Speaker Distance: Time Arrival (Audio Sync - Phase - Impulse)
Vložit
- čas přidán 26. 08. 2024
- I found a really nice way to set speaker distances using REW, which gives you perfect time arrival of sound. This uses an IR start time method. This doesn't use the typical impulse peak method. I think having audio arrive at the correct time is more important that being perfectly phase aligned at specific points in the frequency band. Because you can never be perfect everywhere. Again, this is why I think that when sounds arrive at the same time, it sounds better.
Let me know what you think, thanks.
Carl.
#SpeakerDistance #SpeakerPhase #ImpulseResponse
--------------------
MY FOLDERS AND DOWNLOADS
drive.google.c...
HARMON TARGET CURVE PROVIDED BY OCA!
drive.google.c...
--------------------
RECOMMENDED 4K ULTRA HD BLU-RAY PLAYERS
Panasonic UB9000: amzn.to/3C88TjF
Panasonic UB820: amzn.to/3OTHVUl
RECOMMENDED HDMI CABLE
AudioQuest 1.5M Cinnamon HDMI 48G: amzn.to/43UxLHw
SPEARS & MUNSIL ULTRA HD BENCHMARK (2023) 4K ULTRA HD BLU-RAY
www.hdmoviesou...
SPATIAL AUDIO CALIBRATION TOOLKIT (BY TECHNO-DAD AND JOE N TELL) BLU-RAY
www.hdmoviesou...
CALIBRATED MICROPHONES FOR MEASUREMENTS
MINI-DSP UMIK-1
amzn.to/44t9wjP
MINI-DSP UMIK-2
amzn.to/49onhDO
OLED DISPLAYS
amzn.to/3N8zeUS
RECOMMENDED PHONE APP CALIBRATION TOOLS
----White Balance Kelvin Meter
play.google.co...
----Light Meter - Lite
play.google.co...
--------------------
ABOUT ME
Hi, I'm Carl, and I run a family-owned business called HD MOVIE SOURCE with my dad, Glen, and my brother, Mark. I'm a passionate movie fan and tech enthusiast, and I love talking about the quality of video transfers. Calibrating speakers and subwoofers, encoding 4K content, and exploring all things techy are all my favorite things to do. I'm also a big gamer, and World of Warcraft takes up a lot of my time, but hey, someone's gotta do it!
Please let me know if you have any questions.
OUR GOALS
We proudly operate as a small family-run business. Our pricing strategy aligns with our dedication to offering Free Shipping to Europe and the rest of the world. To our esteemed US customers, please contact us via email for an exclusive discount. Your support is deeply appreciated, and we aim to provide Physical Media to everyone Worldwide!
--------------------
PLEASE FOLLOW US ON SOCIAL MEDIA.
MAIN SOCIALS
TWITTER: / hdmoviesource
INSTAGRAM: / hdmoviesource
FACEBOOK: / hdmoviesource
REDDIT: / hd_movie_source
OTHER SOCIALS
THREADS: www.threads.ne...
PINTEREST: / hdmoviesource
LINKEDIN: / admin
VERO: vero.co/hdmovi...
TRUTH SOCIAL: truthsocial.co...
WEBSITE
www.hdmoviesou...
SUPPORT US
/ hdmoviesource
DONATE
www.paypal.com...
CONTACT US
info@hdmoviesource.com
Damn. Great method.. Going to try soon on my system and my two buddies.
I never was happy with impulse method and now excited to try this.. 😊
Thanks again for taking time to show us..
Thank you. One thing I've noticed with Audyssey, is that it's best to do this timing work before you EQ.
Just tried your method on 3 systems.. Mine is anthem Avm70, by buddies is anthem Mrx1140, and a customer, who had NAD..
After aligning all speakers and subs, WOW.. The bass and timing was dead on.. And surroind was better bubble
Well done with this method!! 😊
Thanks again for all your hard work 👍
@@desertplanet3320 Awesome! Great to hear and thank you DesertPlanet.
It's been a long ride since your first videos but I thank you for your time .would you agree these steps are the correct order for a complete manuel eq.
1.finding best speaker location
2.subwoofer matching
3.finding speaker and sub target curve
4.eq for target curve
5.level match at 1k 85db all speaker, sub level ajust to taste.
6.finding best cross over
7. ajust timing
8. ajust lip sync
9. enjoy !
If you can find speakers that don't distort of have resonances at 85db then absolutely I agree.
Great method will try tonight. Thank you, Carl.
Great videos on REW! Watched every minute
Thanks Jason.
Thank you Carl.
Thanks for all your videos, I learned a lot 👍
Glad to hear it! I have another video I'm thinking about making for audio timing also.
Hey Carl, nice video again. Shows that group delay we talked bout with the mini dsp. Anyway the sync one 2 is a hand held calibration device you calibrate, it has a camera and microphone built in and it uses that test pattern to get sync perfect. I have one it works great. It’s expensive though, it was 4 or 5 hundred dollars can’t remember. But it works amazingly well for syncing the video to the audio, that’s its primary use case
Interesting, thanks. I'll look into it.
