FUEL INJECTOR REPLACEMENT FORD EDGE 3.5 TAURUS FUSION FLEX LINCOLN MKX MKZ
Vložit
- čas přidán 18. 05. 2019
- FUEL INJECTOR REPLACEMENT FORD EDGE 3.5 TAURUS FUSION FLEX LINCOLN MKX MKZ
► Fuel Injector: amzn.to/2UwdhVc
In this video we will show you how to remove and replace fuel injector / injectors on Ford with 3.5 or 3.7 v6 engine. If you need to replace fuel injector we will show you how to do that on Ford Edge but this same design is used in many models where the 3.5 3.7 v6 engine is used. We demonstrated how to remove and replace fuel injector on 2009 Ford Edge with the 3.5 engine.
This video might be helpful on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019:
Ford Edge 3.5 3.7 V6 Fuel Injector Replacement Removal
Ford Flex 3.5 3.7 V6 Fuel Injector Replacement Removal
Ford Explored 3.5 3.7 V6 Fuel Injector Replacement Removal
Ford Taurus 3.5 3.7 V6 Fuel Injector Replacement Removal
Ford Fusion 3.5 3.7 V6 Fuel Injector Replacement Removal
Ford Mustang 3.5 3.7 V6 Fuel Injector Replacement Removal
Ford F-150 F150 3.5 3.7 V6 Fuel Injector Replacement Removal
Lincoln MKX 3.5 3.7 V6 Fuel Injector Replacement Removal
Lincoln MKX 3.5 3.7 V6 Fuel Injector Replacement Removal
Lincoln MKT 3.5 3.7 V6 Fuel Injector Replacement Removal
Products used in the video:
► Tool Set: amzn.to/2MLRsuN
► Makita Impact: amzn.to/2D8CiuS
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. - Auta a dopravní prostředky
The problem with this engine Is the placement of the water pump.
Yup. Good job Ford
It broke and flooded my engine a few years ago, previous owner had to rebuild the engine.
alternator
Another of Ford's "BETTER IDEAS". Like their AWD, PTU, units NO DRAIN PLUG ideas. Saying that 18 0unces of oil will last the life of the vehicle.
@@davidcoleman9304 I got 190000 miles and I never had any problem with drive train awd or transmission
I'm a 34 year old lady and house wife don't know mechanics my brother was going to fix my 08 ford edge and he caught covid I saw this video and i fixed my car yesterday myself I'm excited and so happy.
Great job. I'm also going to attempt this
Local shop said 758.71 plus tax, I thought a little high...watched your video 7 times, easy peasy mkx running like new. Many thanks , 100 buck injectors and intake gaskets hr n half time.
For anyone watching this in the future. Be sure to release the fuel pressure in the lines before disassembling parts. He didn't explain it in the beginning of the video, but it'll be best to do this first before anything else.
If you don't do that, can it cause some damage to the fuel pump?
@@FSchimidtBR Possibly, from the ensuing fire.
Don't unbolt the throttle body from the upper intake. Just take the bracket bolt that is below it, out. The throttle body will come off with the upper intake. Also, If you can, use a blow gun and compressed air to blow dirt and debris off from on and around the upper intake before unbolting it. Place a piece of cardboard cut to fit over the top of the intake ports to keep stuff from falling in there.
Excellent advices. 👍
I didn't and it was still easy peasy, thx
I just replaced a fuel injector on my grandmas 2010 fusion 3.5L; had CEL for P0201 “injector circuit open” “cylinder 1” I was able to tear into her engine by following this video, and had the #1 injector replaced iand put back together in 3.5 hours. Word of advice they don’t mention it in this video but before you do anything, pull your fuel pump relay fuse and crank the engine to relieve the pressure. Also disconnect the negative battery terminal
They do mention this.
Solid video. I appreciate you being so detailed and especially showing how to remove the different types of clips. Thank you!
Great video, saved $1000 doing myself. I only did few things differently: I removed battery and used bungee cord to hold wires out of way. Did exactly everything else. Thanks guys!
