Anytone AT-779UV PC Programming Tutorial
Vložit
- čas přidán 4. 08. 2024
- Here we take a look at how we can program the 779UV from Anytone. I cover editing current channels and adding new channels, plus sending and receiving to the radio via the included USB programming cable.
Join this channel to get access to perks:
/ @techmindsofficial
Products used in my videos can be purchased through my Amazon storefront.
US ► www.amazon.com/shop/techminds
UK ► www.amazon.co.uk/shop/techminds
Support This Channel by becoming a Patreon.
My Patreon ► / techminds
My Twitter ► / techmindsyt
My Amazon ► www.amazon.co.uk/hz/wishlist/...
My PayPal ► www.paypal.me/mobiledev
Merch Store ► teespring.com/stores/techminds
If you enjoyed this video please help me out by subscribing and help me get to my next Milestone of 50,000 Subscribers!
Intro/Outro Music "Summer" - License certificate 1821842
www.bensound.com
#TechMinds #SDR #HamRadio - Věda a technologie
This is the hardest radio ever to program.
Most others can be done manually.
The program is counter intuitive.
Chirp needs to offer support for this radio
A nice little radio. Hits repeaters well and I have had great reports on signal strength and audio too. Is it possible to amend the .dat file to have the regularly used repeaters and frequencies? Or is it a case of saving the original for safety and then saving another file that can be edited to what is required? Cheers
Nice job.
Decent little radio: one that seems like one could live very well on a daily basis. Good stuff!
73 de N2NLQ
Would love to see how you do this via either the microphone or front panel, especially how to manually program the transmit frequency. Thanks!
i have a question and need little help. FIRSTLY i will say GREAT video to program!!!
Second, I have downloaded the "Newest" software (AT779UV_Setup_2.01) directly from Anytone
Its all installed correctly
The port on the front on the computer is 3
The drop down on the programming software (communication setting) ONLY has COM 1
I have uninstalled and reinstalled
ANY IDEA??
Thanks in advance!!!
I'm new to all this, but why is there no offset input when programming in the factory program?
Where can I buy a cable capable of connecting to this radio with 1.0 firmware version?
I have one of these radios that I’m trying to program for a mate, I get everything setup fine, and the radio goes into clone mode but fails to read any ideas.
Good video. although when I try to save the sheet. I cant recall it
Any ideas please Thanks
Thanks for the video. Easy to understand and well presented. I have programmed all of the simplex channel but am at a loss on how to program the duplex channels. I know the TX freq but the RX freq is apparentlty .75khz higher. As you said, the vid is pretty generic and worked fine with my AT-778UV.
You are welcome!
questions, what squelch mode; Carrier or CTCSS/DCS, and Reverse for repeaters?
Anyone know how to save a channel name via mic or front panel, I can enter the characters but cannot work out how to save? Display is set to name.
Could anyone please tell me, how many memories per second (roughly) can this radio scan? Thanks.
We can't communicate with the repeater for receiving and transmitting. What settings are used to communicate with the repeater. Frequencies, encode and decode were set at the station
what dose the optional signal do
I'm a new ham operator (in the US) and due to the confusing description on Amazon I purchased this radio thinking it was an amateur, not GMRS, radio. **The US version of this radio is GMRS only!** I only discovered this after downloading the software and attempting to program the radio (which takes forever). I got this exact message on the screen..."Frequencys is wrong!". It's going back to Amazon. Yet another lesson learned.
You can Rx and TX on Amateur bands by unlocking it.
*The US version is NOT GMRS only; it only comes preprogrammed that way.
You can easily unlock the US Ham bands (2 mtrs and 70 cms) by holding down V/M when the power is off and turn on the power: a menu will appear from which you can select the broader ham coverage. There is also Anytone supplied software than can do this, as well as programming a Codeplug for multiple channel selections (both GMRS and Ham at the same time, if needed).
For $99, you can't beat it and now in use in my car with included cigarette lighter plug and $20 mag-mount dual band antenna.
Yet ANOTHER lesson learned! :)
@@MikieLAX thanks for the info. No one I checked with could tell me that. I sent it back and upgraded to the AT 778-UV and so far it's been a good choice.
@@happyjack880 You're Welcome! The next reader will hopefully read it in time.
Unfortunately the so-called manual that comes with the 779 omits much of this helpful information. It may be an FCC Part 95 restriction on Anytone's ability to promote this feature, however!
@@MikieLAX I have it locked on GMRS and by pressing V/M and start i only have GMRS there are no other options , can you pls tell me how i can unlock it from the software.
I just got one of these but I'm struggling. Does anyone know how to enter Offset - + via software ?.
How to name a program from the microphone and save it?
My lab top does have three ports and it’s not reading it or uploading the channels that I want for my radio
How i can cancel the memory on the software?
I have a fully programmed Anytone at779 uv and wonder if anyone knows if I can copy the programmed channels to my CRT Micron.
Can you program this radio directly without a PC, or from a MacBook, iPhone or Android phone?
This is my problem, did you ever figure it out?
Hello, how could I configure my station to be able to operate with a repeater. I have correct subtones and frequency, I can transmit but I do not receive through the repeater. greetings thanks
Double check the actual transmitted frequency, maybe an issue with the CPS.
