Tesla Model Y SPOILER Install!!
Vložit
- čas přidán 15. 04. 2021
- Thanks to Kevin for letting me install the spoiler on his car! Came out great!!
Color Spoiler: www.tesmanian.com/collections...
Carbon Fiber Spoiler: www.tesmanian.com/collections...
Awesomeize Your Tesla @
www.abstractocean.com/?aff=te...
*Use code "teslainventory" for 15% off your first order!
Tesla Referral Code for 1,000 Supercharging miles: ts.la/erik1286
Amazon Shop for Products I Use & Recommend: www.amazon.com/shop/tesla_inv...
Facebook - / teslainventory
Twitter - / teslainventory
Instagram - / erikstrait
FanMail? Email at admin@teslainventory.com or mail to:
Tesla Inventory
PO Box 1233
Morrison, Colorado 80465 - Auta a dopravní prostředky
Great video Eric, the double side adhesive tape liner is designed to be pulled off slowly after you place the spoiler in the final mounting position. There is no need to remove the tape liner before you place it on the trunk. Try pulling it out slowly after you center it, which is 6.5" from the tailgate edge. You just tug at the liner gently so you never have to move the spoiler from its final desired mounting location. Just an FYI !!!
Easily one of the best garages I’ve ever seen! Job well done!
You did an amazing job installing it, looks great on the car. Such a great upgrade with an affordable cost. Goes well with my Tesmanian floor mats too.
I just received and installed my spoiler, thanks to your video and 10% discount. It looks marvelous.
Eric
Thanks for the excellent video and instructions…just installed a matte finish spoiler on our ‘21 MYLR white on white. It really finishes out the look!
Might be getting one for my black Model 3 SR+, great to see this from Erik who has a lot of experience with this..
have to admit that red is 🔥 Though I'm probably getting White because FREE (lol) and then wrapping it in a brighter blue than what Tesla offers... ❤️ The new garage! Great video as always!
Such a great away to install the spoiler!! Thank you 🙏
Red/Black is my color of choice. Erik, your garage is absolutely incredible! I always look forward to your videos!
Thanks!! ❤️
@@TeslaInventory You are so very welcome, Erik! You and David really bring excellent content to our community.
Thanks good video just got the same spoiler for my Model Y looks great!
Great instructional video. The only thing I would add is using either a hairdryer (or heat gun if you have it) around the spoiler after you've put the tape on there to secure it. The heat will help soften up the adhesive and make it adhere better to the car as it cools.
If you really want the spoiler to stay on there rock-solid with no intention of removing it, use some 3M adhesive promoter on the car, then wipe away any excess with isopropyl alcohol.
Great video. Just ordered one for my MY
Thank you. Have a suggestion for you. I used to teach public speaking. Like many CZcams people, you say “go ahead and” over and over in this video. We used to use videos to teach speakers to drop these verbal tics. The great majority did not know they were doing it - as you do over and over in this video. Not being negative or mean, just making you aware of a tic that you have. Again, good video that helped me with my spoiler install.
Thanks buddy , this is absolutely great.
to add. if you have ceramic coat, you should clay that area first to remove the coating. also, look up 3m 4298uv tape primer, or 3m 06396 promotor. it can be applied after an alcohol wipe and helps the 3m tape to stick even better. i bought a "paint pen" style version of the 4298 and applied it to both the carbon fiber wing and car side (i bought a used wing and put on new 3m tape)
That spoiler looks incredible!
Great Video. Love the hexagonal pattern ceiling lights in your garage. Where do you get those from?
Followed your directions. They were PERFECT! Easy as can be, by myself. Took all of 15 minutes. Probably took me longer to find my roll of painters tape than the actual installation! LMAO! THANKS FOR THE GREAT VIDEO!
Thanks!
Thank you for a helpful video !
Thanks! Now I know I can install a spoiler myself.
Great tip thank you for this.
Hey great video. Install was well explained. To confirm, was it the matte black or solid black spoiler that matches exactly to the black trim on the model Y? I want to make sure I purchase the correct colour from Tesmanian before placing my order.
Thanks. I’ve got midnight silver Y. Yeah I think matte black... just ordered with your code plus mattress.
That would look great!
Great Video Erick.
Great video Erik
When my MYLR arrives in a few weeks I'll be doing this right away. Thanks for the great video.
Congrats on the new Tesla! 🥳
U mounted the ramps, nice
Looks great.
Dude, I love your garage lights. Where could I pick something like that up?
Great video. Did you use matte black or solid black?
