | 2200 PSI Max” geni.us/SBlQEkJ
    ➥ Chemical Guys Honeydew Snow Foam- geni.us/re0rf
    ➥ 62’’ Car Wash Mop with Aluminum Long Handle- geni.us/BkNGs
    ➥ Snow Joe Sun Joe SPX3001- geni.us/FIlBDc​
    ➥ Sun Joe Snow Foam Cannon- geni.us/Sunjoe...
    ➥ 25’ Pressure Washer Extension Hose- geni.us/4PzbGnn​
    ➥ Chemical Guys Honeydew Snow Foam- geni.us/re0rf​
    ➥ Chemical Guys Scratch-Free Wash Mitt- geni.us/BWPcUX​
    ➥ Chemical Guys Best Car Wash Bucket Kit - geni.us/1rDOa​
    ➥ Chemical Guys Cyclone Dirt Trap- geni.us/CarM​
    ➥ Chemical Guys Heavy Duty Bucket- geni.us/p98Xy​
    ➥ Blake's Garage T-Shirts: www.wrenchon.com​
    Car Detailing Products I use:
    ➥Chemical Guys EcoSmart-RU geni.us/RBKnKM​
    ➥Chemical Guy Hybrid V7 Optical High Gloss Spray geni.us/xKzh3o​
    ➥Chemical Guys Diablo Gel Wheel and Rim Cleaner geni.us/Urx1yd​
    ➥CarPro Reload Sealant Spray geni.us/buqnk​
    ➥CarPro PERL Coat Plastic & Rubber geni.us/BjCTE​
    ➥Durafoam Contoured Large Tire Dressing Applicator geni.us/AIcHNc​
    ➥Chemical Guys Lava Luminous Glow Infusion WAX geni.us/czqtfl​
    ➥Chemical Guys Light Duty Clay Bar and Luber Synthetic Lubricant Kit
    geni.us/NxJc​

Komentáře • 295

  • @StlPike2004
    @StlPike2004 Před 2 lety +77

    Question. Aren't you supposed to spray the car with water to get basic surface stuff off, then use the foam cannon and let it sit for a couple minutes, rinse that off, then foam it again and wash? If you simply foam it and start with your wash mitt you're just moving the dirt back and forth across your car. Letting the foam sit and spraying it off gets a lot more grit and grime off, then foam it again and hand wash it. Helps prevent scratches.

    • @christopherpaulo6818
      @christopherpaulo6818 Před rokem +22

      Yes. Yes you are. And he’s scratching his car.

    • @alexchristensen8098
      @alexchristensen8098 Před rokem +5

      @@christopherpaulo6818 if its a used car, its scratched already.

    • @BodegaMo
      @BodegaMo Před rokem +1

      Correct

    • @betsysaines9635
      @betsysaines9635 Před rokem +3

      @@christopherpaulo6818 that mop he used to wash the car on a stick was so bad.

    • @lucasornelas6113
      @lucasornelas6113 Před rokem

      Yup exactly I wasn’t even paying attention to that 😂

  • @alabaska182
    @alabaska182 Před 4 lety +52

    You can scratch your car if you wash your car this way @ 12:39 don't do this, rinse car > foam cannon (let it sit a bit) > rinse car > double bucket hand wash with wash mitt and grit guard in rinse bucket > rinse > dry with thick microfiber towel

    • @Ps3COD4Fan
      @Ps3COD4Fan Před 2 lety +2

      It hurt to watch him do that!

    • @shawonr3325
      @shawonr3325 Před 2 lety +2

      he mentions a bit later that he used that because it's just a quick light wash, and if it was dirtier he'd do a full wash with the buckets, etc.

    • @ledzeppelin1212
      @ledzeppelin1212 Před 8 měsíci

      ​@@shawonr3325yes! He says it around the 13:39 mark.

    • @Koji-888
      @Koji-888 Před 6 měsíci

      It’s fine. Do you folks have old dirty mops with grit and gravel in them.?
      Keep your mop head clean. Do the rocker panels last.

  • @rmftrushing6591
    @rmftrushing6591 Před 2 lety +19

    If you want your concrete actually clean, you should use the 15° and hold it 1 inch away. That's how you actually "strip" the concrete, and get it looking brand new. I bought the 2200psi version of this, and it works very well on concrete. My driveway and sidewalk were almost black. Very pleased with my purchase.

  • @brookedepagter5098
    @brookedepagter5098 Před 2 lety +17

    Just ordered the SPX3001. Thanks for the info on both! I just need it to wash vehicles mainly and the reel seemed extremely useful over the foam cannon that they give with this one. Ended up ordering the Amazon cannon and some chemical guys products too! Appreciate you taking the time to make these videos. And you’re right…if there’s dust on it, it’s dirty!

    • @danielshallberg9266
      @danielshallberg9266 Před 2 lety

      How do you like it? How’s the foam

    • @spadesmaster2153
      @spadesmaster2153 Před rokem +2

      Booke you said, "Sun Joe SPX3000 I just need it to wash vehicles mainly.." could you please tell me is it worth buying? Did it last? Please advise.

  • @Gnik4144
    @Gnik4144 Před 3 lety +9

    I bought mine about a year ago and it works great. Obviously it doesn’t put out a ton of power but for cleaning the deck, cars and house it works very well.

    • @Gnik4144
      @Gnik4144 Před 2 lety

      @Bobby D I love this pressure washer! I just used it to wash both the cars the other day. It cleans the front and back deck very well. For being electric it’s very powerful. I would definitely recommend it.

    • @Gnik4144
      @Gnik4144 Před 2 lety

      @Bobby D anytime man

    • @kirkfavre3017
      @kirkfavre3017 Před rokem

      Cool I didn’t know it could work for cars too

  • @SWAYLAB
    @SWAYLAB Před 4 lety +12

    I still have and use the original. It’s a great little pressure washer. 🧼🚗💨✨

  • @CookieManCookies
    @CookieManCookies Před 3 lety +2

    You get a thumbs up from the get go for not muting the water pressure engine noise. Bravo.. !

  • @johnw3794
    @johnw3794 Před 3 lety +6

    Glad to hear you talk about pricing. Even though you have a wicked car and Milwaukee tools. But still use a budget friendly pressure washer. I've been looking to buy this to clean the sidings of my house. Possibly clean the cars now that you've done a great review

  • @GaryEdmundsfromCork
    @GaryEdmundsfromCork Před 3 lety +13

    11:12 - *Sees beard, nods in approval.*

  • @Reecesavage-Alwayswin
    @Reecesavage-Alwayswin Před 3 lety +26

    Blake, bro you are so underrated im depressed.

    • @BlakesGarage
      @BlakesGarage  Před 3 lety +5

      Thanks Reece I appreciate that comment more than you know 👍🏼🏁🏁

    • @tt-ln4mc
      @tt-ln4mc Před 3 lety +2

      did you mean impressed?

    • @BlakesGarage
      @BlakesGarage  Před 3 lety

      @chb2 official still works great actually posted another video with it today.

  • @floridasaltlife
    @floridasaltlife Před 3 lety +9

    got the same one love it for the proce. I found a amazon reman and it was only $92 to boot and appeared 100% new !!!

  • @BryanMiraflor
    @BryanMiraflor Před 3 lety +8

    canon foam blaster link no longer working. can you recommend another one?

  • @daveharris7024
    @daveharris7024 Před 3 lety +34

    talks about not wanting to rub dirt into the paint, proceeds to not rinse presoak before brushing..brilliant

    • @FrenchValleyAirport
      @FrenchValleyAirport Před 3 lety

      I don't rinse the foam, but I also rinse the vehicle with the pressure washer prior to adding the foam. The foam has plenty of lubricity tbh

  • @deankay4434
    @deankay4434 Před rokem

    Parts like a hose has different ends as I found out look for my gas brand. 40+ brands list the end as "Does Not Fit Sun Joe" as they use a 15mm shank. All others that you can think of (45+ more) use a 22mm threaded end, with 1.5mm threads, checked with thread gauge from metric tap & die set. The shank is 14mm sealed with an O-Ring. Hoses are sold at 25' to 50' and can be connected. Remember that is low volume but high pressure so many use 2.0 GPM and up. Yours may vary. Parts for Sun Joe may only sold by the manufacturers website at the mercy of their retail. eBay completion keeps things reasonable.
    Automotive ASE Master Tech Since 78, Retired.

