How I made Glamrock Freddy's head (Part 2)
Vložit
- čas přidán 29. 09. 2023
- I hope this video has helped you in your crafting journey! Please tag me on anything you make as I'd love to see!
Freddy's FREE head files are here: www.dropbox.com/scl/fo/avq410...
Material list:
-PPE (a dust and fume mask, gloves, and long sleeves)
- Spray primer or car body filler primer
- Hand sanding paper from 80-800 grit (optional)
-Strong glue (I like to use superglue or two-part epoxy glue )
-Acrylic spray paints (you can use enamel but they tend to be more expensive and you can't use them on foam so I don't often buy them).
-LOW TACK - masking tape. I recommend 'green frogs tape' if you have the budget if not make use you get low tack.
-Clear non yellowing gloss spray paint (use right at the end of colouring the parts).
-Sponge / upholstery foam to fill the gap where your chin goes
- