It has a hot water connection. It will not heat the water itself. With that said, we do not often turn our hot water on and generally wash using cool water in the summer time.
Great video, just a thought, you have mentioned that the start button is tricky as you must keep it pressed for exactly 2 seconds, I guess that the "delay" option would be handy, even if you set it to the lowest time at least you don't have to worry about getting the 2 seconds right. Greetings from Argentina.
Last week ours flashed a code and would not go into the maintenance cycle. When we pulled the trap on the front out there was debris. Once we cleaned it out, we were able to run the maintenance cycle again. Have you checked the trap in the front of the washer?
The symbol indicates locking out the control panel. If you hold down the timed dry button for three seconds it will either lock or unlock the buttons on the control panel.
They retail for around $2400. We got ours from a dealership going out of business and got ours for less than half the retail cost. We are unsure of the exact water usage for a regular wash cycle. That would be interesting to measure. The manual gives a range of water usage which depends on the load size and function you are using.
Thank you for addressing the hold down the dry butto. For three seconds to unlock the thing. I could not find this information anywhere else!!! 🙏
You're Welcome! Glad we could help!
Thank you so much! I was fighting with this machine because that hold to start button 🙄 and wasn't working!
You're Welcome!
Great explainer video! Does it require a hot water hook-up? Will it heat the cold water if no hot water connected?
It has a hot water connection. It will not heat the water itself. With that said, we do not often turn our hot water on and generally wash using cool water in the summer time.
Great video, just a thought, you have mentioned that the start button is tricky as you must keep it pressed for exactly 2 seconds, I guess that the "delay" option would be handy, even if you set it to the lowest time at least you don't have to worry about getting the 2 seconds right.
Greetings from Argentina.
You are correct! The delay button would help that situation. That is a funny, good thought.
I have this but it's not letting me do the clean cycle. So frustrating. Also, I can't pull it out of RV spot to do the back drain
Last week ours flashed a code and would not go into the maintenance cycle. When we pulled the trap on the front out there was debris. Once we cleaned it out, we were able to run the maintenance cycle again. Have you checked the trap in the front of the washer?
Do you know what the key symbol means - my washer goes on but not going
The symbol indicates locking out the control panel. If you hold down the timed dry button for three seconds it will either lock or unlock the buttons on the control panel.
Can you just dry something if it's wet, without a wash cycle? Thanks!
Yes, and you can put it through the spin cycle too without going through a full wash cycle.
@@rohdsteading5880 Thanks!
Are those devices still "made in Italy"?
They were manufactured in Italy. Now the Splendide website says that they are manufactured in European factories is our understanding.
@@rohdsteading5880 YES, in Italy they still got 4 factories. But this product is possibly maded in Poland or Slovakia. Whirlpool group.
@@rohdsteading5880they are made by Hotpoint ariston
Cost? and how many gallons of water does it use on regular wash?
They retail for around $2400. We got ours from a dealership going out of business and got ours for less than half the retail cost. We are unsure of the exact water usage for a regular wash cycle. That would be interesting to measure. The manual gives a range of water usage which depends on the load size and function you are using.