  • @NATURALGAMING
    @NATURALGAMING Před 2 lety +1

    This is one of the greatest CZcams videos I’ve ever seen straight o the point good voice for the explaination even LOWERED THE VOLUME WHEN HE VACUNMED !!!

    • @BlakesGarage
      @BlakesGarage  Před 2 lety +1

      Thanks I really appreciate the thoughtful nice feedback.

    • @NATURALGAMING
      @NATURALGAMING Před 2 lety

      @@BlakesGarage 🤣❤️❤️💪

  • @madeleinemontuna1185
    @madeleinemontuna1185 Před 3 lety +16

    You showed me how to remove the tips! Thank you 🙏🏾

  • @woahski5069
    @woahski5069 Před 2 lety +1

    This guy seems so chill

  • @ashes2ashes01
    @ashes2ashes01 Před 4 lety +5

    i bought this one about a month ago, 10x better than my previous greenworks machine

    • @BlakesGarage
      @BlakesGarage  Před 4 lety +1

      Glad to hear that! I definitely think this one does a great job for what most people need one for.

    • @enricke80
      @enricke80 Před 3 lety

      What kind of greenworks

  • @m4nc1n1
    @m4nc1n1 Před rokem

    Came for the power washer...stayed for the car! Nice Beemer and sounds great!

  • @17nano3
    @17nano3 Před 4 lety +15

    Thanks for the review, looking into this model myself

  • @aaronmunro5818
    @aaronmunro5818 Před 2 lety

    I love how you quickly change the nozzle tips. I found them so insanely difficult to get off. Manual is not clear at all.

  • @USNAVY37620
    @USNAVY37620 Před 2 lety +12

    Great review, I’m going to get one. They are having a Black Friday sale, it’s $89.00.

    • @leojohnwayne1422
      @leojohnwayne1422 Před 2 lety

      It’s $144 right now for the black one
      Should I wait?

    • @arefinrahman8443
      @arefinrahman8443 Před 2 lety

      I ordered off Amazon for 145 as well for a red one. I’m debating returning it if it’s really that cheap on Black Friday

  • @jstallworth6602
    @jstallworth6602 Před 2 lety

    Thank you, you did a really great job with showing how to work the pressure washer, now I can use it this time without breaking it, thanks again!😊

  • @JoseOrtiz-nx2rk
    @JoseOrtiz-nx2rk Před 3 lety +3

    Will the 1.1 mm nozzle and the foam cannon work on the regular sun joe not the extreme?

  • @hayden8415
    @hayden8415 Před 3 lety

    Got mine today and it makes good power and is surprisingly high quality

  • @danktank1959
    @danktank1959 Před 3 lety

    I got one for after those beach, desert days wash the trucks & toys off. Mainly wash salt off truck frame. Mix "Salt-Away" in foam cannon works perfect 😁👌

  • @esqueue
    @esqueue Před 2 lety +4

    The SPX3000 has a 14.5 Amp motor and has a rating of 2030 Max PSI and 1.76 Max Gallons Per Minute. It has two detergent bottles and a special soap nozzle that allows it to vacuum detergent from which ever bottle you've selected. From my experience, it seems to put out as much as the foam cannon did in this demonstration.
    The SPX300 XTREAME has a 13 Amp motor and has a rating of 2200 Max PSI and 1.65 Max Gallons Per Minute. It has a single foam cannon and some extra tools. The foam cannon seems somewhat worthless from this review though.

    • @MStar10
      @MStar10 Před rokem +1

      Thanks! This is exactly what I was trying to compare. So the spx3000 is the way to go right? Having the two separate soap bottles I think is super convenient. I just don't know the difference btwn 2030 vs 2200 psi? I 've never had one of these washers before. Any tips?

    • @ArtOfTheWeld
      @ArtOfTheWeld Před rokem

      what did you do?

  • @edwin.ccepeda8533
    @edwin.ccepeda8533 Před 3 lety +4

    When I click on the foam cannon it just takes me to the amazon main page please help

  • @roysol1101
    @roysol1101 Před 2 lety +1

    Awesome Vid....we just got ours and def will upgrade the foam cannon 😊👍👏👏👏

  • @jramirez31890
    @jramirez31890 Před 3 lety +7

    Just bought this exact one today. Definitley felt like a great buy for $99 + tax. I bought the chemical guys starter kit about two weeks ago. Havent been able to wash the truck yet but highly excited to do it sometime this week or weekend. This review made me feel like I made a solid choice.