Thank you for this presentation 73 de HB9HIW
How to save alphanumeric display without using the software?
I can't get anything done. The program wants a "program password" and the idiots at Anytone WONT anaswer my emails asking for a password!
Has anyone used chirp to program the 779 ?
Why won't it let me edit or add any channels?
Some Operational Tips:
Open up the Ham 2 meter and 70 cm bands to transmit on the USA version:
1) Turn off the power.
2) While holding down the V/M button, turn on the power. Use the Up and Down arrow keys to change from the GMRS setting on the display to 136-174 MHz; 400-470 MHz and now power down.
3) When you power back up licensed operators can now transmit on the GMRS channels and the 2 meter and 70 cm Ham bands.
----------------------------------------------------------------
Giving a Channel an alphanumeric name without using a computer:
1) Go to the appropriate Channel
2) Push the FUN button and using the V/M and MAIN buttons to go through the Menu items until you reach Function 29: DSPCHANNEL and using the Up and Down arrow buttons, select NAME. Push the FUN button to exit the Function menu.
3) Push the FUN button and using the V/M and MAIN buttons to go through the Menu items until you reach Function 12: CHANNEL NAME. Using the Up and Down Arrow buttons, scroll through the list of 1-0, A-Z and a-z to find the first letter. When you do find it, push the MON button to confirm that character and move to the 2nd position. Repeat as necessary until up to 8 characters are entered.
4) Push A-FUN on the mic and release and "func" should appear on the upper left of the display; and then hold down *-MON to save the new name.
5) When finished push the FUN button to exit the Function Mode.
----------------------------------------------------------------
Programming a repeater channel without using a computer:
1) Switch to VFO mode (from Channel Mode) using the V/M key
2) Using the number keys on the mic, enter the repeater's output frequency
3) On the mic, push FUN then 9 repeatedly until the proper split (+ or - or blank for Off) appears above the frequency.
4) Press the FUN key on the Radio and use the V/M and Main keys as an up/down to get to function 10:Offset.
Use the Up and Down arrow keys to set your offset split, such as 5.00000MHz or 0.60000MHz (you can hold down the Up or Down key to have it continuously change).
Once you get to the proper offset, push the FUN key again.
5) Press the FUN key on the Radio and go to Function 01:T-CDC and use the Up and Down keys to find the proper transmit PL Tone.
Use the same method to optionally set the proper receive PL Tone, if necessary, on Function 02:R-CDC (or Function 03: RT-CDC if both tones are the same)
6) You can rotate through High, Medium and Low transmit power using FUN and 0 (zero) on the mic.
7) Save to the first open channel by pushing Fun and UP on the microphone (or then use the UP and DN keys on the mic to scroll through the available channels, with empty ones saying NULL
8) Save to this channel holding down the "MON-*" key on the mic and you are done!
----------------------------------------------------------------
Use DCS Digital Tones:
Go to desired channel
Press FUN on mic
Press 1 on mic
Go to menu 1 using V/M or Main key on mic
Press number 1 on mic to cycle to 000 N display for menu 1
Use up and down on mic to scroll to code corresponding to desired DCS code.
List is in the instructions.
Use V/M or Main to go to menu item 2. Repeat selection process
Press DIL on mic to exit.
_________________________________________________________________
New Radioddity DB20-G CPS software V2.02
1. Change the default bandwidth from Narrow to Wide.
2. Address the bug that "when repeater TX frequency change, RX frequency automatically match"
----------------------------------------------------------------
I have it locked on GMRS and by pressing V/M and start i only have GMRS there are no other options , can you pls tell me how i can unlock it from the software.
Hi. I was changed name of channel, but I can't save it. Can you help?
@@dumitrescuv89 What is your firmware version? Power down, hold V/M and power up to get version number. What is the version of your software?
@@nietylkoremont sometimes it takes more than one try to save it for some reason when using the keypad. Be sure to first push A-FUN on the mic and release, note "func" now appears on the upper left of the display, and then push and hold *-MON on the mic to SAVE.
@@MikieLAX 2.28
What a load of rubbish the programming software is, no insert, no copy, no past, no import, no export, no move up, no move down. its a abysmal. Also no nick gain, i really really love the radio, programming software is the assault!!! well can't describe how frustrating it is, it really is frustrating compared to anything else have used that's crap. For me this radio will never see the light of day with me again until they sort
eplace the software or chirp add this radio.
Beware the Anytone 779UV UK version 2.34 cannot be opened up whatsoever. I'm sending it back as I want to use it while staying in USA. 4X4 Norfolk CB lied to me said they can be unlocked, that's BS they cannot be they are stuck. No Data Cable & the box had been opened. Bad information caused me to buy a cable & you do not unlock it with a PC. Hate liars who have bought a cheap almost useless lot & lying to sell them. It's going back tomorrow.
The CPS can't unlock it. A dealer program can.
Why do you hate the letter "T" so much?
Turnips
First
I have a better idea. How about LEARNING the functions of your radio WITHOUT A COMPUTER, by MANUALLY programming it? If you PC does it for you, you don't LEARN shit!