Video není dostupné.
Omlouváme se.

In-depth video - Install a Touchscreen Audio System and Backup Camera into a 2006 Dodge Dakota

Sdílet
Vložit
  • čas přidán 29. 01. 2022
  • I’m back with another DIY video on installing an audio system and backup camera into a 2006 Dodge Dakota truck. I put this video together because it felt like one of the hardest CZcams video to find that shows every step a person needs to be successful in installing an audio system with a backup camera.
    If you like the video, then please subscribe and hit the like button. Also, make sure you check out my other videos.
    Boss Stereo BV765BLC
    www.autozone.com/stereo-speak...
    2005-2006-2007 DODGE DAKOTA DOUBLE DIN CAR RADIO STEREO INSTALLATION DASH KIT
    www.ebay.com/itm/284199111222
    Dremel
    www.lowes.com/pd/Dremel-200-1...

Komentáře • 33

  • @32lassalle
    @32lassalle Před 3 měsíci

    Thank for the Video, very clear basic steps

  • @investinghutler5323
    @investinghutler5323 Před 2 lety +3

    Thank you so much for the tips!! There is not too much content on these generation dakotas 🤘🏽

  • @Shakey31
    @Shakey31 Před rokem

    my keyless entry stopped working after installing aftermarket. Never went to get it checked since. Thanks for video!

  • @candyapu3
    @candyapu3 Před rokem

    Thank you!

  • @davidb3852
    @davidb3852 Před 2 lety

    Nice Video thanx

  • @jasonyounes5421
    @jasonyounes5421 Před rokem

    Thank you! I have this exact truck (more basic model) and was looking to do this exact thing!

  • @manuelcollazo
    @manuelcollazo Před 2 lety

    Thank u for ur vid. Had the same power problem with the durango. Just have to figure out which wires of the factory harness are the negatives for the speakers.

  • @vuduchildx
    @vuduchildx Před 2 lety

    Great job. I wish I would have recorded my adventure in installing my touch screen in my 06 Dakota. Cutting out the dash wasn't enjoyable, but the end result was worth it.

  • @ShadovvGazer227
    @ShadovvGazer227 Před 2 lety +1

    Awesome video my man ! I think I wanna go with this build but was wondering if you need to leave the aftermarket red wire plugged into the cig lighter for the whole installation ? Or just for the beginning data download

  • @edwindiaz6323
    @edwindiaz6323 Před 5 měsíci

    Can you please explain how you wired everything up?

  • @crobsauce2888
    @crobsauce2888 Před 11 měsíci

    Hey man great vid, from start to finish about how much time did it take to do this?

  • @bubbablaylock244
    @bubbablaylock244 Před měsícem

    i got a 06 dakota and am putting in a touch screen but i see you didn't use the red wire on the camera just wondering why because am waiting on Crutchfield wiring harness because i don't want to tap in to that 12v cig lighter.

  • @marrsneal
    @marrsneal Před rokem

    Can you tell me what you did to make the antenna for the radio work, bought a aftermarket radio has a different plug for the radio?

  • @jayjaymerging2659
    @jayjaymerging2659 Před 6 měsíci

    I have the same truck. Anybody knows why when i wire the accesory cable to the cigarette lighter , the radio stays ON does not power off when i shut down the engine .

  • @designertjp-utube
    @designertjp-utube Před rokem

    Great Car Stereo Installation Work!! When we saw you pull the plug on your *Air* *Bag* Unit, had you already *disconnected* the battery, and was there an On/Off Air Bag *Switch* somewhere up front like on my *2004* Dodge Dakota? If so, did you have to turn it to the off position as well?

    • @itinerantminds7536
      @itinerantminds7536  Před rokem +1

      Yes, the battery was already disconnected. Also, I didn’t see an on/off air bag switch.

  • @anthonycasola7872
    @anthonycasola7872 Před 9 měsíci

    What is the part number for the dash kit??

  • @FuckUp-yj4uu
    @FuckUp-yj4uu Před 9 měsíci

    I have a 2007 dodge dakota and I wanna put a single din but I can't find nothing to give me an inside look at it

  • @Pro1er
    @Pro1er Před 10 měsíci

    How did you get the wires from the rear camera into the cab? Did you drill a hole?

    • @Corporate11000
      @Corporate11000 Před 10 měsíci

      I don’t think he drilled a hole. Looks like just wired under the truck to the front and up to the drivers seat.

  • @Veery_live
    @Veery_live Před 4 měsíci

    I woulda ran the constant power (red wire) to something that comes on and off with the car in the fuse box. Also I don't get why u drilled the 4 holes makes no sense

    • @1shinner
      @1shinner Před 2 měsíci

      In order for the plate to mount flush you have to drill 4 holes hence why they gave 4 screws to put them in

  • @mississippi__king
    @mississippi__king Před rokem

    I keep getting a camera no signal on mine

  • @Bestyslittlebro
    @Bestyslittlebro Před rokem +2

    The most important part was the wiring and you skipped that.

  • @davidmiget9515
    @davidmiget9515 Před rokem

    Did you have a problem getting sound?

  • @manuelbadillo9810
    @manuelbadillo9810 Před 2 lety +1

    How did you know what wires got to what wires ?

    • @anicetomaldonado
      @anicetomaldonado Před rokem +1

      When you get the kit, it's color match easy. Lt green for the screen bypass connected with the black and done.
      For this radio. Some radios need a relay circuit to "turn on" the screen (also known as parking brake bypass) so it works driving down the road.

    • @itinerantminds7536
      @itinerantminds7536  Před rokem

      That’s exactly how I knew.

    • @Veery_live
      @Veery_live Před 4 měsíci

      Best way to do it. Ground that bypass wire out so it thinks car has parking brake on all the time

  • @jameslucabrasiiii
    @jameslucabrasiiii Před 5 měsíci

    Drumel😂