Custom panel made for a 2001/06 F4i stunt bike. Ignition bypass On/off (kill) Start Fan override Headlight Accessory 12v latched Accessory 12v momentary
Dude yes. Another f4i content creator. There's so many 636 videos out there, but so little quality f4i vids. Subbed. Thank you. Still building mine out slowly.
Definitely something I saw when Yalu did the video overview of Vanessa I’m assuming. The red F4I. I just got my late best friends F4I. It was his stunt bike, it’s been sitting for about 8 1/2 years since he passed, and I haven’t done much besides looking up information on how to and such. But since it’s been sitting the gas tank had gas in it, granted his little brother put fresh gas in it and tried to start it a couple of years ago but it didn’t. The fuel pump wasn’t priming or turning on. So at this point in time, I’ve hand cleaned out as much as I possibly can, got a whole new fuel pump assembly from a friend of mine, got the KBS gas tank sealer and cleaner kit today, so ima start that tomorrow. Once that’s done ima put the fuel pump assembly in, some fresh gas and see what happens. It’s been hard trying to figure out what he’s done exactly, I believe the key was intermittent. But I did ride it the same week he passed away, while we were at the stunt lot for his memorial ride. So I know the bike used to run great in fact. Sorry about the rambling, but this bike is going to be forever with me since it has sentimental value and I wanted to start stunting, so after seeing your overview video on Vanessa, I was very intrigued with the switch panel assembly. I did already add you one Facebook, so I’m gonna shoot you a message on there, but I appreciate you doing this video. And I definitely do want to get rid of the key, especially since it’s not a bike that I’ll be riding around town like my regular 09 zx6r. So I like to just plug and play shit as best as possible. But I’ll shoot you a message over there and ask you a few things. I’m down in Florida. So shipping might get a little expensive 😂🤣 lmao
@@hojmacdonald bet. So far the battery was completely dead as well from sitting for years but the battery was replaced when his little brother tried to get it started but fuel pump didn’t kick. So I shall find out if it’s something else and not JUsT the assembly but that should be done on Wednesday at least. After the sealer is done. But I definitely want switch panel and starter button. I don’t need or want like 8 switches lol but like something for starting the bike, fan override, and license plate flipper lol. So if you are willing to help me out that’ll be amazing. And if you’re busy or something just get back to me whenever you’re free. I’m not the type to blow your shit up until you answer.
Thank you for the quality videos about the f4i definitely got a sub from me could you do an explanation of the headlight mod from stock to what you have on venessa or similar to that maybe a video or something would be great im sure im not the only one Curious about it in the process of building a f4i not many quality videos out there thanks man
That would be great man im subbed so ima be lookin out for it lol mine is stock faired and need some videos on how to make it naked and look clean if you need some ideas haha
hey mate Do you have a shop link that i can buy these kits at? Also im putting some lights on my 02 f4i. They guy i brought it off cut the wires off 2 inches after the 12 pin plug connection so ill need slice connect the headlight light wires back in, would you have a wiring diagram? or is it easier just to use a multi metre? I brought an oem left hand switch assembly so hopefully is not to hard to to wire up.
Hey man. I make all these parts in my small shop. I ship all over and also am more then happy to help where I can. I do 95% of my communication thru Facebook def add me up
I just bought my first f4i! It needs a little work. It doesn't have a key! How do I wire up a simple switch just to get me going? Which wires go to the switch and what do I do with the remaining wires? Btw your channel is nuts. I subscribed instantly.
BANC Boys that’s a pretty top of the line setup in the 350+ range But I make a ton of different options. If ya have Facebook find me there. Hoj MacDonald
Hello I do make them here at SwitchStylez. If you have FB add me there under Hoj MacDonald and send me a msg. I can get you setup ASAP. I use PayPal as it the safest for my customers
Dude yes. Another f4i content creator. There's so many 636 videos out there, but so little quality f4i vids. Subbed. Thank you. Still building mine out slowly.
Always my man. More coming soon.
Definitely something I saw when Yalu did the video overview of Vanessa I’m assuming. The red F4I. I just got my late best friends F4I. It was his stunt bike, it’s been sitting for about 8 1/2 years since he passed, and I haven’t done much besides looking up information on how to and such. But since it’s been sitting the gas tank had gas in it, granted his little brother put fresh gas in it and tried to start it a couple of years ago but it didn’t. The fuel pump wasn’t priming or turning on. So at this point in time, I’ve hand cleaned out as much as I possibly can, got a whole new fuel pump assembly from a friend of mine, got the KBS gas tank sealer and cleaner kit today, so ima start that tomorrow. Once that’s done ima put the fuel pump assembly in, some fresh gas and see what happens. It’s been hard trying to figure out what he’s done exactly, I believe the key was intermittent. But I did ride it the same week he passed away, while we were at the stunt lot for his memorial ride. So I know the bike used to run great in fact.
