Doc Ock & Aunt May Marvel Spiderman Unboxing & Review!
Vložit
- čas přidán 25. 07. 2024
- Doc Ock & Aunt May Marvel Spiderman Unboxing & Review!
For All Your WWE Wrestling Figure Needs Make Sure You Visit www.ringsidecollectibles.com/ and Use Discount Code KYLE to save 10%!
Patreon! / kylepeterson33
Pick up your very own See You Later! T Shirt and Support that Channel at:
www.prowrestlingtees.com/kylep...
For All Your Action Figure Needs and to Support the Chanel Use Entertainment Earth! Use My Link to Save 10% + Free Shipping over $59 ee.toys/KYLE or Use Discount Code KYLE
For All Your Action Figure Needs and to support the channel use Big Bad Toy Store! bit.ly/3unKhPH
For All Your Action Figure Needs hit up DJC Collectibles! Use Discount Code 8offDJC to save 8%! www.djccollectibles.ca/
Intro Warrior Animation via @battle_stories_
If you would like to send me something to Review send it to me at:
Attention Kyle Peterson
2205 SE Creekview Drive
Ankeny, Iowa 50021
Don't Forget to Like Comment and Subscribe to the channel!
Patreon / kylepeterson33
Don’t Forget To Follow Me on Social Media
Twitter @Sirpaul64
Instagram the_kyle_peterson
#spiderman #hasbro #marvellegends #marvel
Ive done a little surgery to his backpack and have gotten these in. I seemed to have had excess plastic in 3 of the 4 holes. I heated it up and pushed a pen cover in for more room
Maybe glue Kyle?
I didn’t have any excess plastic in any of the holes on the backpack and the tentacle don’t wanna stay at all 😢
At least you were able to fix your Doc Ock. That sucks you got a defective one, but at least you were able to get it fixed.
That’s a lot of extra work for something that should’ve easily attached. But sometimes hasbro gonna hasbro. Glad you got them in - it makes a huge difference
You can try and super glue the tentacles in the holes of the figure
I can no longer unsee Linda McMahon. This will now forever be known as the Aunt Linda (or Linda Mae) action figure.
It won't with most people
Oh man. I was so looking forward to this doc ock. Good thing you had other docs
I had the same problem with the tentacles but I finally realized that I didn’t push it in all the way.
That's exactly what happened to me and then I went for broke and shoved it in harder and problem solved
Got mine last week. Haven't had any issues with putting the arms in. The only problem I've had is getting him to stand on them. I see a lot of people being able to do it and mine just won't, but I'm gonna keep trying. Figure is awesome and no way he should be in the top 10 worst for this year.
What is your top 10 worst of the year?
Had the same issue, but they will click in and don't fall out.
Push until you get it to click in
Your frustration with Doc Ock was palpable.
I had a chuckle when you were talking about old ladies and short hair because for some reason I had that exact same thought earlier today. Prior to watching this video.
Also when you mention green and gold, to me they're the colours of Australia 😊
I have fond memories of the ToyBiz Doc Ock figure because I found it in a toy store when we were on a family holiday.
I couldn’t do it a first too. I ended up making the tentacles straight to give you the most momentum to stick them in . The bottom two were easier I had to use force with the tentacles straighter at least where your putting in the pressure.
Great video!! 🤙 btw saw you at des Moines comic-con. Was gonna say high but you were socializing in one of the tighter lanes!!🤷♂️
"Aunt May needs a deeper hole " 😮😮😂😂🎉
Sadly it might come down to super gluing the tentacles onto the Doc. At least they stay in the figure, then bend them to suit the look you're looking for.
I had the same issues with the tentacles but it’s a pretty easy fix or not even a fix but more, so how you actually are supposed to do it you just have to press really hard in and it’ll pop in there. You don’t necessarily hear a click but it’ll become firm. You can’t lightly put it in there. You have to really press it in there, so it sucks but they do fit you just have to use some strength.
