Wood Block Stamps to Cling Stamps - Craft Organization
Vložit
- čas přidán 24. 07. 2022
- Welcome to Crafts & Organization with Nancy and Michelle. Nancy shares how easy it is to turn your wood block stamps into cling stamps with a few tools. You'll be surprised just how much space you can save! Learn more at bestcraftorganizer.com/blog/t...
I have converted hundreds of wood block stamps to cling this year. I've watched many videos and learned something from each. Thank you for sharing. Here are a few things I've learned. StazOn ink, an alcohol ink, dries pretty quickly on the EZ Mount foam, but is permanent. If the foam doesn't come off easily from the rubber, microwaving for 6-8 seconds has helped me. I have also used a straight edge razor blade at times. To save on the cost of EZ mount by NOT using it for every stamp, I have often been able to remove the plastic image from the wood mount as well as remove the foam and rubber in one piece from the wood. I then put the plastic image on the foam. I trim the plastic and then paint on a thin layer of tack it over again and again temporary adhesive. It stays tacky so will cling to a storage piece of acetate as well as a misti. If not thoroughly dry, some of that tacky adhesive will come off onto the misti. (Easy to clean off with Goo Gone) . I have even stamped on thick plastic packing tape (when the image doesn't come off the block) and put that on top of the foam. Another tip (if you have the energy) is to run a ribbon of strong drying clear glue, such as "Crafter's Pick The Ulitmate water based super glue" from Hobby Lobby (8 oz for $5.49) around the perimeter of the plastic and foam. This helps keep the plastic adhered to the foam when stamping with your newly converted wood block to cling stamp.
Thank you for the wonderful comments and suggestions Dorothy. These are great and will definitely use them!
Thanks for this additional info!!! Sooooo helpful. I didn't really want to peel off the gray foam just to add more.... I have been able to use most and not have to use the EZ Mount foam. I used your packing tape method on some Wordsworth block stamps that doesn't have the adhesive tape label on the wood...it is stamped right on the wood. Using the staz on on the packing tape is genius.
I read the question about what to do with the blocks. Many I did throw away because it isn't safe to burn them since they have been treated. One idea I have used with a few favorite blocks is to make a "pressing tool" for my MISTI. I use a block that fits nicely in my hand and put felt on the bottom. I use the felt that is used to put on the bottom of furniture. It is strong and durable. I have some sheets of it purchased in a pack from Home Depot or Costco.
That is an awesome idea Dorothy! Thank you for sharing. I will have to give this a try.
The leftover wood blocks could be given to kids to play with.
"Buy more things" - Yes!!!!🎉
Thank you so much for your help and knowledge! I have thousands of stamps on wood. I will have to do this. Maybe now I will use these!!!
What a great Idea I store my wood stamps in a clear acrylic frame. I'm going to try this.
Thanks for sharing
We are so glad you liked it!
Another point I forgot to mention, I stamp the image with Staz-On Ink onto the plastic tape of sticky acetate, THEN after it dries, I attach it to the foam. If the original foam from the blocks is too brittle or is deteriorated, use the EZ mount method above.
Oh thank you! Game changer!
We are glad it helps!
Thank you for sharing, helps so much
Great!
Thank you!,!!!!
You're welcome!
Thank you both!
Thank you Debra!
If you microwave it 8 to 10nseconds it comes right off the nlack.
Thank you for a very efficient way to remove block stamps to cling stamps. I have found so many block stamps that I really liked but they are not user friendly for having to stamp a second time. I was able to peel the stamps off but then what do I do? Thank you for showing me a way to do this. Great video
Glad it was helpful!
Hi, because I absolutely loathe working with Eezimount because of how it ruins my scissors and penknives and you can never cut precise enough around the edge, i try get my stamp back to just the rubber base then I use a simple wind out school glue stick (like pritt) to attach it to my stamping platform lid. It then just peels off when done and the lid is cleaned with a quick sweep of a baby wipe.
Sorry if I missed it but what allows the stamp stick to the Misti for re-inking..
Good question, the gray backing of the EZ-Mount will cling to the Misit to allow for re-inking.
Where do you get the storage pockets?
Great video! I ordered the storage envelopes, but where do I get the stamp cards?
You can find the stamp cards at bestcraftorganizer.com
Great idea Nancy but what are you going to do with all the wood blocks now? Are they just going in the dustbin?
Hi Karen! I am not sure what I will do with them yet. I have them stashed in the garage until I come up with something. There has to be some type of way to reuse them.
Thanks for the great video! You make it look so easy to get the stamp off of the wooden block! What if it doesn't just peel off? Is there a method you used
...maybe undu or something else to break the seal? Or did all of your stamps just peel off of the wooden block like you showed?
Hi Lisa, Great question! All of the blocks in the bag did peel off pretty easy. However, if you have any that are being tricky, you can heat the block up in the microwave for 10 seconds.
What about a straight edge razor blade?
I'm guessing that a black archival ink would work as well..takes less time to dry. Thanks for sharing...I've used this method as well as putting the stamps in the microwave and coating those with Tack It Over adhesive. I also write the company name and stock number on the cling side of the EZ Mount or the raw rubber.
Yes it will! Great ideas for labeling.
Perfect timing. I just set up my craft room after not crafting for 3 years. I was wondering what to do with my old block stamps. I rarely use them because I do t see them in the box. Where do you get the stamp sheet to stick it to? And the pouches. I think I missed that
You can find all of the supplies at bestcraftorganizer.com/die-storage/
Thank you
Hello, I have a lot of nice rubber stamps that I would like to get rid of. Can you please recommend a good place I can donate them?
Accepting donations always for my placement group home for teens, art therapy is every second night with 15 girls.
You can get a receipt of donation if requested as well.
There considered treasures for other crafters at the Goodwill, Salvation Amy and other charity resale stores
What clear acetate are you using to stick your stamps on for storage? I can't seem to find any to actually attach the stamps to for slipping into pockets etc.
It’s at the end of the blog that’s attached. Stamp cards
How do you get the stamp to now stick to acrylic block?
The gray side the image is on will cling to the acrylic block.
Where do you get the storage bags, acetate for in the bags and the storage container?
Hi Lisa, the 6x7 Storage Pocket, 6x7 Stamp Card and the Acrylic Crate are all products carried by Best Craft Organizer. Here is a link to the webpage: bestcraftorganizer.com/paper-crafting/
Laminate!!!!! Don't waste money on the pockets, make your own pockets with a scotch laminator and MM of your choice ! Pennies a pouch and add a seal if you want even or button, snap or velcro. Slip a comic book board inside for clings and boom. Save yourself from handing over tons of money that's easily made by yourself with literally zero skills needed too. 👌
Wait! Do the recounted stamps come OFF the card?
Hi Julie, Are you wondering if the rubber stamps come off the Stamp Card? Yes, they do. The Stamp Card is great for storing your rubber & cling stamps, and easy to remove the stamps and place on a stamp block when ready to use.
Does anyone have any ideas of what to do with the woodblocks besides burning them or tossing them out?
I made reversible signs -Merry Christmas/Happy Thanksgiving. Tons of inspiration on CZcams. For the larger blocks I used Memories and more Christmas pack.
@@pattyh2410 I've seen the reversible signs before but I don't have a way of cutting out the letters. I've tried looking up ways to use them but most of the ways are signs which I have no way of making
@@twiztedletteslyou might be able to find some nice alphabet stickers. The signs are fun to make and make great gifts…and recycle to boot. Lol.