Wish I would’ve seen this video a month ago before I bought about 40 ultra pros haha. Great video! I just bought a bunch to replace all the ultra pros I have.
You are dead on with the superior fit sleeves. I prefer the snug fit the Ultra-Pro 75-100 pt provide. I've tried the pro mold sleeves and I agree they are slightly too loose comparing the two. Thanks for the tip.
Thank you for the review, I am considering getting these to transfer some cards that are in one-touch holders without a penny sleeve. It seems having cards in just a one-touch causes minimal peeling on the corners for non-chrome cards.
My favorite aspect is that these are made in the U.S.A. Bought a 25 pack of ultra junk. EVERY SINGLE ONE had factory scratch marks! U.S.A. ALL THE WAY!!!!!!!!!!!
The 130 points unfortunately dont fit nice. It just a coffin ya card swims left to right in. Super waste of purchase. Left to right the card just moves around. I put super thick RPA too. Even the 100 points the card go move in the one touch. Could damage edges.
@@JoeyTheCollector tell you the truth im a noob. I actually watched your video and said “man let me try using the penny sleeve that comes with it” they have the space on sides that hold it in place. Now they work beautiful. I was meaning to come delete that comment and fix it hahaha.
Who do you recommend to buy in bulk? I have around 1,000 numbered Ohtani Cards to put in Pro Mold. I figure you could get a better deal since you're advertising for them & through you & I could also plus the amount I'm getting. I would have to send you a message. But I don't know how you 2 worked besides looking at videos.
So you can use random penny sleeves with the gen 1 pro mold? I think the gen 2 and 3 you have to use the penny sleeves that come with them in order for your card to fit right?
Very nice video. Like Pro Mold also because they are American made. I got the older with the diamond corners. 35 pt and my normal cards still move around in holder? Any penny sleeves you use for them? I ruined a card I was going to get graded 🤦♂️ it messed up bottom of card. What would you do if normal card has movement in 35 pt. ?
Thanks for the awesome video! 2 quick questions: 1. Do you think it's worth moving all of my cards in these to the 2nd gen, or just keep what I have and use 2nd gen moving forward? 2. For superior fit sleeves have you tried ultra pro 35-55pt on the 'Pro mold 35pt with penny sleeve,' or is the ultra pro 75-100pt still better on those 35pt as well? Thanks a ton!!
I am using the new style moving forward and keeping what I have in the first gen cases, both are good choices. As for the superiorfit sleeves, I am still using the same ultra pro size on the 2nd gen and they fit great.
2nd and 3rd gen Pro Molds with the Arrow Head corners are the best!... The ULTRA PRO black out borders are cool too but I've noticed the tabs usually have side to side play on most Ultra Pro hard cases, plus they aren't as clear, Scratch more easily, and magnets aren't as strong... Anyone have any suggestions on what to use for inner and outer sleeve in on thicker cards 55pt and above?... A 50 Micron 64mm X 90 for inner and a 100 micron for outer is prob all that can be pushed... Or A 50 micron and 150 micron (or 100 micron and 100 micron is definitely Max!) No way I can go with a 150 micron and a 100 micron, or 150 Micron and 150 micron, or 200 micron and 50 Micron or anything thicker... I prefer .5-1 micron each for double sleeving. Or using a 1-2 micron single non stick sealable flap sleeve like Ultimate Gaurd or Dragon Shield (but do they make a 64mmX90mm and a 65mmX90mm???) Instead of just the 63mmX88mm playing card size? Cause will be too tight... Also, if going with a 91mm, it is pushing it for height as my case pockets are 90.50 millimeter so I prefer 90mm. Also when I double sleeve the inner 90 millimeter sleeve will usually either be flush or about .25 millimeters sticking more past the outer sleeve and that works out GREAT for a 90.40-90.50mm case pocket. A 91mm outer sleeve will probably still be fine and work because the strength of the magnet will shut it with force. The sides are more prone to not shutting, they are more critical.
