I'm guessing you missed him using a ratchet-strap to pull his last fix,and using the PICK side of a body hammer on a Flat surface,instead of his frame machine parts and a hammer and dolly??I think a 150K truck needs Yuri and Nate so it'll drive straight again.
@@bryduhbikeguy I'm guessing you must have conveniently missed Ben having to help with the rolled over Lamborghini Urus and the rolled over Porsche 911.
Spray foam insulate the container before you put those plastic MB parts in the container. It literally gets hotter then a sauna in there in the summer and can warp those parts. 🙏
Yeah cuz it probably will melt some of them pieces how hot it gets in there it'll probably get close to 190 degrees and there.. so either go to harbor freight and get the fan with the electrical that connects to the solar panel and have a fan sucking too hot air out or spray foam it
@@jerrywilcox9890If you think they just got it after working 4 times with him then think it twice. Framework is not bondo and paint....you need to put in hours to know where, how and how much to pull. Vtuned and his brothers been doing this on their shop for years. Ultimately, this car will end up either given away or sold, either case it needs to be 100% right otherwise it might become a future liability.
If you put your new shipping container against the shop wall and the container, you can cut a doorway between the 2 then you have access from inside and won’t have to take stuff out in the weather for storage. Just an idea for y’all
If only one could! Land of the free doesn’t allow stuff like that unfortunately. Attached dwelling, need permits. Once it’s “attached” to the garage it changes everything 🫤
I totally agree with many other comments. You guys get much love from your community as you routinely involve your dad with your work and it demonstrates the love and respect you have for him and family in general.
You have to ventalte those containers, they become so hot and humid everything gets mouldy and warps. Insulate it, get a whirly bird thing for the roof and weather proof it.
In case anyone is curious, the boys paid $94k for that G-Wagon, if they can fix it for around $30k i say they got a fantastic deal, clean title and similar spec, year and even with more miles G-Wagons are selling for over $200k, i know they will never get 200K out of this one but they got it for a good price! Can't wait to see it finished!
Since I'm not there to look closer but I've had the best luck lining up a roll like that by internally pressing from the passenger floor to the driver to corner as it will bring the walls over at the same time then straighten with bracing as needed. Just a thought.
100%! I just commented explaining the push over pull method...and I wish they would atleast get measurements printed off and get a good quality tram. Ultimately a laser measure system or spansi but atleast tram and measurements instead of pull to fit....ugh..lol
Dehumidifier and desiccant will help keeping parts in pristine condition. Humidity in Tennessee could affect them long term. But hoping you guys have a quick turn around on this build! Keep up on the awesome content 👍🏼
Guys, you are great fellows! Your project is indeed very complex and, for obvious reasons, inaccessible to many. But, thanks to you, many will learn for themselves that there is no limit to perfection and there is much to strive for! Thank you! hello from Kyrgyzstan
Can tell pops loves holding onto things cause he's the definition of self made, it's hard to let go of things when you know that being like that, is what's gotten you to where you are, glad you boys retired him smoothly 💯
You guys should definitely make this a 4x4 squared. They are very rare and very cool. They have portal gear lifts and all sorts of carbon fiber parts. Would be a great addition to this g wagon! They make full kits to turn it into a 4x4 squared.
You guys doing amazing job and pops does a amazing helping you guys out on the builds and he goes out of his way to get stuff for you guys when you guys need it for your build keep up the amazing work.
You guys are building my dream SUV! Thanks for always inspiring, I started a second channel devoted to cars largely because of you both. I also hope this car goes to pops, he deserves to ride in style with those shades! 😎
Im sure you guys know, but make sure that containter is really secure. We’ve done projects in the past and at night people will just crank on the doors until those locks snap - even the pricey ones. Don’t wanna lose those parts!
True, years back we stored valuable Air Craft spares at mission area (deployment) and ran into such issues and rust on steel objects. We had to run A/C on it
Another part of goonzqad history gone forever R.I.P. Bertha. Guess you have to be brutal. How's about another shipping container added as a paint room, you need one to do all your mixing. There's always something to buy, onwards and upwards. Great vids guys as always, many thanks.
Wow you boys are so talented and not afraid to tackle big projects. I love your relationship with each other and also with your dad. It cheers me up watching your channel. Well done and thank you. Keep up the good work 🫶❤️❤️❤️
That is an amazing frame machine they probably have a way to lower the whole machine. Thought of something while get a brabus type of wide flares kit that would be good for a wider stance and tires making a more stable ride.