    • @gogetter8470
      @gogetter8470 Před 3 lety +1

      Jorge R let me know how it is!!!

    • @paulespino6462
      @paulespino6462 Před 3 lety +2

      $99?!?!? Where? I'm seeing it go for $150 pretty much everywhere online.

    • @jramirez31890
      @jramirez31890 Před 3 lety

      @@paulespino6462 I bought it instore at my local home depot. I believe it was the last one of that model when I purchased.

    • @jonathanleal399
      @jonathanleal399 Před 2 lety +1

      @@paulespino6462 just got one right now at Walmart for $50 keep looking out 👀

    • @MrC9Oh3
      @MrC9Oh3 Před 2 lety +1

      Got 2 of them for $50 each at Walmart

  • @Steve43952
    @Steve43952 Před 2 lety

    Somebody needs to pay you. You made their Press. washer look good!

  • @J1Z06
    @J1Z06 Před 3 lety +12

    terrific video!! pretty sure ours has been sitting in the box a while,new! i just got my maxshine foam cannon today(Thanks to a link from Pan The Organizer). Very anxious to try it out....maybe tomorrow.. thanks for sharing this video. very nice car!!!!

    • @liverpoolHT
      @liverpoolHT Před 3 lety +1

      Hey how did the maxshine foam cannon fit? I have it too but it doesn't fit my simoniz pressure washer. Looking at getting this sunjoe well. Thanks!

  • @briang7254
    @briang7254 Před 4 lety +6

    If we buy this from Amazon does it help you in any way? I know other Youtuubers benefit from links from Amazon. I need a new pressure washer so...anyways hope you and Rachel are doing well have a great rest of your weekend buddy!👍

  • @Zeron18
    @Zeron18 Před 3 lety +2

    I still have mine just sitting around and collecting dust. It was too much of a hassle to connect everything, pressure wash something and waste a lot of time to coil up my 50' hose on that little machine. Upgraded to the comet 1700 and never looked back.

    • @Brees1986
      @Brees1986 Před 3 lety +1

      Do you not have to do all of that with the Comet as well?

    • @Zeron18
      @Zeron18 Před 3 lety

      @@Brees1986 the comet 1700 comes with an integrated hose reel on the unit. Just mount it to the wall, hook up a y-splitter for the cold laundry line to your pressure washer and you're golden!
      When you want to use it, you can just flip the valve to the cold water line, prime the pump and fire up the comet.
      No more having to connect the hose to the sunjoe, unravel the lines and plug it in. With the comet, it's all there, ready to go.

  • @thebeaststi4300
    @thebeaststi4300 Před 3 lety +12

    Great video! I like how you show us all the different options of tips.

  • @matthewhill6230
    @matthewhill6230 Před 3 lety +1

    I have noticed that the foam gun it comes with doesn’t produce with the soap knob all the way up. I had to turn back the soap knob from max to actually get more soap. It works best about half way.

  • @whoeverwhoever400
    @whoeverwhoever400 Před 3 lety +1

    i see many iwith higher PSI but lower GPM, and visa versa. Which stats should I look at? PSI or GPM? I will mainly use it for car wash and concrete/brick cleaning. Thanks

  • @HomanAlex
    @HomanAlex Před 2 lety +1

    I got the same one. I wonder if paint may damage wtih 40 degree nozzle?

  • @MikeEdwardsphotography
    @MikeEdwardsphotography Před 3 lety +2

    Thanks Blake for this helpful review. Greatly appreciated.

  • @robertgiorgi4473
    @robertgiorgi4473 Před 2 měsíci

    Just out of curiosity how come mine doesn’t start up as loud as that and doesn’t have enough pressured water coming out seems kind of weak

  • @krugger4326
    @krugger4326 Před 2 lety

    Thank you so much for this video, exactly what I needed to know.
    Great explained and yeah that other attachement is a must.