I'm about to do it my self too ,wish me luck
This video was very useful. I am NO mechanic but was able to handle this job with some sort of ease because of the help. Thank you!
Best video ever explaining what I have to do tomorrow with an accent I enjoy listening to, SUBSCRIBED.
You guys just saved me over $400! I subscribed, liked, and even clicked a sponsor VRBO something I've never done at a CZcams fix.
You guys are awesome I learn sooo much from the videos ypu guys make👍...
Video was very helpful. I changed only 1- injector and this guy made it easy for me to do it my self.
Hey when you changed one injector did you have to reprogram it
Y'all are informative and hilarious. Keep up the good work!
Want to take a few minutes to Thank You! for this video. It not only gave me the courage to tackle this project myself but, also made the job easier to do. In my case I have a 2008 Ford Edge. It's slightly different (no pressure release valve on fuel rail) but, still was a big help. I replaced all 6 of the injectors even though the #5 was the problem. Well done and again a big THANK YOU!
How did you manage to release the pressure then?
Mine doesn’t have the release valve either??? What did u do to release the pressure
Excellent video!
Thank you guys so much for the help with this video! Saved me a lot of trouble
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: czcams.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I also did my sparkplugs since you can get to rear three plugs while doing injectors
Love your video . It’s very detailed and thorough demonstration ! Subscribed
very helpful. I need to know which injector is which. I will look it up but Big thanks !! Saved me a lot of money!!
Thank you for making this video. It helped me tremendously when replacing my own injectors.
Hi guys,...any help regarding to above issue?
I have a 2011 ford explorer gasoline is in the intake manifold coming through the throttlebody down in air filter housing . what cause this?
Done. Thanks guys
Gorgeous
Question: If the car sits overnight, is it safe to assume that there is no pressure in the fuel line, and it is safe to remove the fuel line?
This is why i miss my old 2002 Mazda P5. Car was so much simpler to work on. In the 11-12 years i had it only needed a thermostat, maf sensor needed to be cleaned once and towards the end i replaced 2 ignition coils at $20 a pop and it took 10 min to do. Since i got the lincon had to replace the transmission and now this fuel injector and i keep hearing about the water pump possibly going out.
3.5 would be a great, reliable engine if not for the water pump location. Change engine oil and coolant regularly.
Yes, I removed the throttle bracket instead of the throttle body
I removed intake with TB. Saves couple sec for you. Much more for me. Thanks for the video.
Tb?
@mathermp what'sa TB?
@@DK-bk1vq throttle body …
@@Itzkwann Damn! 🤦♂️ Lol
Thank you very helpful, Do i need to replace them all, or replace as per the scan code reading
One thing I'd suggest dip each injector in a bit of gasoline for easy insert I tore my car down twice second time the gas trick is what worked because the first time the injectors were not in properly.
Very good video! What do you charge for that job on a flex?
I have a 2014 Ford Taurus and replacing fuel injectors but can’t figure out how to take clips off of the injectors
Does this video work for the Base Model Ford Explorer 2014 ?
you can do this without open throttle on the antec's body
How are those springs supposed to go on.
I need help with fuel injector sensor location a my ford explorer 2012 3.5 v6.
Is that same engine set-up as an mkz 2006 I gotta replace bank 5
Anybody know the flow rate of the oem fuel injectors?
I just changed my injectors car runs perfect but now hard to start any ideas? Originally was misfire #2 cylinder replaced plugs and ignition coils still got the misfire code but starts without issue. Now don’t have a misfire car runs great but hard to start cranks a few extra times now.
it caused by fuel pump
Ok, I’m at the 6:10 mark where you take an obvious pause and then say, “now you go ahead and remove the bolts…”
I can’t seem to get the bolts out. They get loose and just spin. All except the bolt on the top of the manifold. It came right out. I’ve looked all over for a solution like- “when it is loose and spins freely, turn it - to the right until it lets go completely” or something similar but I’m stuck here with no idea what to do. Can anyone help please??