Love the G Wagon. The only lift kit I would recommend is the Portal axels. Basically it would turn into the G square. Engines are also quite easy to tune and get tons of power.
Guys great idea with the shipping container. But just bare in mind those things get super hot maybe consider getting the container climate controlled just to protect the storage you never know how long something will be in there. Good Job Squad!!!
Well there goes big Bertha guys I remember you fellas doing so much stuff with that machine man, I remember it was leaking hydraulic fluid loosing power but still got most of the things you needed it for done man, in sure you guys will get your selfs a new big Bertha lol! 💯👌👍
Dear Bros, The Mercedes G60 is in good hands with you guys. I’m fully confident that you will let her look like a brand new one what also will follow the driving specifications as a new one. I look forward to your next vlog and send you love from the Netherlands
I miss and wish their unleashed/podcast channel would have become more. Them telling stories in their parents garage and the one everyone was anticipating when they revealed their real names. They even had a hard time telling a story about a time they disagreed or argued. I wonder that count now, how often and the situations. Bring back the unleashed channel, the awkwardness and struggles to be themselves unedited made those few videos and that channel great.
Pops has such a fun time working with Simeone and Eleazar. Peeking behind boxes and pulling Eleazar's leg, literally! :D It's amazing how fast this Gwagon is coming apart.
Definitely think you guys should consider getting one of those huge sheds that has double garage doors on each end with a side a door. and it’s like a nice addition to the property. And perfect place to store 3 or 4 builds.
Cars are designed to crash, but only once. In most places when the crash safety structure is compromised like this the vehicle can never be registered again.
Loving this so far! The extra care to store the parts will pay off....one thing though: bubble wrap! Ideally you'd wrap up all the parts in the bins so they don't scuff each other! Also, keep in mind the new shipping container might if not equipped with HVAC might make the contents moldy pretty quick if the weather changes!
You need to buy a mini barn to store your parts in, much nicer looking then a shipping container and they are not a bad price! I deliver them for a living
There usually some underlying issues that you might not see. I have faith in both of you and your father. All of you have been doing amazing work. Enjoying your channel and content keep up the awesome work - video's.
Between both you Simon and you Billy you should make a covered carport that you can park 7 cars. Kinda like storage facilities have. One site at Simon's house the other at Billy's house. It will free up space and when you want to sell or do giveaways you can do it over there or at the garage. Freeing up space at the garage. There is a company that does shelving that has steering wheel to move from left to right In a group. To store parts. The boats put them in a dry dock and when you need it call them up and have the boat on standby.
It blows me away how these guys take complicated stuff apart without breaking it. But what really blows my mind is that they can put it back together again. How do they remember what goes where?
I would love to see a "how to" series from you guys. Like what tools you need and what's the best body filler for certain jobs etc. It wouldn't cost anything but it would be so valuable to us :)
I think it would be great if you spent more time organizing your garage. Maybe hanging tools and stuff on the walls. I am so organized because of hanging things on the walls instead of just building up on a shelf.
Pops is such great guy. Im glad you guys made him part of your content. Love seeing him around getting involved with things all around
Agreed! I was literally thinking the same! He is an awesome part of the team and Always taking care of things behind the scenes too!
Pops is the MVP..
New teeth?
Looking good
Pops rules!
Pops for president 🎉
Better called V-Tuned for this one. Might have some underlying issues that you aren't seeing.Ben will know what to look for.
I agree
I'm sure they've got him on speed dial.
even if vtune isnt really needed. its just nice to see him around with the build..
I'm guessing you missed him using a ratchet-strap to pull his last fix,and using the PICK side of a body hammer on a Flat surface,instead of his frame machine parts and a hammer and dolly??I think a 150K truck needs Yuri and Nate so it'll drive straight again.
@@bryduhbikeguy I'm guessing you must have conveniently missed Ben having to help with the rolled over Lamborghini Urus and the rolled over Porsche 911.
Spray foam insulate the container before you put those plastic MB parts in the container. It literally gets hotter then a sauna in there in the summer and can warp those parts. 🙏
I was gonna comment the same thing!!!
Yeah cuz it probably will melt some of them pieces how hot it gets in there it'll probably get close to 190 degrees and there.. so either go to harbor freight and get the fan with the electrical that connects to the solar panel and have a fan sucking too hot air out or spray foam it
I believe the fan at harbor freight is like 70 bucks with a solar panel
I second this!
They're not going to listen. Replacing those parts will be future content.