Read pinned comment
I had a lot of trouble getting them to fit in the original Doc. I ended up having to dremel grooves into the sockets to get them to “lock” in.
It’s definitely a cool set an series! I’m still debating whether I want to get it 🤔
Even when pushed in properly Doc Ocs tentacles are too heavy to be supported by the joint - Makes it awkward to pose and they'll keep moving over time. They REALLY should have locked in place better.
I added a tiiiiiny tiiiny bit of superglue just to keep them in place and it makes a whole world of difference.
Funny that Aunt May in The Animated Series was supposedly in her 50's, and Marissa Tomei was 52 when she appeared in Civil War 😂
12:10 Glad he mentioned "foot" at the end of that one. 😅
Tentacles just fall down. I'll make my own custom.......AGAIN!
I cannot get him or May to stand without sticky tack.
My doc ock's tentacles stat in just fine and has been holding him up for 2 days now. I would recommend!
My tentacles fit perfectly. Had to push them in securely but it can even stand up on the tentacles in the classic doc ock pose on them. It is exactly what i hoped it would be. Maybe yours is just defective
Oh man....I was waiting for an
F bomb. Not that you wouldn't edit it out. But I think we were close. Lol. Too bad the QC issues are seemingly never-ending with the Legends line. So many varying defects that keep coming right alongside the ever-growing prices.
I had to hear mine up and once I did, it does click in place, but you have to give it he man strength
Glad you found a solution for the tentacles but that shouldn't happen. I was tempted by this set to finally have an Aunt May figure, and while I watched this show, I need my Aunt May with gray hair like in the comics. She does look like Linda McMahon. This video reminded me that I'll never grow up. Still laughing at Aunt May not having a deep hole.
They push in fine for me abd hold balance very well
I think they’re awesome figures! My doc ock arms fit fine, just gotta push em in good! Gotta use some elbow grease!
lol "She doesn't have the deepest of holes" (Bevis and Butt-head laugh) I'm sorry my mind went to a very bad place with that. But it did make me laugh.
Which one is the 2nd doc ock?
Aunt May kind of looks like a Kenner Egon.
😂
Mine were fine. I think it was due to irony honestly. I stuck the OG Hasbro tentacles in first just to see this Ock with them. Then tried the new ones on the old version. I'm just miffed Hasbro lied when saying the tentacles are compatible with previous versions. These so not work well with the first version of Ock. The good news is I think because of sticking the larger tentacles first in made putting the tentacles go in easier.
Unless of course, they work better on the "middle" child Ock?
Mine just arrived yesterday..after just seeing the thumbnail I don't know if I'm gonna open this lol
Got REALLY PUSH them bassads in HARD!🤔...she said joke?..lol..No, but really, almost every dang review I've seen its the same..gotta push em. Thanks for the video Kyle! 🤘🏼👍🏼😎
Linda McMahon is an insane comparison 😂
I feel bad because I always find your frustration so amusing.
Just got mine yesterday I had to make sure that my figs were good cause when I got spider-man and carnage spider-man had a upside-down spider symbol on his back but Hasbro sent me a new 2pack
12:40 omg that shit happens on mine to😂😂😂The only way is to glue them!
Just wet the peg slightly. They snap right in. Really enjoy your reviews!
I just got mine and I had the exact same issues with the tentacles they would fall out very easy at first, but I just really put a lot of force into sticking them in and they popped right in and haven’t fallen out since. I think you just need to really push and force them in there hard and they should be fine
You do I has the same issue and fix as you did
Choose your own tentacle adventure 😂
Here we go. Meltdown 😂
I can't wait for the day Kyle "See you later's" the parchment paper a little too hard at the camera and it just falls 😂
Happened a few times already
@@KylePeterson1980 😆 that's pretty funny actually 😅
I had to really press the tentacles in to get them in there. But they are in now. Sorry yours are not staying in.