Hope you all enjoyed the video. If you did, please consider subscribing and leaving a comment. Thank You, and Don't Forget to Keep Collecting.
dude props to you for making it look so easy to sleeeve the one touches it’s so tight i’ve ripped atleast 20 of them lol
Gotta squeeze the sides and it helps it go in easier.
Wish I would’ve seen this video a month ago before I bought about 40 ultra pros haha. Great video! I just bought a bunch to replace all the ultra pros I have.
These pro-molds are where its at.
You are dead on with the superior fit sleeves. I prefer the snug fit the Ultra-Pro 75-100 pt provide. I've tried the pro mold sleeves and I agree they are slightly too loose comparing the two. Thanks for the tip.
Love those pro molds, penny sleeves with a one touch is a must! Those GOATs in a raider jersey is nice!
I am glad I found these. They sure do beat a top loader for the expensive raw cards and I don’t have to worry about scratching them.
Hi - just curious why you don’t use the 35-55pt. Superior Fit sleeves?
Very cool that the card can actually fit in the sleeve inside the one touch!
These are some next level magnetic holders. They are really great.
@@JoeyTheCollector what size superior fit sleeves would you use for the 20 point pro molds
75-100 Point for the Ultra Pro. They work perfect on these.
Thank you for the review, I am considering getting these to transfer some cards that are in one-touch holders without a penny sleeve. It seems having cards in just a one-touch causes minimal peeling on the corners for non-chrome cards.
Awesome, thank you bro this is the video I was looking for!
Hell yeah dude, glad it helped.
Great video Joey! I just picked these up and they are awesome! More product reviews! Have a good one 👍
Glad ya liked the video. These holders changed the way I organize my collection, can’t beat em.
Thanks for letting me know about pro mold, informative video.
No problem, I noticed there wasn't a lot of videos on it so I figured I would share my experience with them. Thanks for watching.
My favorite aspect is that these are made in the U.S.A.
Bought a 25 pack of ultra junk. EVERY SINGLE ONE had factory scratch marks! U.S.A. ALL THE WAY!!!!!!!!!!!
Have you messed around with Superior Fit sleeves for graded slabs? I love how snug these are on the mags hoping for the same on slabs.
Yes, they are awesome. I like the clean look they give.
Hi, any experience with using these on the 2nd Generation Pro-Mold with arrowhead corners? Thanks! Helpful video
Yes, I like the 2nd gen better. I still use both, mainly this type for my thicker cards because 2nd gen isn’t available yet.
Awesome stuff my man!!
And great video as always.
👌🏽😎🔥
Thanks, figured it would be some good information people may want to know about.
The 130 points unfortunately dont fit nice. It just a coffin ya card swims left to right in. Super waste of purchase. Left to right the card just moves around. I put super thick RPA too. Even the 100 points the card go move in the one touch. Could damage edges.
I haven’t had any issues. They have worked good for me and the gen 2 is also nice.
@@JoeyTheCollector tell you the truth im a noob. I actually watched your video and said “man let me try using the penny sleeve that comes with it” they have the space on sides that hold it in place. Now they work beautiful. I was meaning to come delete that comment and fix it hahaha.
Who do you recommend to buy in bulk? I have around 1,000 numbered Ohtani Cards to put in Pro Mold. I figure you could get a better deal since you're advertising for them & through you & I could also plus the amount I'm getting. I would have to send you a message. But I don't know how you 2 worked besides looking at videos.
Superior fit has a sleeve specifically for the pro-molds I thought. Do you think these 75pt-100pt fit better?
Yeah those should fit good. Thats what I use, superiorfit brand.
So you can use random penny sleeves with the gen 1 pro mold? I think the gen 2 and 3 you have to use the penny sleeves that come with them in order for your card to fit right?
Nice! Will have to check some of those out. 👍🏻
I really like them!
Very nice video. Like Pro Mold also because they are American made. I got the older with the diamond corners. 35 pt and my normal cards still move around in holder? Any penny sleeves you use for them? I ruined a card I was going to get graded 🤦♂️ it messed up bottom of card. What would you do if normal card has movement in 35 pt. ?