Bye Big Bertha. You would be miss. One of the greatest characters of the channel
The G wagon should definitely be given to pops for all his work and running errands for you guys and behind the scenes. He deserves it !
@goonzquad..lol
It's time to call V-Tuned, awesome guys! Keep it going!!
They can get it on there own.they don't need him they need to learn to do it on there own.
Fr wanted done, right they need to call v tuned
@@ochikas6317 no they need to do it on there own.
@@jerrywilcox9890If you think they just got it after working 4 times with him then think it twice. Framework is not bondo and paint....you need to put in hours to know where, how and how much to pull. Vtuned and his brothers been doing this on their shop for years.
Ultimately, this car will end up either given away or sold, either case it needs to be 100% right otherwise it might become a future liability.
I hope V-Tuned and Goonzquad are in good terms. We need him in this build
I can visualize your dad driving the G-wagon like a boss around town… I hope you’ll give it to him
100% for his wife
@@networkcrasherthe urus took too long so now she’s onto the merc
@@camisfam405 you mean the the rsq8 with a body kit? 😀
These guys don't give anything away remember their brother and the Hurracan? Tight as fishes arses
5 REPLIES
Pops gives the channel such a great family depth
Pops' smile is looking fabulous these days. So long Big Bertha. Haha.
Time to get vTuned over there. He is the frame expert.
Time to get v Tuned over there.
They need to learn to do it on there own.
@@jerrywilcox9890just like the electric, right?
@@sinister184 who cares about the electric lol.its working.
@@sinister184 they can handle it they don't need vtune for anything.
If you put your new shipping container against the shop wall and the container, you can cut a doorway between the 2 then you have access from inside and won’t have to take stuff out in the weather for storage. Just an idea for y’all
If only one could! Land of the free doesn’t allow stuff like that unfortunately. Attached dwelling, need permits. Once it’s “attached” to the garage it changes everything 🫤
@@crappyfrs302 leave a small gap and have 2 doors then, makes it easy to run power for lighting as well
Awesome thanks
@@crappyfrs302 you
I totally agree with many other comments. You guys get much love from your community as you routinely involve your dad with your work and it demonstrates the love and respect you have for him and family in general.
Really enjoying the program guys. I miss seeing your moms smiling face as she brings you guys lunch.
Keep up the good work.
You have to ventalte those containers, they become so hot and humid everything gets mouldy and warps. Insulate it, get a whirly bird thing for the roof and weather proof it.
You guys are so luckey to have your dad with you and helping yous. So Awesome. Enjoy your time with him. 😊😊
In case anyone is curious, the boys paid $94k for that G-Wagon, if they can fix it for around $30k i say they got a fantastic deal, clean title and similar spec, year and even with more miles G-Wagons are selling for over $200k, i know they will never get 200K out of this one but they got it for a good price! Can't wait to see it finished!
Even at 50 k. It's a Awesome deal and yous know they will do it right
@@allanstephenson9336 Or it could end up in the corner with the Porshe !!
Jeez really? would you pay $130+ for a bodged repaired G waggon? 😮
At 300+ new. At say 150. You got a Awesome deal !! Half price and low mileage.
Are you going to post this same thing on every video loser?
Since I'm not there to look closer but I've had the best luck lining up a roll like that by internally pressing from the passenger floor to the driver to corner as it will bring the walls over at the same time then straighten with bracing as needed. Just a thought.
100%! I just commented explaining the push over pull method...and I wish they would atleast get measurements printed off and get a good quality tram. Ultimately a laser measure system or spansi but atleast tram and measurements instead of pull to fit....ugh..lol
Who else was just waiting for that notification?🙋🏼♂️
I was fr
Me
Me
Not me
@@scottsaalman6106but you’re still here I wonder why 🤷♂️😂
Love it keep it going no lift kit please no oversize wheels and tires. Just restore it and make it nice.
Spot on crappy mods just ruin good cars 🤔
G Wagon design goes back to the 70's as a military vehicle so that why it has to be simple and easy to re-assemble
Dehumidifier and desiccant will help keeping parts in pristine condition. Humidity in Tennessee could affect them long term. But hoping you guys have a quick turn around on this build! Keep up on the awesome content 👍🏼
Give pops that g-wagon!❤
Elazar "lets hold off taking the damaged parts off so we can just swap them for the new parts when they come in " Starts ripping the Wagon to bit's 🤣🤣
Glad to see them finally doing a build with some professionalism
For others...look for "food grade" containers. They are generally the very cleanest but will cost more
Guys, you are great fellows! Your project is indeed very complex and, for obvious reasons, inaccessible to many. But, thanks to you, many will learn for themselves that there is no limit to perfection and there is much to strive for! Thank you! hello from Kyrgyzstan
I'm digging this rebuild!