Sorry about the rambling, but this bike is going to be forever with me since it has sentimental value and I wanted to start stunting, so after seeing your overview video on Vanessa, I was very intrigued with the switch panel assembly. I did already add you one Facebook, so I’m gonna shoot you a message on there, but I appreciate you doing this video. And I definitely do want to get rid of the key, especially since it’s not a bike that I’ll be riding around town like my regular 09 zx6r. So I like to just plug and play shit as best as possible. But I’ll shoot you a message over there and ask you a few things. I’m down in Florida. So shipping might get a little expensive 😂🤣 lmao
Hey man. Sorry about your friend. I’m sure he would be happy to see the bike fixed. I’ll get with you in my msgs and we can get ya sorted.
@@hojmacdonald bet. So far the battery was completely dead as well from sitting for years but the battery was replaced when his little brother tried to get it started but fuel pump didn’t kick. So I shall find out if it’s something else and not JUsT the assembly but that should be done on Wednesday at least. After the sealer is done. But I definitely want switch panel and starter button. I don’t need or want like 8 switches lol but like something for starting the bike, fan override, and license plate flipper lol. So if you are willing to help me out that’ll be amazing. And if you’re busy or something just get back to me whenever you’re free. I’m not the type to blow your shit up until you answer.
THE RETURN FROM being ghost so long
Lol
Thank you for the quality videos about the f4i definitely got a sub from me could you do an explanation of the headlight mod from stock to what you have on venessa or similar to that maybe a video or something would be great im sure im not the only one Curious about it in the process of building a f4i not many quality videos out there thanks man
Thank you very much. I am always looking for new content so maybe a headlight video is in order
That would be great man im subbed so ima be lookin out for it lol mine is stock faired and need some videos on how to make it naked and look clean if you need some ideas haha
Sick brotha- content is dope and like the no nonsense delivery
hey mate
Do you have a shop link that i can buy these kits at?
Also im putting some lights on my 02 f4i.
They guy i brought it off cut the wires off 2 inches after the 12 pin plug connection so ill need slice connect the headlight light wires back in,
would you have a wiring diagram? or is it easier just to use a multi metre?
I brought an oem left hand switch assembly so hopefully is not to hard to to wire up.
Hey man. I make all these parts in my small shop. I ship all over and also am more then happy to help where I can.
I do 95% of my communication thru Facebook def add me up
I just bought my first f4i! It needs a little work. It doesn't have a key! How do I wire up a simple switch just to get me going? Which wires go to the switch and what do I do with the remaining wires? Btw your channel is nuts. I subscribed instantly.
Thank you a million. If ever I can help HMU.
I'll hit u up on fb when i decide to do this. An i subbed.🤘
Never saw this. Lol. 🦾💯
What does something like this go for? Have an 04 f4i would like a kit like this cuz I suck at electrical so a plug and play kit is ideal
BANC Boys that’s a pretty top of the line setup in the 350+ range But I make a ton of different options. If ya have Facebook find me there. Hoj MacDonald
Where abouts did u find the switch panels or did u fabricate them urself? If so could I order a set for my 05-06’ cbr I can venmo/PayPal whatever
Hello I do make them here at SwitchStylez. If you have FB add me there under Hoj MacDonald and send me a msg. I can get you setup ASAP. I use PayPal as it the safest for my customers
how do i order
Best way to reach out on FB or IG. SwitchStylez or Hoj MacDonald
Hey I want to know where I could get the harness for the ebay harness bypass
yo this is sick!! i have an 04 f4i and in the middle of building a stunt bike now. where you from?
Hello. I’m up in Canada. Been loading some new vids. Sorry I missed your comment
HOj SwitchStylez no worries man and I’m finally done the build.
Mehmet Carson how did she turn out
HOj SwitchStylez Mcarson123 on Instagram I’ve got pics there. I’ll follow back
Anything for 03/04 636
Glenn Cummings yea man. I’ll try and up load a old video
Just sent it for upload. It’s just a quick backyard vid.
How much n when can u install inbox me asap
Where ru located? If you are close we can meet up anytime
Lancaster pa
@@davebiggie1217 I am located in Canada
I ship all over and install is simple. I provide support if needed.
I wanna order this! I don't have fb but If you have IG let me know
You can find SWITCHSTYLEZOFC on ig as well as my personal Hoj MacDonald
@@hojmacdonald thank you
@@hojmacdonald sent a message!