How to cut and bleed Sram level hydraulic brake line.
Vložit
- čas přidán 23. 08. 2024
- SRAM Pro Brake Bleed Kit - amzn.to/2KmsJzP
Torx wrench - amzn.to/3fisgtQ
Break fluid - amzn.to/2KrZs73
Allen wrenches - amzn.to/3fq7Kb2
Open-end wrenches - amzn.to/3fhs9ie
SRAM Level Ultimate Disc Brake Black Anodized - amzn.to/32Z8O0v
Get Amazon Prime free for 30 days - amzn.to/2OCJeKe
Tutorial on How to cut and bleed Sram level hydraulic brake line. in this video we show you how to cut and bleed hydraulic line for hydraulic brakes on the bike. the procedure is the same for Shimano hydraulic breaks but the fluid is different.
OMG! YOU HAVE INSTALL THE RED OGIVE UPSIDE DOWN. YOU HAVE DESTROYED THE BRAKE. I CAN T BELIEVE😂
hopefully, people see these comments, before they use your video for DIY bleed service
Hai montato l ogiva rossa al contrario non ci posso credere
You should have removed brake pads before bleeding and have used a special spacer in order not to contaminate the pads with DOT liquid, buddy... If they have been contaminated, no spray cleaner will help you
thank you for your comment.
If the reservoir of the brakehandel is emtpy do you do these same steps or do you have to open the reservour up and fill it first before doing these steps?
Why do you make a guide when you don`t know what you are doing? check out sram`s videos on how to do this the right way.
you did not show the CUT or the reason to cut. This does not look very legit way.
WRONG! 3 minutes in in the video you're installing the red compression gasket up side down! It should be screwed on from the other end...
correct. i was wondering about the same
Yea my dumbass didn't read the comments before installing the compression fitting... luckily I didn't tighten more than finger tight before thinking it didn't seem right as the aluminum would crush under compression. I looked at a true SRAM install video and confirmed my suspicion. Please do your research as those fittings are one time use.
Fuera pastillas!!!
With all due respect, all wrong.
Русский? =)