Let’s go! Always cool seeing the guys take advice from the viewers! Shipping container is the way to go!
I'm going to miss that old forklift. I wanted a rebuild on that when you got it
Go Pops, Go Pops!
1. Goonzquad & Pops
2. Dang Sons & Pops
3. Pops & Sons
Peace from Florida!
there were some great bits from your dad in today's video. what a guy :) you boys are so lucky to be able to work with your dad.
I would love to see the walls above the metal all decorated! Kinda bring in the vibes of the old shop.
I’m so so glad that you guys are uploading regularly again! Thankyou from us all 🙏🏼
Can tell pops loves holding onto things cause he's the definition of self made, it's hard to let go of things when you know that being like that, is what's gotten you to where you are, glad you boys retired him smoothly 💯
Love y’all videos definitely gave me motivation on my third copart rebuild and CZcams self taught bodywork and paint ☝️
You guys should definitely make this a 4x4 squared. They are very rare and very cool. They have portal gear lifts and all sorts of carbon fiber parts. Would be a great addition to this g wagon! They make full kits to turn it into a 4x4 squared.
Nah that would just ruin a nice rebuild.
You gentlemen are doing an awesome job. Keep up the good work can't wait till the next 1 video.
You guys doing amazing job and pops does a amazing helping you guys out on the builds and he goes out of his way to get stuff for you guys when you guys need it for your build keep up the amazing work.
You guys are building my dream SUV! Thanks for always inspiring, I started a second channel devoted to cars largely because of you both. I also hope this car goes to pops, he deserves to ride in style with those shades! 😎
You can see the enjoyment in pops eyes when helping y'all out. Get R Done brothers
Amazing guys 👍 I hope you guys do a sick color on this build 🔥
Unless they are totally stripping it including the engine out it can only stay grey.
Im sure you guys know, but make sure that containter is really secure. We’ve done projects in the past and at night people will just crank on the doors until those locks snap - even the pricey ones. Don’t wanna lose those parts!
Love y’all guys videos !!!
You'll need to pad it for the heat/ cold/ moisture... cause they DO leak over time and they DO hold a lot of heat. Not good for the sensitive stuff.
True, years back we stored valuable Air Craft spares at mission area (deployment) and ran into such issues and rust on steel objects. We had to run A/C on it
You guys are great people your mom, your dad and you guys! Just can tell how down to earth you all are.
*Excellent man, thank you for sharing your work, God bless you*
So glad you two decided to give pops the G-Wagon!
Build a shelf just for car parts when you tear them down each build. 👍🏼
Another part of goonzqad history gone forever R.I.P. Bertha. Guess you have to be brutal. How's about another shipping container added as a paint room, you need one to do all your mixing. There's always something to buy, onwards and upwards. Great vids guys as always, many thanks.
Wow you boys are so talented and not afraid to tackle big projects. I love your relationship with each other and also with your dad. It cheers me up watching your channel. Well done and thank you. Keep up the good work 🫶❤️❤️❤️
just got my package you guys are dope thanks for the tools
That is an amazing frame machine they probably have a way to lower the whole machine. Thought of something while get a brabus type of wide flares kit that would be good for a wider stance and tires making a more stable ride.
Thanks for the antenna. It had some chipped paint, but, let’s be honest, not the first chip on my Jeep 😅
I just love Pops. Great Dad to have around. oh my his smile is just infectious.
Love the G Wagon. The only lift kit I would recommend is the Portal axels. Basically it would turn into the G square.
Engines are also quite easy to tune and get tons of power.
Would love to see you guys go all out on the stitching in the seats, dash and seat belts
Can’t wait for the ceramic detailer!
Cool 😎 . Let’s go again Goonzquad on another fun build !
Guys great idea with the shipping container. But just bare in mind those things get super hot maybe consider getting the container climate controlled just to protect the storage you never know how long something will be in there. Good Job Squad!!!
you should do an episode with your vendors. ie go to the shop where they re skin the leather.. or show how they make the custom wheels..
Well there goes big Bertha guys I remember you fellas doing so much stuff with that machine man, I remember it was leaking hydraulic fluid loosing power but still got most of the things you needed it for done man, in sure you guys will get your selfs a new big Bertha lol! 💯👌👍
This was a quality old school vibe video fellas, more like this.
