UPDATE 9-1-21: THIS ISSUE HAS BEEN SOLVED. SEE THIS VIDEO czcams.com/video/8-EUs-9MhFA/video.html (Main output voltage needed to be calibrated) Thanks to everyone who commented!
Make a video of you calibrating, I had a similar problem with the 4 channel charger. Be sure you use a good multimeter OR plug in the battery in a charger you know is reading correct values and enter these in the calibration menu
IT IS about the voltage difference between your individual cells and your Main voltage of your xt 60 because your 4 cells With 4.2 volts should add Up to 16,8 v and Not above 17
Many Thanks for sharing this video.... I m having the same problem with my 4CH TOOLKITERC charger, and i couldn't charge any of my batteries, But know i can...
Hello. there was also such a problem. Tell me what the company said to you? Is the charger still working? maybe you already bought a new charger? which model?
is this only happening to you on full bats ? try this: turn battery selection on in settings this will give you a selection before it starts charging set bat type to lipo and enter cell count start cycle with all leads connected im guessing it is maybe guessing the cellcount wrong somehow and glitches
It seems like your main voltage sensor on XT60 isn't showing the correct value, on 4.2 on each cell it shows 17.08 instead of 16.8, maybe thats the reason?
Also it's probably looking at the main voltage indicator and see's 16.9 and asks you if you want to charge it to 16.8 so It thinks it has to discharge, but on the balance leads it sees less than 16.8.. Does the same happens with empty battery?
![FIX: Balance Port Voltage Match Error - ToolKitRC M6D [Needed to Calibrate Main Output Voltage]](http://i.ytimg.com/vi/8-EUs-9MhFA/mqdefault.jpg)
![FIX: Balance Port Voltage Match Error - ToolKitRC M6D [Needed to Calibrate Main Output Voltage]](/img/tr.png)
UPDATE 9-1-21: THIS ISSUE HAS BEEN SOLVED. SEE THIS VIDEO czcams.com/video/8-EUs-9MhFA/video.html
(Main output voltage needed to be calibrated) Thanks to everyone who commented!
I have two of those and never had any issue with it, amazing charger!
Make a video of you calibrating, I had a similar problem with the 4 channel charger. Be sure you use a good multimeter OR plug in the battery in a charger you know is reading correct values and enter these in the calibration menu
IT IS about the voltage difference between your individual cells and your Main voltage of your xt 60 because your 4 cells With 4.2 volts should add Up to 16,8 v and Not above 17
I get error “ Balance port cells match error” when trying to charge a 1s? I set cell count to 1 already.
Any idea how to fix it?
Your main battery lead voltage is off compared to balance lead total voltage,can you manually input main lead voltage numbers to match balance side?
Many Thanks for sharing this video....
I m having the same problem with my
4CH TOOLKITERC charger, and i couldn't charge any of my batteries,
But know i can...
Hey, You should only calibrated the balance port, just do calibration for main charging port also, problem should be solved.
Hello. there was also such a problem.
Tell me what the company said to you?
Is the charger still working? maybe you already bought a new charger? which model?
Try power it with voltage less than 24 v, do with like 12v. I think i've seen IT when using 24v power adapter
is this only happening to you on full bats ?
try this:
turn battery selection on in settings
this will give you a selection before it starts charging
set bat type to lipo and enter cell count
start cycle with all leads connected
im guessing it is maybe guessing the cellcount wrong somehow and glitches
It seems like your main voltage sensor on XT60 isn't showing the correct value, on 4.2 on each cell it shows 17.08 instead of 16.8, maybe thats the reason?
Also it's probably looking at the main voltage indicator and see's 16.9 and asks you if you want to charge it to 16.8 so It thinks it has to discharge, but on the balance leads it sees less than 16.8.. Does the same happens with empty battery?
I’m having the same problem. Bugs the hell outa me. I bought a new charger to eliminate problems. Now this 😡.
toolkitrc m9 main port disconnected
Have you tried plugging balance lead first then main plug ?
Good question! But yes, and I still get the same result. 🙁
Is there a trick to charge only via balancing port? Thanks
Good question. I'll have to test that out. Maybe someone else can chime in.
@@RCwithAdam1 i tried but if the xt60 connection isnt used, so it says voltage to low.
send this video to there company website or the store you bought it from.. this easy fix they will send you new one maybe
I did. We'll see what they say.
I HAVE DE SAME PROBLEM !!
I KNEW someone would! Let us know if you figure it out!
@@RCwithAdam1 Same here.