Question..
What channel is being used for timing reference with those external Atmos audio files for rew?
If it's let's say center, I guess you don't need to measure center channel for timing?
Thanks
Sorry, this comment got blocked by CZcams for some reason. Yes I use the center channel as reference, and that means timing doesn't need to be done on the center. But, you can still check the distance of the speaker I think, but I leave it at whatever Audyssey set it at.
Thanks!
Thanks so much!
Great Video again ❤❤
Thank you Carl !!!!!
I send you a email!!!
Greetings from Austria 🇦🇹
Thanks Dan.
Hey, Carl. I stumbled upon this vid again and I want to say that Audyssey can only affect distance in a 0.03m or 1.2 inch (0.1 feet) interval. What I do is get them all as close as possible with just the avr, then I slightly move the speakers until they’re all perfect. Does it make a difference? Idk. But I like doing it. I also use a “binaural” mic placement. Meaning I use the center of MLP mic position for just the center speaker and subwoofer. Then I move the mic to where my right ear would be (my ears are 8 inches apart so I move the mic 4 inches to the right of center) and I do all the right speakers. Then I move the mic to where my left ear would be and do all the left speakers.
I actually can tell a difference when time aligning using that mic placement method. It’s not a world changing difference but I figure why not
Yeah, I made a new video, and I discussed this. I didn't know it was 0.03m though. But I found a really nice way to get It timed well.
@hdmoviesource Thank you so much for these videos that layman can understand. I tired your method L and R aligned. But when I try center channel, no matter what I try the time on the arrival didn't change. Do you know what would be the issue here?
Are you using the center speaker as the timing reference? If so, that will be why? So, measure the center channel with Audyssey as normal, and never change that distance. Then, everything gets timed to the center channel. That's basically what I've done.
Which method i should use to align the volume levels; could you please make a video about volume alignment or tell me which one I should look at?
Thanks
I'm going o make a video about it soon.
Hi Carl,
Thank you for sharing this method; as with all your methods, i wanted to try it, but i'm getting confused and not clear about:
1) these differences between 'where it is' (-0,079ms) and where it 'should be' (0,062ms); for me that's a difference of 0,13ms (you calculated 0,09), am i wrong!
2) reducing or adding!? You say negative reference-timing is too early, so we have to reduce the actual distance-value; if positive -> it should be increased.
Why are you reducing the FR value in your measurement; i think it should be increased, because the reference-timing is positive!?
Where is the mistake in my thinking, because the results are showing you are right?
I may have had some mistakes. If I see -0.079 I wouldn't change that if I was using Audyssey.
I like the Harman Curve for my speakers. But then, my speakers were designed by Harman, so it makes sense.
Haha, true.
Hey Carl, if you had a fresh start woth your system how would you calibrate?
Calibrate Subs to Flat
Auto Cal
Eq Speakers
Time Align
Set Crossovers
Phase Align?
Anything else?
Ill admit, I havent seen all of this video but I just want to understand the overall process a little more.
That sounds about right to me.
Measuring with two different mics and one being analog with the receiver and one with usb and a pc wouldn’t that account for difference between audessey and REW?
Maybe yeah.
Carl, I find after calibration I have to change sub distance to get the best smoother integration with centre and mains, remove the dips around the crossovers because audyssey never gets it right, don’t you do that
I'm finding that raising my crossover fixes the dips. Might5 be worth trying. Testing some higher crossovers lately.
Hey, HD. I recently watched a video from Anthony Grimani on the AV Pro channel about Calibration. He says what he does (he's done a thousand or so rooms) is he plays pink noise that is 50% panned between the left speaker and center speaker, right speaker and center speaker, right speaker and right surround, etc. And adjust the distance of the speakers until the sound sounds like it's coming from right in between those speakers.
I tried his method last night and it was fast and easy. I made my own files using Reaper and it's ReaSurroundPan plugin.
He said that the reason he does all of his stuff by ear is because due to reflections in the room, even if the two speakers are perfectly aligned, they may not sound how they should psychoacoustically. What do you think?
Any chance you would be willing to share those files on a Google Drive?
Can you make Atmos files using that?
@@hdmoviesource I think you might be able to but I haven't done enough research on it.
@@cafiveohsrockbandremix9254 I will upload them shortly. I'll respond with a link.
Okay, thanks.
Just curious, are you planning on producing a video utilizing OCA's newest video titeled "Audyssey One"?
Any thoughts?
@@ts6640 Look at this [czcams.com/video/7hsyyO0ePFs/video.html]
I did. I'm going to take another look at it soon. I've heard mixed reports about it.
@@hdmoviesource looking forward to hearing of your findings!
I've never used the app and imported something to it, so I'll have to figure out how to do it.