Dear Bros,
The Mercedes G60 is in good hands with you guys. I’m fully confident that you will let her look like a brand new one what also will follow the driving specifications as a new one. I look forward to your next vlog and send you love from the Netherlands
I miss and wish their unleashed/podcast channel would have become more. Them telling stories in their parents garage and the one everyone was anticipating when they revealed their real names. They even had a hard time telling a story about a time they disagreed or argued. I wonder that count now, how often and the situations. Bring back the unleashed channel, the awkwardness and struggles to be themselves unedited made those few videos and that channel great.
Hell they dont even do their normal 3 video's a week anymore ! Cut back to 2 , so obviously dont want to do the unleashed anymore !
Maybe you guys could use some warehouse type shelving.
Sooo glad that at last you’re working on a Mercedes! Look forward to see you’re next videos on the G!
Always Excited for a new video keep up the great content 👍
Guys.. at this rate, you may need several shipping containers side by side, one on the other… maybe 4 off. Build shelves for storage
Hell Yeah!!!! Cant wait for yall to get the G-WAGON all fixed up!!!!
You guys are awesome keep up the good work guys much luv from Maryland
Pops has such a fun time working with Simeone and Eleazar. Peeking behind boxes and pulling Eleazar's leg, literally! :D
It's amazing how fast this Gwagon is coming apart.
Bye Big Bertha, sad to see you go. Can't wait till you finish the G63 G Wagon.
the more of these you do the better you get at it - not as simple as it looks
Coming along well And You were CRAZY for JUNKING THAT FORKLIFT
No worries v-tunes will save the day thanks Goonzquad it’s gonna be another amazing colab with the frame man
Definitely think you guys should consider getting one of those huge sheds that has double garage doors on each end with a side a door. and it’s like a nice addition to the property. And perfect place to store 3 or 4 builds.
With the shipping container you can put shelving for more storage space
Just build another small shop next to the paint booth for storage, you guys have the room for it!
😮😮😮😮😮 that truck is ready to drive already
keep up the amazing work love yalls videos keep doing what yall do great work!
Cars are designed to crash, but only once.
In most places when the crash safety structure is compromised like this the vehicle can never be registered again.
Really enjoy your videos guys keep up the good work
Pop’s english has improved so much!
Go guys should get rollimg shelves so you can keep parts from the same section a car together and move them around easier
This build needs to be a gift to Paps! Ukrainian gangster 😂
To my favorite CZcams channel, I love you all, guys, and I love your positive vibes
Loving this so far! The extra care to store the parts will pay off....one thing though: bubble wrap! Ideally you'd wrap up all the parts in the bins so they don't scuff each other! Also, keep in mind the new shipping container might if not equipped with HVAC might make the contents moldy pretty quick if the weather changes!
I’m surprised pops didn’t separate out the metals from the forklift
Love your work young men
I open up the yt app and this the first vid. LOVE TO SEE IT‼️‼️‼️🔥
God bless you, pop.. moving on it's part of life..
You need to buy a mini barn to store your parts in, much nicer looking then a shipping container and they are not a bad price! I deliver them for a living
They did have a mini barn. They don't show it anymore because it likely sliding down the hill by now.
Sebagai penonton dari indonesia, saya berharap ada subtitle inggris / indonesia,
Karena saya menunggu video2 dri kalian,
Kerja yg bagus 😊❤
This build is so sick en it's such a vibe.
Much love from Uganda 🇺🇬
There usually some underlying issues that you might not see. I have faith in both of you and your father. All of you have been doing amazing work. Enjoying your channel and content keep up the awesome work - video's.
LET'S GO GOONZQUAD !
Between both you Simon and you Billy you should make a covered carport that you can park 7 cars. Kinda like storage facilities have. One site at Simon's house the other at Billy's house. It will free up space and when you want to sell or do giveaways you can do it over there or at the garage. Freeing up space at the garage. There is a company that does shelving that has steering wheel to move from left to right In a group. To store parts. The boats put them in a dry dock and when you need it call them up and have the boat on standby.
It blows me away how these guys take complicated stuff apart without breaking it. But what really blows my mind is that they can put it back together again. How do they remember what goes where?
I would love to see a "how to" series from you guys. Like what tools you need and what's the best body filler for certain jobs etc. It wouldn't cost anything but it would be so valuable to us :)
I think it would be great if you spent more time organizing your garage. Maybe hanging tools and stuff on the walls.
I am so organized because of hanging things on the walls instead of just building up on a shelf.