  • @Jeff-vj3jp
    @Jeff-vj3jp Před 3 lety +1

    Can you use the "Orifice Universal 1.1 mm Thread Nozzle" with the foam cannon that comes with the SPX3000 ???

  • @miguelrodriguez2723
    @miguelrodriguez2723 Před 3 lety +2

    Nice video man. Please please please don't use the brush on your car anymore! An extra 10 minutes to preserve your beautiful paint is worth it everytime

    • @BlakesGarage
      @BlakesGarage  Před 3 lety +1

      It’s a microfiber brush just like a mitt. What would I use then?

  • @MMT.Visuals
    @MMT.Visuals Před 3 lety +4

    literally just bought all the products. hope they work well!

    • @BlakesGarage
      @BlakesGarage  Před 3 lety

      Awesome! You’ll definitely enjoy cleaning with this.

  • @JJ-yx7vq
    @JJ-yx7vq Před 2 lety

    What’s the point of the 1.1 universal thread bolt? Where does it even go

  • @WaveManMike
    @WaveManMike Před 4 lety +1

    Which tip would you use for cleaning the bricks on a house?

    • @rickymassey5102
      @rickymassey5102 Před 2 lety

      sorry for being so late! i would try a 25° tip, but only if it’s really built up in brick!

  • @suzmaca650
    @suzmaca650 Před rokem

    Wow! What a shine afterwards…

  • @connersmart5017
    @connersmart5017 Před rokem

    I bought this soap sprayer but mine only sprays in a straight line. How do i make it spread like that?

  • @rogerharper3873
    @rogerharper3873 Před 2 lety

    Just saw a commercial and had to see what it was about.

  • @WaveManMike
    @WaveManMike Před 4 lety +2

    I know this channel is about your car but can you make a video of you pressure washing your wooden fence. I don't know why but I find those type of videos very satisfying.

  • @jritechnology
    @jritechnology Před rokem +1

    The warranty policy on these garbage units is horrible. Once it breaks (and it will break, I guarantee it if you use it like I do; which is three to four times a month for several minutes each time) you will need the original box. Don't have it anymore? You will have to go buy one from UPS or as the agent that speaks some other language natively, "your friends will have a box you can use, yes?" Well no, Mr. Agent named John which is a nickname because your real name cannot be pronounced. My friends do not carry 3 foot tall boxes around in their garages, and I certainly would not ask any of them for a box...like really? I suppose I could take a day off my job to go box hunting. Perhaps I could disguise myself as a homeless man and beg for a box under the guise I need it to live in. Or I can haul the unit over to the UPS store and pay a grossly inflated price for some cardboard. Either way it happens, I only have 30 days to send this POS back to them. I believe Sun Joe believes that all Americans are lazy, so they will use this policy in order to limit the amount of returns. Sun Joe is another terrible company that has fine print under their warranty to make sure not all units get returned.

  • @themdivision
    @themdivision Před 2 lety

    Love the review and the car bro! Great job.

  • @xscx888
    @xscx888 Před 3 lety +2

    Thanks man!! Just ordered, but one question. Do you know if the snow cannon same link you provided, but with the gun included will attach on to the sun Joe high pressure hose? I read some where that the hose on the Sun Joe is a 15mm attachment, and the gun with the foam cannon is a 14 mm. Are you familiar with any of this?

    • @Axl2011
      @Axl2011 Před 2 lety +1

      The Foam Cannon just snapped right into the end of my gun from a Sun joe spx3501.

  • @DJSIC82
    @DJSIC82 Před rokem

    I bought this same model Sunjoe and it started for about 5 seconds and didn't turn on after that. I returned it. I tried to fix it but it didn't work.

  • @B3ASTKING400
    @B3ASTKING400 Před 2 lety

    Me yelling at my TV that camera falling 😂😂

  • @MIHfishing
    @MIHfishing Před rokem

    Will chemical guy cannon work on this pressure washer

  • @Mousy86
    @Mousy86 Před 2 lety

    Anyway to stop it from leaking water?

  • @samuelportillo923
    @samuelportillo923 Před 3 lety

    Great video man. Btw, how hard is your water? Like you do use any water softener system?

  • @makavelimaxwell3826
    @makavelimaxwell3826 Před 2 lety

    What’s the 1.1 thread nozzle for ?? How do you us it ?? I got it but don’t know what to do with it.

