Word to the wise: I can only speak for '20/21 TX 300s but the rear fender/tail light install on those bikes is a pain in the ass. TE's and TX's use different fender liners (back of the airbox), so don't expect the new license plate support (black thing under the tail light) to bolt right up on the TX. Nor is there a hole for the tail light wiring harness to pass through. Expect to do some cutting/modifying of the license plate support. And hope you don't discover this at midnight the night before a ride like I did.
Cool. Am considering one (harness and headlight) for a 2022 KTM 300 XC TPI. Looks like you installed a headlight listed for a KTM XC-W headlight. Is that correct as I have no headlight?
I have a 2010 Ktm 250 xcw last owner took the headlight off I bought an LED headlight off Amazon but it does not work when I plug it into the factory, wiring harness. I did check to make sure the headlight works with a separate battery and it does. Not sure if the light being an LED makes a difference. Any advice would be appreciated also anything I can buy to make it work. The bike was running when and I had the switch on
I have a 2021 KTM 450 XC-F and would like to utilize my BD Squadron Pro. I have a rectifier… does this run off the stator or battery? I have the OEM stator so it hasn’t had a rewind.
Just wanted to clarify that I have a 24v starting system so not looking to run directly off my battery (AG-401). I would rather have a rewind and run from the stator.
Do you have a harness and kit for a 2016 KTM XCF? I'm looking to get it outfitted for street legal. Do you know if the stock stator has enough Amps for this type of set up?
@@truenorthmotos9965 yes I just purchased it thank you. I was looking at your site about a month ago before and was going to call you guys to see if one was in the works. And saw the video said 300xc so I went on your site. Thanks , looking forward to installing.
Word to the wise: I can only speak for '20/21 TX 300s but the rear fender/tail light install on those bikes is a pain in the ass. TE's and TX's use different fender liners (back of the airbox), so don't expect the new license plate support (black thing under the tail light) to bolt right up on the TX. Nor is there a hole for the tail light wiring harness to pass through. Expect to do some cutting/modifying of the license plate support. And hope you don't discover this at midnight the night before a ride like I did.
We cut the under fender to make it fit on the 2020+ husky bikes and the wires fit between the fender and sub fender just like on the FE models.
Cool. Am considering one (harness and headlight) for a 2022 KTM 300 XC TPI.
Looks like you installed a headlight listed for a KTM XC-W headlight. Is that correct as I have no headlight?
Yes we did use an xcw light. We also have the Acerbis VSL light in stock which is better if you don’t need the hi/low function.
@@truenorthmotos9965 Thank you for the info & reply.
No problem.
I have a 2010 Ktm 250 xcw last owner took the headlight off I bought an LED headlight off Amazon but it does not work when I plug it into the factory, wiring harness. I did check to make sure the headlight works with a separate battery and it does. Not sure if the light being an LED makes a difference. Any advice would be appreciated also anything I can buy to make it work. The bike was running when and I had the switch on
Probably wiring. You need a rectifier inline with LED. Call or email me and I’ll help you figure it out.
Will this work for the SX models? Do they have the same stator?
Yes it will work on the SX-F models but not the two stroke SX models.
Where i can buy this headlight kit for xc 300 2021?thanks
On our website at TrueNorthMotos.com
I have a 2021 KTM 450 XC-F and would like to utilize my BD Squadron Pro. I have a rectifier… does this run off the stator or battery? I have the OEM stator so it hasn’t had a rewind.
Just wanted to clarify that I have a 24v starting system so not looking to run directly off my battery (AG-401). I would rather have a rewind and run from the stator.
It runs off the battery which the stator charges. You’d want a trail tech stator to run that light.
To clarify it uses a relay so it doesn’t pull power when the bike is not running.
Do you have a harness and kit for a 2016 KTM XCF? I'm looking to get it outfitted for street legal. Do you know if the stock stator has enough Amps for this type of set up?
Look them up and give em a call.
I'm looking to put a light on my 2023 ktm 125xc. Would this work on a 2023 or could it be made to work?
This one won’t but we have one that will.
@@truenorthmotos9965 yes I just purchased it thank you. I was looking at your site about a month ago before and was going to call you guys to see if one was in the works. And saw the video said 300xc so I went on your site. Thanks , looking forward to installing.
Appreciate the business.
Hello, any link where I can buy that cable for the lights?
Yes, at their website.
Hi my friend, do you know if this setup will work on my 2017 ktm450 xcf?if yes ,or you know of anything that will work can you please drop me a link .
Yes it will.
Can you please send me a link
@@marinojeffrey6693 www.truenorthmotos.com/store/tnm-ktm-relayed-lighting-harness
Do you have kit for 2023 ktm 350 xcf yet ?
Not yet. Waiting on some connectors from Japan for the new diagnostic plug under the seat.
Would this work on a 2008 ktm 250 xcf?
No it won’t. Feel free to email me at dan.north@truenorthmotos.com and I can help though.
Hi Dan do you ship to Australia
Yes we do. Email me what you would like and I’ll send you an invoice. Dan.north@truenorthmotos.com