Turning eBay Junk into Profit! | Profit or Loss S1:E56
Vložit
- čas přidán 8. 03. 2024
- Huge thankyou to PCBWay to sponsoring today's video - Sign up here ▶ www.pcbway.com/ PCBWay produce reliable PCBs for customers with demanding needs. Get your quote in seconds, PCBs shipped in as fast as 1 day.
This one is a long one...
Beginner Soldering Setup [Affiliated] - geni.us/Knct0
My Soldering Setup [Affiliated] - geni.us/wdNJW
My CZcams Setup [Affiliated] - geni.us/CD32Jm
My Microscope [Affiliated] - geni.us/VUitBB
Hot Air Station [Affiliated] - geni.us/sYFRAL
Soldering Iron [Affiliated] - geni.us/USIdsE
Multimeter [Affiliated] - geni.us/VQcnlQ
Solder [Affiliated] - geni.us/B8Sdld
Board Holder [Affiliated] - geni.us/qE3oF
Screwdriver Set [Affiliated] - geni.us/fohS
Recording Cameras [Affiliated] - geni.us/002sg
USB C Electronic Reader [Affiliated] - s.click.aliexpress.com/e/_Dkr...
Xbox Removal Tool [Affiliated] - s.click.aliexpress.com/e/_DnD...
Amaoe Chip Holder [Affiliated] - s.click.aliexpress.com/e/_DnM...
PS5 Stencils [Affiliated] - s.click.aliexpress.com/e/_DED...
Tweezers [Affiliated] - s.click.aliexpress.com/e/_DCk...
Xbox HDMI Ports [Affiliated] - s.click.aliexpress.com/e/_Dl9...
TDP158 Xbox Retimer IC [Affiliated] - s.click.aliexpress.com/e/_DFS...
Nintendo Switch IC's [Affiliated] - s.click.aliexpress.com/e/_DmH...
Nintendo Switch Ports [Affiliated] - s.click.aliexpress.com/e/_Dko...
📞 Discord - / discord
📺 Twitch - / joeydoestechofficial
📷 Instagram - / joeydoestech
🙋♂️ Twitter - / joeydoestech
📧 Business Inquiries - joeydoestech@hotmail.com
My eBay Online Store ▶ www.ebay.co.uk/usr/joeydoestech
Link Generator [Affiliated] - geni.us/ex1mu
📓 Disclaimers:
All videos uploaded onto my channel are strictly for entertainment purposes only. If you want to follow along one of my guides or how to's, please bare in mind that anything damage caused to your belongings during or after the video is your responsibility. Please think carefully and ensure you are fully competent before attempting to carry out any instructions on my videos. Most importantly, enjoy watching 😁
Joey Does Tech is a participant in the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission incomes by advertising and linking to Joey Does Tech. - Zábava
Thanks for watching! If you do enjoy the content, please consider subscribing to take part in the journey to 100,000 subscribers! ❤😊
that ENxx Chip is a 3v regulator
also 0.02 amps
why aren't you using thermal camara
I did use a thermal camera 😊😊Apologies I should have put that in the video! @@Saivishal-bs6rt
Thanks very much for the shout out Joey, really appreciate it. Multimeter is looking great, and those Hakko PCB holders are great, I must invest in one. Thanks for everything you do for the console repair scene, love your videos ❤
You're more than welcome! Thanks again for the advice, appreciate it :)
0.02 Amps, you'll be seeing this in your sleep i think lol
I am! >.
An old friend of mine that did aircraft system fault finding said he used to stick a larger fuse in till the item that was faulty blew so he could get that changed, he said it saved him 1000’s of hours of fault finding
That's genius in a odd way.
Joey I've been having the same issue for over a month on the SAME console (even same colour), and turned out to be a faulty cap on the nand area. The one on the far right, where, if you were to install a picofly chip, you'd place SP2.
Try that out!
0.02 needs to be a t shirt
yes great idea lol 😂 😂
I follow your channel for several months now and it is incredible how you developed absolutely everything! Not only tools or electronic/fixing skills but also soft skills like communication, pace, etc...
Congratulations from Brazil!
You seem to be a very nice guy. You deserve everything you conquered and much more to come!
PS: Don't ever stop Profit or Loss series. Hehehe
Thank you I appreciate the kind words :)
Seeing this board repair gives me the itch to repair something
DO IT! :)
@@JoeyDoesTech in the process of repairing and modding 2 original xbox consoles that have bad dvd drives which are expensive to replace
Next you just need a sonic brush for cleaning ;) - Itch !! 0.02 amps.... honestly I would have the amp meter plugged in and then using the multimeter see where the 0.02amp is going to, that might show you where the issue might be ?
I know your frustration. I worked for Mercedes (retired now) and had a V12 Bi-Turbo that would would lose half the motor when run at 130 mph plus for extended period of time intermittently. It literally took a month and 5 scopes connected to the engine to locate the problem was on the right side (the V12 is basically two motors sharing one crankshaft) and an additional week of running the engine in the lot with radiator blocked to get the car hot enough to duplicate the problem. Turns out it was a bad solder connection for all the coils ground on the right side motor. Adding to the frustration was the wiring diagram from the factory did not match the vehicle in locating the "Z" splice for that ground. Replaced entire engine harness, problem solved.
i was gonna say why are you going 130+ anyways but if I had a V12 I probably would too😂
We were only able to drive it that fast a few times. Client paid for the track time. The other times wwe ran it on the dyno. The car was capable of doing close to 200 mph (ECM Chip Mod). This client took the car to Montana quite often to see what it could do at a time when there was no speed limit in certain areas of Montana.