My tentacles are still in , even after a fall off a table
I hate to say it but Hasbro can be really embarrassing sometimes when it comes to QC. I collect the Star Wars retro line and every single series 1 character who holds a blaster doesn’t hold it well. Han Solo hardly holds it at all, he barely holds it at the cartridge. what’s truly brutal is they realized this was an issue with the initial retail run, fixed it for the later series, then re-released series 1 as a box set with the same issues.
Really sucks you got defective one I opened mine and The pegs went right in and he could hold up 2 Spider-Men without falling down.
You have to push the tentacles until you hear em click in. Maybe yours are defective tho
Hahaha this is totally Linda McMahon. I couldn't put my finger on who I thought she looked like for hours yesterday.
You just have to really push them in hard. Same thing happened to me. But if you push them in hard enough you'll hear the snap and it locks right in
I tried
@@KylePeterson1980 Not just the peg, the whole leg goes inside the hole. had the same issue until I realized it
@@Nvs76 yep I tried
Aunt May looks like Conan o'brien in drag😂😂😂
Awesome oct Kyle woah
Ohhh man I really like that Dr. Octopus he is my favorite Spiderman Villain but I don't want to have a hard time putting in his tentacles
Sucks about the tentacle QC. I thought mine were loose at first too but I pushed them in real hard and haven’t had an issue since, actually it’s quite hard to get them out now. Seems like it’s the peg plus the base of the tentacle that fully needs to sit in there. You’d think it would’ve made more sense to just have them be apart of the backpack and have that secure in, but I guess they wanted the backwards compatibility. Hasbro really needs to get their QC under control cause if you get one that is solid like what I got he’s a super fun figure
This trick saved me and made me love the figure more! Mad love for this
Hmm...seems like more mixed reviews on the Doc Oct tentacles. What a shame they finally try to put out an Aunt Mae figure and they blow it with the two pack tentacle mishap. Well, you gave it your best shots, Kyle. That's all that counts. It's gonna be tough for me to have to pass this one up because I been looking to grab another Doc and an Aunt Mae and this would have been perfect. But, I'm probably gonna have to try a long game or something on this one.
Ironic that you swapped out the tentacles because they visually match their new Doc Ock's better, and I believe more accurate. 👍🏽 Tight tentacles and not so deep holes... Mr. Peterson you naughty boy!!! 🤣
Kyle you kept ur inner beast tamed..but I'd rather see you let ur warrior spirit out!!
The tentacles for my Doc Ock fit like a glove there was even a stratifying pop sound. Hopefully you figure out what’s wrong with yours because this Doc Ock is amazing!!
Read my pinned comment
They do fit, you just really have to force them in.
Mine fit but they sag so just as frustrating
Man that Peter Parker figure with the googles and camera @7:01 looks like Todd McFarlane " The Toy "...
Gota push it in hard unitl you hear that pop sound
I hope he’s seeing this but The thing is he’s not pressing them hard enough it’s almost making me laugh every time it falls out I had the SAME issue but I just got so pissed I jammed it in and then was like … oh i wasn’t pressing hard enough lol.
Same here. They click in but you have to push very hard.
I had to do surgery on mine to get to fit on three of the four holes
The tentacles really needed to be ratcheted or in square pegs. They don't stay in place at all for posing. What a wasted opportunity. It's almost like they didn't test it at all before sending it to production.
I don't buy this set, only GG and MJ, but that's because I'm tired of the prices of that goblin, still I think was lazy to use Bucky Cap pieces on him, and not pinless.
I will say hot garage quality control fail. How do you not test the tentacles out? Possibly the prototype had different tentacles? At least he didn't break.
As far as the three stooges go, if you can get around the fact that Shemp is no Curley, he's not bad, and some of his stuff is pretty funny. Now the classic line up of Larry, Moe, and Curley, nothing compares to it and if I had to choose between Shemp or his little brother. I, of course, like everyone else, would choose Curley. With that being said, Shemp is underrated imo. Doc Ock almost has Bret Hart sunglasses going there. I would have been furious if I wanted this Doc Ock and his tentacles didn't fit. At least there are others. I wouldn't have expected Aunt May to be the better figure here.