  • @danielalvarez9720
    @danielalvarez9720 Před 3 lety +1

    Links to pressure washer and foam cannon invalid

  • @orangebannana7640
    @orangebannana7640 Před 3 lety +1

    The link to the blaster won't work for me, anyone else having this problem

  • @drumhq
    @drumhq Před 3 lety

    Does this consume a lot of soap from the bottle? Or does a mixture of water and soap go into the bottle?

  • @jamaal915
    @jamaal915 Před 3 lety +1

    U mind posting the links again? They’re not working for me

  • @maxtv1189
    @maxtv1189 Před 2 lety

    Hey brother, The foam Cannon you recommended is not clicking to the end of the sunjoe like the color nozzles it brings, Any suggestions? Will be using it soon :)

  • @christopherranieriranieri9870

    Yea you need to make sure your foam Canon has a 1.1mm tip on it for the best foam

  • @Whiteboy39thchi
    @Whiteboy39thchi Před 3 lety +1

    just bought one works great

  • @49ersforever90
    @49ersforever90 Před 2 lety

    Why does my water hose not fit in it is there another part I have to buy

  • @federicoavalos8811
    @federicoavalos8811 Před 2 lety

    Quick question is the link to the pressure washer the same one used in this video? They look similar but not the same and the psi levels are different from the description and link

  • @nathanvargas851
    @nathanvargas851 Před 2 lety

    Would u recommend this or the SPX3000 2030 PSI? I believed you reviewed that power washer too

  • @chriskeegan8919
    @chriskeegan8919 Před 3 lety

    Why did you switch to this one over the one with the reel for the hose?

  • @marctripp4827
    @marctripp4827 Před 2 lety

    So I need both of the first 2 links to hook up the foam cannon

  • @karenphillips8895
    @karenphillips8895 Před 2 lety

    Thank you❣ I'm sold.

  • @fl1ghtskool
    @fl1ghtskool Před rokem

    Why not remove the cardboard before washing?

  • @MrD508
    @MrD508 Před 4 lety +1

    What happened to your spx3001?

  • @Narenprime
    @Narenprime Před 3 lety +3

    Appreciate the review on the pressure washer and the foam canon also this video is very helpful, I purchased one looking at the aspects of how good the machine is

    • @BlakesGarage
      @BlakesGarage  Před 3 lety

      Awesome hope you love it!!

    • @Sistopha
      @Sistopha Před 3 lety

      I just bought both accessories after watching the car wash if the M4

    • @BlakesGarage
      @BlakesGarage  Před 3 lety

      @@Sistopha nice 👍

  • @tessloneill7978
    @tessloneill7978 Před 3 lety

    I turn it on but it only stays on maybe one minute. I followed the instructions in assembly.

  • @jdogg42
    @jdogg42 Před 3 lety

    Great review on the pressure washer 👍.... that car tho... 😍😍😍

  • @ledzeppelin1212
    @ledzeppelin1212 Před 8 měsíci

    Great video, man. Thanks!

  • @sexydane8964
    @sexydane8964 Před 2 lety

    I can’t get the soap dispenser to work. Used 0 and 40 nozzle like it said. Thinned the detergent, and checked tube for clogs. No luck. Anyone else know what I can do?

  • @clintagudo3061
    @clintagudo3061 Před 3 lety

    Have you tried using the built in foamer from sunjoe? Is it any good?

  • @franciscoxochical149
    @franciscoxochical149 Před 2 lety

    Will the Amazon attachment’s work on the spx3000 2030?

  • @JarredSalas
    @JarredSalas Před 3 lety +3

    Thats a badass car

  • @Chuckerson100
    @Chuckerson100 Před 2 lety

    Great review brother.

  • @brandonbdl
    @brandonbdl Před 3 lety

    Bought the Spx 3000 based off this and also a griots garage and mr. Pink soap, and holy crap. I wasnt actually expecting the amount of foam I got, I hope this setup last me !

  • @giovannipradowrp
    @giovannipradowrp Před 3 lety +2

    Beautiful M4! Where are you from? I just ask cuz I work at a BMW distribution center and there’s a chance that car might’ve went through us lol

    • @BlakesGarage
      @BlakesGarage  Před 3 lety

      Sacramento

    • @giovannipradowrp
      @giovannipradowrp Před 3 lety

      @@BlakesGarage I think they have a VDC there as well, but some of our cars do go over there. 50/50 chance it went through us.