Love the new format with the mixed in live stream, keep it up 0.02 amp man
all i have learned is a peep on one side = good and peep both sides = bad LOL
Hi Joey, if you want to get the name/writing off the back of the case use lighter fluid (which is basically the same as a product naphtha) on a cotton swab, no joke! 👍🏼
Joey Does 0.02 Amps!! If you don't drink alcohol, maybe it's time to start. Beware of gremlins. Great Attempted Repair, and Video! Thank You. 😀
Solid work Joey.
Phenomenal video once again 🫡
Great work
Ooooh I need a new multi meter and I like your new one 👌🏼
Isn't there some way of tracing what's going on with a 'scope rather than just changing chips and hoping?
Time to scratch my itch for more joey dose tech
:18:18 your correction with 460mah is still wrong, because, like we had sometimes ago in the live chat, the reading is mA not mAh 🙂 mA is the current power, mAh is the power over time (hour).
I genuinely don't know how you managed to stay calm doing this.
0.02 amps :D, love the videos. Just recently bought a DSi XL that shows no signs of life, even though the battery has 3.9 ohms. Quick google provided me with you're video from 2 years ago, where you replaced F1 and F2 and done you 'first' trace repair. As entertaining as the video was, you've definitely came along way Joey, keep up the great work.
Joey love your videos. Can you or some explain to me why you would clean flux off to then just add more?
I was itch-ing for a new video
Hi Joey, beautiful content as always. Powerful soldering iron, which model from Metcal is yours? thanks and regards from Italy
0.02 AMPS! Seriously, nice work.
I did like your older videos which put the info on screen for temp and airflow would be also good to see solder iron tip/type too
Are you pulling the replacement chips from donor boards?
Because isn't there a possibility that one of two of those chips are bad from the donor side?
Oh 100% correct.
You really have a 0.02 amps of itch for fixing stuff, according to a friend of mine. lol
That 0.02amps is a nightmare that someone needs to crack somehow, imo I think it’s an internal short in the cpu/gpu that just doesn’t show up as it’s so small
0.02a… JDT love the content mate
Naught point naught two amps. Great video.
I'm curious what solder you use and what temperature you set your iron to
love this series Joey btw 0.02A
0.02 amps. A modern day mystery it is.
0.02 amps, Joey’s favourite reading 😅
0.02 amps Well done on compiling the video into an enjoyable piece of content.
0.02A bummer u didnt get it going but was fun watching u try
The 0.02 Nightmare Switch Lite.. I'm sorry for Sally tough..
You’ll be having nightmares for months over that 0.02 amp draw Joey! Great video though!
Better luck next time mate.
0.02amps
Joe from Australia 🤙🏼🇦🇺
I think the problem is he need to remove a cap or two along the given rails and when the aberrant draw is eliminated he can slowly track down where the problem is, instead of just removing IC's willy-nilly
Zero point zero two Amps! It was a valiant effort, too bad you could get that one working
Wow epi 56 crazy how fast time has gone from Epi 1.
Turned that in to a real Switch of Theseus, huh
0.02 amps ;) don't forget lol
0.02A, if at first you don’r succeed, throw it at the wall 😂
0.02 amps… one day … that is all the display will ever say 😂😂😂😂😂
you could sell shirts with the 0.02 number and would sell
btw, you are really doing some great solder jobs, a shame this one didnt worked
I was itch-ing to see the sw-itch from the tw-itch livestream fixed, but it stays at 0.02 amps
Great content as always Joey 🎉
zero point zero two amps was my nickname in high school
“Welcome to S1 Episode 4,534 of profit or loss” 😂
Maybe you should have aimed for £500 plus or minus just for season two’s sake! 🙈
0.02 amps keep on plugging joey👍
0.02 amps, always make it to the end of course :)
0.02 amps, don't worry Joey , I have a feeling the next couple will be winners :)
Hey Joey, can I buy this motherboard you couldnt fix in this video??
It’s the Itchy and Scratchy Show! Now (not) playing at .02 A
0.02 amps will be on your gravestone I think lol :p
0.47 mA straight to APU reball😅
0.02 Amps, Itchy Does Tech. 😋
You can't win them all, enjoyed the video, really thought that by the end you would crack it 😞 0.02 amps
0.02 😂
didn't read all the comments, but I think I saw a short on the USB-C connector?
0.02 Amps! Sad to see you struggle with these.
itchy need frontline you do lol
itch (from the stream)
ITCH!!!!!😂
0.02 AMPS... I usually never comment, but I just couldn't help myself this time
0.02 Amps! 😊
0.02 amps..... then turn off 😂
The 0.02 Nightmare 😅
just itch (ing) for content
0.02 Amps The switch life 🙂
With sally’s spectacular spreadsheet. Why don’t you link the pages.
Then it will automatically update the main page as you put in the weekly costs and sales
0.02 amps ..... for you mate XD
On Min 13:40, do i see pin 6 and 7 bridging there?
They lead to 2 different test points
D+ and D- pins
0.02 amps...still! 😂
I stab myself with tweezers on regular.
Considering going professional in this sport.
I don’t have 0.02 amps to spare but i do have my 2 cents
0.02amps 😂
Itch! From the stream!
0.02 Amps obviously :D
0.02 AMPS!
0.02amp better luck next time mate.
0.02 ambs 😁
1.21 gigawatts… I mean 0.02amps.
İ believe charging port is shorted
0.02 amps
llap
Zer point zero two amps 😂
itch!
itchy muck itch itch😆
Joey, 0.02A is not 2 mA but 20 mA...
0.02 Itch!
0.02 nice try Joey
0.02 amperes
0.02 amps my friend
0.02
ZERO
POINT
ZERO
TWO
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHMPS!
0.02 Amps