If its a normal mag, most people just lay a penny sleeve over the top. I like these over doing that, great protection for the card.
What size does the 1st bowman chrome autos take? 35 or 55? I have to order in Bulk from Canada nobody Sells singles to try out
What size penny sleeves are you using for a 75pt card in the pro mold 75 pt case?
I use the normal ultra pro card sleeves but if you buy the 2nd gen they come with a penny sleeve.
These better than ultra pro? Have magic cards may look for better storage for long term
Yeah, the penny sleeves around the card prevent the case from scratching the card.
Hey man dope video, i have a question. Let’s say the card is a 35 pt what size should i be buying?
I use the 35pt size. Its fits good.
@@JoeyTheCollector thanks for the reply! One more question lol, have you tried the gen 2 for thicker cards like 100-130 pt?
@@Trappadelic yes and I like them.
why card sleeves are you using for the thicker stock cards?
Ultra pro thick sleeves.
Thanks for the awesome video! 2 quick questions:
1. Do you think it's worth moving all of my cards in these to the 2nd gen, or just keep what I have and use 2nd gen moving forward?
2. For superior fit sleeves have you tried ultra pro 35-55pt on the 'Pro mold 35pt with penny sleeve,' or is the ultra pro 75-100pt still better on those 35pt as well? Thanks a ton!!
I am using the new style moving forward and keeping what I have in the first gen cases, both are good choices. As for the superiorfit sleeves, I am still using the same ultra pro size on the 2nd gen and they fit great.
@@JoeyTheCollector Thank you!!
2nd and 3rd gen Pro Molds with the Arrow Head corners are the best!... The ULTRA PRO black out borders are cool too but I've noticed the tabs usually have side to side play on most Ultra Pro hard cases, plus they aren't as clear, Scratch more easily, and magnets aren't as strong...
Anyone have any suggestions on what to use for inner and outer sleeve in on thicker cards 55pt and above?... A 50 Micron 64mm X 90 for inner and a 100 micron for outer is prob all that can be pushed... Or A 50 micron and 150 micron (or 100 micron and 100 micron is definitely Max!) No way I can go with a 150 micron and a 100 micron, or 150 Micron and 150 micron, or 200 micron and 50 Micron or anything thicker...
I prefer .5-1 micron each for double sleeving. Or using a 1-2 micron single non stick sealable flap sleeve like Ultimate Gaurd or Dragon Shield (but do they make a 64mmX90mm and a 65mmX90mm???) Instead of just the 63mmX88mm playing card size? Cause will be too tight...
Also, if going with a 91mm, it is pushing it for height as my case pockets are 90.50 millimeter so I prefer 90mm. Also when I double sleeve the inner 90 millimeter sleeve will usually either be flush or about .25 millimeters sticking more past the outer sleeve and that works out GREAT for a 90.40-90.50mm case pocket. A 91mm outer sleeve will probably still be fine and work because the strength of the magnet will shut it with force. The sides are more prone to not shutting, they are more critical.
Are you using Ultra Pro standard-size penny sleeves?
Yes for my 35pt and 55pt cards.
I use 20 point ones for my pokemon
Ah yeah, Magic and Pokemon have that thin card stock. These would work great for those in the 20pt.
Will the normal/average cards be too loose in a 55pt mags?
Yeah I would go with a 35pt on the standard sized sports cards.
@@JoeyTheCollector thanks bud! 🙏
Thick card penny sleeves fits in also in these mag cases ( for thicker cards)?
Yes, I used the thick sleeve on a National Treasures card in the 130pt holder. Also on Spectra in a 100pt.
Look nice 👍
Thanks!
Klay Thompson! #wsucougar
I am hoping he will be healthy and stay healthy next season.
@@JoeyTheCollector me to for sure dude
Do you store the cards in a box? Something like this? czcams.com/video/_iFccOvkypo/video.html
I do not. Everything is in cardboard storage boxes. I do not trade or sell, I don’t take anything with me to shops or shows.
present sir
Thanks for the continued support.