94 shades
Man you're lucky. I went bald at 19. I'm 38 now
Happy with mine very lucky the tentacles clicked in and haven't come out
Watch my overview for placing the tentacles
Read my pinned comment
I superglued mine in 😂
Mine stay in the back, but he can’t stand with all four in the air.
I’ll keep my custom tentacles Doc Ock and save the money. This two pack is a air ball. Hasbro is out to lunch.
Bend then into an L and push on the corner of the L for leverage to get them in until they click.
The first hasbro qc issue on the channel? Might be worth a revisit sell this pair off. Hasbro said hold my beer mcfarlane.
Aunt May is in contention for worst marvel legends of the year. As far Dr Octopus' tentacles, you have to push in them harder. It sounds like they click, but then push them in further and they will click again. I thought mine were messed up as well at first.
The best Marvel couple.
Pass!!! Good job Hasbro 😂
My mom is in her 70s and she's got short hair too.
That’s old people for you
Gonna have to glue those tentacles in
Push them until you hear them pop
Old woman cut their hair short usually cause when alot of woman get older their hair gets thinner, to not make it as noticeable they cut their hair shorter
She wears that in the animated series
OOOooo my Spidey senses detect a broken figure.
Edit: darnit.
Anybody want a wedding dress body mold
Well it’s nice to know my hunch of passing on this proved to be accurate. Oh, May is wearing a tie because they used the dress uniform Peggy Carter from MCU as the body. Can’t believe those tentacles though, while I was going to transfer them I’m going to hold back. I bet there will be another release or a big sale on this.
Trust me bro I’m always on board to shit on hasbro but you are not pressing them hard enough dude. You have to shove them in hard and they stay.
The tenticles go in fne, you just have to push REAL FUCKIN HARD!. They super tight fitting and when they go in, there's like a 2nd level of "in" you need to push past.
I’m not new to this 😂
@@KylePeterson1980 fair enough, it just didn't look like you were getting results and could have tired harder. But I have faith that you know what you're doing. It just didn't carry over well on camera I guess.
@@TonyKebell I took it off camera for glamour shots and played around with it for way too long
I’m convinced to not open and sell mine
Mine are decent but they do flop down pretty easily. Just did a review on my channel if you want to see!
What a shame. I think you were unfortunate as my version of this is fine and the tentacles fit snug. They do clip in with some force. I can see you were applying more than enough pressure though so must be a faulty one.
Man I really feel sad for you about those tentacles. Cause it's definetly QC issue. Looking at every single other review tentacles stay in. Only rotate easily but not coming off. I recommend you to check different reviews to like this figure more and see this is just your copy which has BIG defect
cardberrd 😂
wish we could get the HOT aunt May version from the movies instead lol
I held of on this be because I knew there would be Qc issues 😢
The tentacles fit in the fig’s back just fine, so it’s your figure that busted and not the design. They don’t fit in the retro carded one as well but you can make it work. Anyway, they fit in the new one perfectly for me and Ive taken them in and out multiple times.
Aunt may simply needs a custom comic head to turn it into what everyone really wants. It’s not even on model with the art work so that’s kind of odd.
The thing is he’s not pressing them hard enough it’s almost making me laugh every time it falls out I had the SAME issue but I just got so pissed I jammed it in and then was like … oh i wasn’t pressing hard enough lol.
I’m very disappointed as well. They feel like a marvel legends happy meal toys.
She doesn’t have the deepest of holes? 😂
i came for the hot garbage!
Soak in hot water before insert the tentacles
She doesn't have the deepest of holes 😢😢😂😂
Aunt may was hasbros way of having people pay 56 bucks for a dock oc.