Peugeot and Citroen Two Button Key Fob Repair and Battery Change

Peugeot and Citroen two button key fob repair and battery replacement. This is a cheap and easy way to refurbish your old key fob. It is compatible with Peugeot 206, 306, 307, 406, 407 and certain Citroen models too. Be sure to check your key for compatibility before buying one of these and DO NOT lose the transponder chip ! :). Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2020
Read important information below:
Disclaimer
Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Screwsnutsandbolts recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@lordphoenix7]

Damn, I was trying to change the shell of my key after 20 years, and the immobilazer was causing me problems for hours. Without your video I would have given up, since i had no clue about the chip...
Thank you for the video.

[@screwsnutsandbolts]

You're welcome, thanks for watching :)

[@gillbawden]

I have just done this also. I feel so daft for not knowing this so thank you SNB. I nearly got a mechanic out!

[@pinkfloyd110]

I love your videos. It has a very high educational quality. You say all the necessary things with subtitles and the viewer does not need to listen to B.S. I saw many videos. But your videos are the best. keep it up bro.

[@screwsnutsandbolts]

Thank you very much. I appreciate that :)

[@markwilliams2830]

Interesting and enjoyable.Thank you for sharing.

[@screwsnutsandbolts]

Thank you as always :)

[@niastevens9891]

Thanks for this video. What precautions do you suggest to avoid electrostatic damage (ESD) to the circuit board during handling?

[@lyftxempaa2541]

does the transponder chip need to be with the same board I have two keys and I'm just trouble shooting the locks and unlocks and if i swapped the transponder chip between them would it be functional at all (one currently has no unlock button but hte other one does not work when pressed now

[@vBDKv]

One of the micro buttons fell off mine, so now I gotta purchase a soldering iron as well. Sigh.

[@aryantoniodeoliveiraantoni2839]

Troquei a bateria do alarme do meu peugeot 207 mas não voltou a funcionar as travas.

[@andrew8394]

Thanks for sharing.😀😃😄

[@screwsnutsandbolts]

You're welcome !

[@basiunia67]

Dziękuję za pomoc pozdrawiam udało się

[@screwsnutsandbolts]

Thank you for watching !

[@kat7777]

Brilliant and thank you 🙏

[@screwsnutsandbolts]

You're welcome !

[@kat7777]

@@screwsnutsandbolts £4.63 off Ebay and your video saved me a fortune 💕

[@screwsnutsandbolts]

@@kat7777 Thanks for watching 👍

[@sknuralam8270]

Sir please fuel meter fault diogoness please sir

[@mojo888x]

Peugeot 406 ew10j4 Can a low energy key fob battery cause the ENGINE IMMOBILIZER FAULT message?

[@screwsnutsandbolts]

No I don't think so, the power to read the transponder chip comes from the car. As far as I know the battery is just for the door open and close buttons.

[@thelonewolf8023]

Could you show us please how did you trim the new key??

[@screwsnutsandbolts]

I didn't trim the key, I just swapped the old keyblade into the new case

[@GJoseph]

Do we need to re synchronize the key after change the battery?

[@screwsnutsandbolts]

I didn't have to

[@GJoseph]

@@screwsnutsandbolts thank you.

[@screwsnutsandbolts]

@@GJoseph You're welcome

[@pmarshall3130]

Mine did what you need to do is press both buttons together if it works the doors will lock 👍

[@quinten5993]

my chip is broken. i can buy a used one for 20 dollars. can i program it to the car?

[@screwsnutsandbolts]

I don't know if you can reprogram a used chip. You can buy a new chip relatively cheap but it's usually quite expensive to have programmed

[@user-dv8yu8tq4h]

I couldn't understand what you fixed? In total, you moved the board with the new battery and the chip to a new remote, is that it? I just have a problem with this Citroen remote control, the start button can be pressed but it doesn't do anything and I tried to change the battery + clean the board with contact spray, I would appreciate your help🙌

[@screwsnutsandbolts]

Does the button click when you press it down ?

[@pandypaduan6135]

I did the same thing with my citroen berlingo key and now NOTHING works. It sucks!! I only had one key and it don't start.

[@cingoHMC]

kamos bez tvojho videjka by som bol v prdeli,o tom imobilizery som nevedel a to som sa kvôly nemu hrabal v smetnom kosi👍

[@screwsnutsandbolts]

You're very welcome. I nearly made the same mistake myself ! 😄