Service Tutorial K1 Series Replace the nozzle new version nozzle
Vložit
- čas přidán 25. 05. 2024
- Accessories purchase, Please contact our official email or website, remember to attach your machine type and accessories pictures
Official email:info@creality.com
Official website: www.creality.com
Any technical support in need, Please contact our official service email,remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture .
Official service email:cs@creality.com
Any inquiry of firmware and software,Please download it by creality official website:www.creality.com/pages/download
Creality firmware obtaining tutorial: • Video - Věda a technologie
Hey creality, when can we get a 0.2mm nozzle ? I have the one version. Ignore my comment on the other video.
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Что за смазка, после ее использования я смогу открутить сопло?
@@sergeyivanov3690 Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Whey do you heat up the nozzle before swapping it? My printer gives me an error when I remove the nozzle and starts to cool down as soon as I unscrew the nozzle
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
They are just retracting the filament which heats up the nozzle
I just want to change the nozzle, how can i do that ? Like just just the nozzle and not with the pipe thing
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Do You have to remove the ptfe tube from extruder before installong?
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Silicone grease? The printer I bought only came with metal grease.
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
My heatbrake didn't come out with the nozzle. What am I missing?
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
I tried doing this today and the nozzle got stuck when unscrewing. It broke eventually and now I have to order a new heater block.
Was the nozzle at 240 before you removed it?
Also did you make sure to hold the top portion in place with a wrench while loosening the nozzle?
@@random147555 yes and yes to the 240 questions as well. the screw only got stuck when it's about 2 cm out. before that there was some resistance but it unscrewed ok. anyway i got a new heat block and for the new one, I could unscrew the nozzle cold and it unscrewed without resistance.
i did a few prints and was able to do a nozzle swap with no issues.
It looks like thermal paste applied on the nozzle.
Is the creality K1 (normal) compatible with the new "unicorn" nozzle?
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)