Dutch pins fantastic tool , if you put a little spacer behind the profile ( like a weep hole ) you can put your line behind it and you have an corner you can pull off straight away. Great content mate.
Theres some really flash cocky bricklayers on CZcams. These guys are different and so much more on a level. I really think this channel could do well with your grounded characters. All the best boys
We have something similar to a dutch pin in a joiners workshop, there're called hold fasts and they work on the same principle except they have a dedicated hole in the bench top.
Ive got a few dutch pins i always struggle to get them to hold the profile in place. The "leaf" just doesnt seem to wanna hold tight any1 else have this problem? Any tips? Those mortar spikes tho are brilliant for internals so simple 👌
I must grab onto a few of them buckets 🪣 have you tried the hoof proof buckets? They are very felxi and take a good battering 🤘 keep up the good work mate 👍
Dutch pins fantastic tool , if you put a little spacer behind the profile ( like a weep hole ) you can put your line behind it and you have an corner you can pull off straight away.
Great content mate.
👍thank you Dylan
Theres some really flash cocky bricklayers on CZcams. These guys are different and so much more on a level. I really think this channel could do well with your grounded characters. All the best boys
Thanks for that Ben
@@althetrowel keep being you Al. My mrs even watches you, and she never listens to me when i talk sh#t about bricklaying.
@@benkennedy7643 😂😂😂
Nice one. Iv been using dutch pins on internal corners aswell
They are good Ken, we use them regularly
We have something similar to a dutch pin in a joiners workshop, there're called hold fasts and they work on the same principle except they have a dedicated hole in the bench top.
I’ve seen them👍
Love this bloke got his boys trousers on and his dad's kardi and a hair cut done by a bloke on the council hahaha ,,your a star mate don't stop ,,
Don’t like the hair then
T clamps are good for internal corners, you just need to carry round an angle grinder with a big mortar rake on it
👍
I agree mate .what do you use to space your box section off the wall with ?
Weep hole , battern anything really
Where do you get the rhino pins from and what code pls mate
Trowel 10 is the code rhinobuild is the shop
Did you buy those bottoms?
👍
Ive got a few dutch pins i always struggle to get them to hold the profile in place. The "leaf" just doesnt seem to wanna hold tight any1 else have this problem? Any tips?
Those mortar spikes tho are brilliant for internals so simple 👌
He didn't do it, but I usually drive it in a bit more once iv got the leafy bit in position
I always use a little packer between the “leaf” and the profile it always grabs better.
@tomyoung7302 ill give that a try 👍
I'm having a hard time understanding the fn bond, measure first.
😂😂👍
👍
I must grab onto a few of them buckets 🪣 have you tried the hoof proof buckets? They are very felxi and take a good battering 🤘 keep up the good work mate 👍
Yes I’ve had those buckets, but these are different gravy