  • @michaelbaker7021
    @michaelbaker7021 Před 2 lety

    A gas washer does 3200 psi. I have vinyl siding and I promise you will know why you need the extra 1000 psi! The electric will need a brush. The gas will brute force clean!

  • @subron14
    @subron14 Před 3 lety

    Which quick connect did you get?

  • @BlakesGarage
    @BlakesGarage  Před 4 lety +3

    Whats your favorite pressure washer setup?

  • @speedsterspeedy2146
    @speedsterspeedy2146 Před 3 lety +1

    Would you go with this one sunjoe xstream, or the sunjoe MAX??

  • @purifiedbleach1196
    @purifiedbleach1196 Před 3 lety +3

    Great review, thanks for showing it with a foam cannon. Do you use towels to dry the car or that blow dryer? I’m starting a detailing business and wanted to know the best and most efficient way of drying the car. Thanks

    • @BlakesGarage
      @BlakesGarage  Před 3 lety +2

      Blower first then a microfiber drying towel

    • @Joker-jz9cn
      @Joker-jz9cn Před 2 lety

      How as your business been going

    • @purifiedbleach1196
      @purifiedbleach1196 Před 2 lety

      @@Joker-jz9cn didn’t like detailing as much as I thought I would, I’m in car sales now and I just detail my own cars

  • @randomrazr
    @randomrazr Před 4 lety +2

    what camera do u use

  • @Dg-zj6jo
    @Dg-zj6jo Před 2 lety

    needs an extention on the wand if doing patios can you get extentions

    • @BlakesGarage
      @BlakesGarage  Před 2 lety

      Yeah you can sunjoe sell a whole accessory kit

  • @nnjvhvhhgc5213
    @nnjvhvhhgc5213 Před 2 lety

    What’s the link to the sponge on the stick tool?

  • @hulong0205
    @hulong0205 Před rokem

    It’s not about the pressure washer. It’s all about the foam cannon, the mix ratio and the foaming product.

  • @David07R1
    @David07R1 Před rokem

    Blake is your BMW a F82 ?? Also what color is it ?? Lol I just bought the sun Joe Power washer and was looking for a review but you’re Beautiful car distracted me lol I had ARC-8 wheels on my last car your wheels look bad ass!!!

    • @BlakesGarage
      @BlakesGarage  Před rokem

      Yeah 2018 F82 M4. Currently running 18x11’s now the new VS5-RS wheels with 315/30R18 Nangkang AR1’s squared

  • @randythomas8738
    @randythomas8738 Před 11 měsíci

    ... what foam cannon do you recommend with this pressure washer?...I don't want to spend a bundle... thx!😊

    • @lloydchristmas8282
      @lloydchristmas8282 Před 4 měsíci

      I use a $15 one from Amazon and I get super super thick foam just using honey dew from CG, and I've used both the Canon and my spx3000 also purchased from Amazon for 3 yrs and I wash 1-2 times per week on two vehicles even during winter if above 50° and it's still going strong! Don't know if it's a fluke or not?

  • @dirkit247
    @dirkit247 Před 2 lety

    That car is beautiful

  • @killerkennels9002
    @killerkennels9002 Před 3 lety

    What brand is it

  • @MrVoodoods
    @MrVoodoods Před 3 lety

    Hey Blake- Do you happen to have instructions on how to replace this orifice? I bought the foam cannon and the brass adapter that you recommend but I am not seeing a really great way to disassemble this thing. Is there a link or can you give me some tips?

    • @BlakesGarage
      @BlakesGarage  Před 3 lety

      Yeah, I show how to install it in this video. czcams.com/video/aSrCLQ7fJsA/video.html

  • @Patty-qd1lz
    @Patty-qd1lz Před 3 lety

    Could you tell me what kind of garden hose you use? There are so many varieties of garden hoses, I'm not sure what to get, Thank You.

    • @BlakesGarage
      @BlakesGarage  Před 3 lety

      I have one of these in my front yard and I absolutely love it for use with the pressure washer- amzn.to/3tTtS3L