3.5hp Mercury Carburetor Upgrade

Sdílet
Vložit
  • čas přidán 11. 09. 2023
  • 3.5hp Mercury Carburetor Upgrade
    3.5hp outboard upgrade
    3.5hp Mariner outboard carburetor swap.
    Thanks for watching my video on 3.5 hp Mercury Carburetor Upgrade to a 5hp with a simple Carburetor swap.
    Hope you like the video, please help support the channel by liking & subscribing and if you're feeling even more generous you can buy me a coffee.. =)
    3.5hp Mercury Carburetor Upgrade
    www.buymeacoffee.com/Handyman...
  • Jak na to + styl

Komentáře • 16

  • @JamesSmith-yb2vi
    @JamesSmith-yb2vi Před 18 dny

    I just did the same now, easy peasy, and the engine is a lot more sound at least in the testing bucket. Tomorrow will test on the lake. I love to have a light engine with 5Hp. I use it in a skiff for fishing.

  • @paulkneebone8139
    @paulkneebone8139 Před 3 měsíci +2

    Please can you share where you got the new carb from thanks

  • @JamesSmith-yb2vi
    @JamesSmith-yb2vi Před 19 dny

    Carb can be bough from Amazon or eBay

  • @signpost5596
    @signpost5596 Před 3 měsíci

    Other YT vids seem to indicate the upgrade solves the stock carb hesitation issue while giving negligible power increase. In theory the upgrade kit should fit on the 2.5 as well since it's the same engine as the 3.5 (physical dimensions).

  • @danielbeecham4165
    @danielbeecham4165 Před 2 měsíci +1

    Hi, can you please share where you got the 5hp carb from.

  • @user-vv7op5su3o
    @user-vv7op5su3o Před 2 měsíci +1

    Hello! Where did you buy this carburetor? Can you send a link?

  • @CptMishMashVonRandom
    @CptMishMashVonRandom Před 2 měsíci

    Hey. Good video. I was wondering if the mounting face was the same size for the 4/5/6hp versions and this answers that.
    Had you tried the mixture screw? It's usually under an anti-tamper brass plug. I found it was screwed all the way in on one of mine that was having idling issues (from factory). The workshop manual states it should be 2.5 turns out and then fine tuned. That sorted my idle issue.
    How did you find the carbs performance long-term? Was it actually making any noticeable extra power? Thanks. :)

  • @Saver650
    @Saver650 Před 7 měsíci +2

    Thanks for the video. I have problems with the original factory 3.5hp carburetor. It hesitates going from idle speed to main jet and sometimes shuts down on main jet as well.
    Could you please share link to get the 5hp carb? Did you get the original Mercury /mariner carb?
    thanks

    • @ukmiro
      @ukmiro Před 7 měsíci +1

      If the new carburetor made any difference then it must have been negligible as the guy bought a 5HP Honda outboard later.

    • @ImranAli-lb2lf
      @ImranAli-lb2lf Před 4 měsíci

      Adjust the idle air screw . Run seafoam. Before storing run engine dry by shutting off fuel valve every time. Clean carb if that doesn't work. No need to buy new one.

    • @Saver650
      @Saver650 Před 4 měsíci +1

      @@ImranAli-lb2lf carb was cleaned in ultrasonic cleaner but still problem persisted.

  • @carlitodidthat
    @carlitodidthat Před 2 měsíci

    hey do you know if i can do this with a 2.5hp mercury?

  • @petermorse5442
    @petermorse5442 Před 5 měsíci +1

    The 5 hp carb is a scam, it is a piece of crap.

    • @motorikiller3150
      @motorikiller3150 Před 4 měsíci +1

      how do you know

    • @stevemac9298
      @stevemac9298 Před měsícem

      Do the 4-5hp carb not work then?

    • @DickerMax
      @DickerMax Před 9 dny

      @@stevemac9298it does work, but you won’t suddenly have 5hp. Bc the whole exhaust system is tuned to 3.5hp. The new carb can increase torque a bit, but won’t produce 5hp.