Thank you for the great video. Although it doesn’t seem to stick on the bottom part.
Getting a follow just for the garage wow
Much thanks. My wife opened the trunk and smacked the liftgate into the garage hinges and scratched the paint. The paint kit was worthless. But I don't see the rear spoiler.
Loving the garage and red MY looks great in it 👍
Yes, that garage is amazing! Great job.
Is that the factory red? That looks way better than on the website and I haven’t a red one in person yet.
Thank you Erik, has it stayed on good and snug for a year?
I have the same spoiler from Tasmenian on my red 2021 MY. It looks fantastic ! Great video Daerik!
How is it holding up on edges? I got red model y and looking to install this spoiler.
Any updates on how it holds up? To car washes?
I bought one from Tasmania and it was terrible. The mold was wavy and looked like crap when I installed it. I took it off and they promised to send a new carbon fiber version when they came out, but I never received it. By the way, you’ll only see 4 and 5 star ratings on Tasmania’s website because they scrub any bad reviews. So don’t trust the reviews and good luck ordering from them.
The quality from Tesmanian is only OK, the fit is not exact.
Was there PPF on that Model Y? And if so, is that suitable for mounting this spoiler?
Wow, gloss/matte - big diff (don't EVER change tho!!)
I noticed that when trying this on the fit is not as intimate as it could be. The left and right edges have a slight separation of 1-2mm. After your install to date has it stayed in place?
Does the spoiler help with all the dirt falling on the back rear around the licence plate?
Spolier for the Spolier (but also lights)
So, the overheads kinda look like a BeeHive, eh? If Tesla/Elon... an Ehive... but for David (been lovin seein more of him lately) & Erik:. Dæ-Hive Lights? :)
Thank you for the video! How did you get/make the awesome supercharger frame?? It’s so cool!
I made it! Check it out here: czcams.com/video/690s62xEE5Q/video.html
Hi, I am planning to put matte Ppf on my Tesla Y long range
Question- would you recommend putting on the fin first? If so should I order the precut PPF for the ‘performance’ model?
I have Xpel on my MY, do you think that will mess with the adhesion?
I have a question. I need to reattach the spoiler, I just bought my tesla it was a lease previously with one owner who took it off for whatever reason. I was told by the dealer to do the same thing you did in the video but just go get more adhesive tape. Would you recommend that?
Is this the solid black color or the matte black? Any suggestions? I want to get one for my white MY. Thanks!
Is there is ceramic coating or a wrap on the car before you add it spoiler
Where can I get those garage lights?
Does the Model Y Performance come with a matte or glossy carbon fiber spoiler?
Damn both black and matte black are pre-order right now.
Is it matt black or glossy?
how does this affect the range?
I thought it was Tesla garage shop you work for, looks so nice 👍
Thanks!
Erik, great video. I had my MY ceramic coated a couple of weeks ago. Do I need to do anything different installing the Tesmanian matte black spoiler? Or just follow your lead in the video?
it needs to be cleaned with a good cleaner...sayyyyyy dawn dish soap...2 times...then alcohol ...then use adhesion promoter.
How is it holding up - Especially on the edges?
How is it holding up ? Mine is slowly lifting up around the corners after a few months
Cool garage! I like the videos, but I ordered this spoiler and the tape wouldn’t make contact on the bottom. The manufacturer website censors reviews. I have attempted two negative reviews of this product, but they only show positive reviews. I closely followed these instructions and ended up peeling the spoiler off because it wobbled up and down since the tape didn’t fully contact. I’ve asked for a refund, but I’ve been ignored.
I tried to follow this video and there is no way you can peel off the 3M protective tape and just put the spoiler in place, absolutely no way. As soon as any one point of the spoiler touches the car it sticks making any adjustment impossible. There is another video showing the spoiler being pressed into place and only then the 3M backing is slowly removed.
I think the best way is to cut the backing in the middle, so you can start from the center, with 15cm, and work your way outwards both ways. That’s the way the OEM spoiler is as well.
Can I get a link for the spoiler?
Does anyone know if it can withstand going thru automatic car wash?
Does the car have ppf, is it ok to put it on top of ppf?
It's official. I have garage envy.
How did you make your t logo black? Plastidip?
how does this affect power consumption?
Is that matte black or just black?
What model / company is the spoiler?
want to see after a month or so how the adhesive/glue holds-lots of owners have spoilers glue not sticking good after a while.
Has it held up?
I bought one and it doesn’t quite fit and it’s lifting on the outside edges. I noticed before I stuck it on and tried to position it so it would fit but it was still raised on the ends.