Hello all! I have replaced fuel injectors of my Fusion 3.0L V6 twice, and both times the pressure regulator of the fuel pump throttle has failed, causing long starts when the engine is warm. Does anyone have any idea what could have happened to the pressure regulator to fail? Is there a secret trick to depressurizing the fuel line or re-pressurizing it before starting the engine?
Am I the only one who got lost on relieving the fuel pressure? All I heard was there's a special tool, they have it, but wouldn't recommend it. Do it? Don't do it?
..so Remove the fuse for the fuel pump and the relay and run the car til it runs out of gas? I'm lost on that part.
I need your help 2014 Taurus 6 Cilinder code P219B I replace fuel injector , intake gasket, spark plug, and it’s not solving the problem any ideas please
Wow. Only tool needed is a 8mm socket with extension and ratchet.
I would cover openings before removing intake. Rat poop all over the intake could of went into the opening.
What is the special tool you need to release the pressure on the fuel line? He said don't do it if you don't have the special tool but didn't say what it was...
What number fuse goes to 2008 fuel injection
Change the plugs, too!!
Hi would I get an engine light if anything is wrong with the fuel injector? I’m because, my 2010 Ford Edge hesitates and jerks between 55 MPH and stabilize at 70 MPH. This is after changing coils, spark plugs, air filter and cleaning the throttle body. I don’t get any engine lights on my instrument panel.
you also could have a dirty carb. dirty fuel pump, faulty fuel pump, Bad Throttle body sensor "lease option", Bad 02 sensor would also cause it.
Can a bad fuel injector dump fuel into the intake?
I’ve noticed fuel dripping from the cylinder one injector.
My wife Ford Flex had a blinking check engine light with the code PO301 misfiring.
Was it smoking?
@@charrobudligth yes it was smoking, jerking with a strong fuel odor. It was a bad fuel injector!
Ya and it'll ruin the cats
I have ford edge 2011. Sometimes, wrench warning appears along with engine fault, engine decreases speed and despite pressing accelerator car reduces speed and then starts jerking... Seems like it's some sort of engine missfiring.. I got all plugs replaced, throttle body cleaned but problem still persists... It happens on low speed by the way. Need someone to kindly share a solution... I m thinking to get fuel injectors checked, repaired or replaced but will it eliminate the issue?.
Sound like an o2 sensor, usually the most common problem with those engines, use an obd2 reader and it should tell you exactly which needs to be replaced
Remove fuse for fuel pump relay and what?
Which one is cylinder 5
I have a 2013 Ford Taurus with a code p0430 check engine light turns off then few days later it comes back on again with the sale code any idea what is causing it to do that ??
It’s your oxygen sensors after the catalytic converters that aren’t reading correctly. I had this issue on my SHO. Just replace the sensors, run for a bit and you should be good. Hope this helps
Simply Built_ did you have the same code p0430 ??
I have codes 420 and 430 and on a cold start I got cylinder 4 misfire. I'm wondering if injector 4 is bad which ruined my cats I'm also getting bad mpg
So what’s wrong with 3.5 Ecoboost and when it occurs?
Same here, I would like where u found info on which injector is for which cylinder. I have a.Chilton manual but does not tell me much.
I had a P303 reading on the fault reader. In this case Cylinder 3 was misfiring.
It could be the spark plug, the coil, fuel injector, or a vacuum leak.
Mine was the coil.
Internal water pump triggers me. Never again.
so much time has passed and this automobile has not appeared in russia.
Replace plugs while you're back there.
Comment
Reply
first thing disconnect neg.battery term or u will be using fire extinguisher and call fire truck then have big problem wife get mad kids have to walk to school oh no🤤
All that work for 6 plugs 😭😭
FRANÇAIS
easiest way to tell that someone doesn't regularly work on cars is when he wears his bling while shooting the video. If u want anyone to take you seriously, take the watch and ring off.
Never wear jewelry while working on a vehicle. That is a serious safety hazard and you could also cause damage or get it caught on something.
"Guys". Omg this guys videos are so hard to watch.