I prefer the black spoiler too bro 😎 looks good 👍
Which black? Matte black or solid black?!
matte black bro
Just to clarify, was this the Solid or Matte Black?
Have you guys heard anything? About when the refreshed Model X will start being delivered. Mine is saying April.
No. Very sad about it.
The Link was misspelled ?
Is this the Matte Black or Solid black?
I'm amazed that the adhesive tape will hold this on the car. i would fear this would fall off in heavy wind and rain conditions or maybe a high pressure car wash.
Does the OEM Tesla spoiler install the same way?
OEM installs in the same manner. Same with other car manufacturers. Automotive double sided tape is strong stuff!
So it goes on like on the 3.
The red is very striking in person.
I bought one and it looked like crap.
How does it do in a carwash?
Make sure not to use rubbing alcohol because rubbing alcohol contains glycerin
yeah, I always use an isopropyl.
@@erikstrait8191 lol. Was logged in under my personal account instead of the DÆrik account. Opps!
They door trim on the passengers drivers side is off! Alignment....
this is ABS plastic with carbon fiber Matt on top surface! In China this only cost you 20-30 USD in retail, real 100% carbon fiber spoiler in China will cost you about $100 USD
I bought one in China and pay 100 dolllars for ocean shipping due to the size, but if you are buying 10 of spoiler from China. Shipping cost still $100 dollars due to dimension weight applied…
Hey Eric, if I was to install a spoiler like that what would be the best way to remove it ? Heat gun and some alcohol to wipe away the adhesive?
Yeah, for removal I'd just sit it in the sun to warm the adhesive. Using a heat gun or hair dryer to heat it up would also help. Then use some thin spudger tools to get under a corner and work you way until you can grab it. Heat is your friend to soften up the adhesive. Alcohol will help remove any extra stuck adhesive.
Why don’t you use a gun heat to heat the glue.
I like it on the y but I’m getting a cyber truck so there is no Space for a spoiler 🤣😂🤣
How many people are installing the spoiler? That red does look great.
I've heard of quite a few. The spoiler definitely makes the back end look more complete IMO.
But can you tell us how to setup our GARAGE like that? Wifey can have the rest of the house, I just want that garage
Franz - These Stans deserve your John Hancock....eh?t
Wait did he paint his garage tesla
I wonder how this spoiler is holding up after a year. It seems like a lot of the reviews say the edges are separating from the trunk so I'm hesitant to install it.
Great question.
My already starting lifting up around the edges and I did everything right. I have the hansshow
the separation on the edge is happening on the oem versions as it seems they did not have tape all the way to the edge which is clearly not the case on this one.
🚨 SPOILER ALERT! 🚨
Lol
Sorry, couldn’t resist 😁
@@TomsTurboGarage love it!
Red is so beautiful! I am so tired of Tesla’s white.
I wish someone made one with an Integral brake light.
they do!!!
@@SylvesterPotter who is “they” ?
What if I have ceramic coat can I still put this on?
My car is ceramic coated and it is no issue with it adhering.
@@SnowManson sweet. Did you have to remove anything or just applied it as is?
@@88omarz that is my car in the video. Nothing special had to be done for the ceramic coat other than what Erik shows. Congrats on getting it coated, definitely makes a big difference I think.
@@SnowManson awesome! Thanks man. Yea I’ve always coated my cars. Makes cleaning much easier combined with ppf it’s a winning combo. Love the red btw. I lowered my y because I didn’t like the wheel gap and harsh ride. Def a worthy upgrade too.
How
How is the rear spoiler after one year?
Following
@@gimmieboy I installed the tesmanian carbon fiber spoiler on my wrapped model Y. One month so issues, no issues on high wind highways. My front lip did mysteriously break off during the drive home from tesla takeover. I was sent a replacement so I’ll try to enforce this one myself.
No issues.
I OWN A TESLA AND WOULD LIKE A TOWING BRACKET SO I CAN GET SAND CEMENT GRAVEL, AND SECOND HAND BOILERS IS THIS POSSIBLE, OR SHOULD I EXCHANGE IT FOR A TOYOTA COROLLA
Toth can get a hitch from Tesla or Uhaul
15% code does not work.
Do NOT follow these instructions unless you want a spoiler that comes off (as the majority does because wrong installation.)
Search for Tesla Bjorn Spoiler on CZcams and follow the instructions there.
Avoid buying any items from Chinese seller TMA Plus , they ship fake and damaged items. Terrible customer service, no resolution to issues.. I will never do business with them again..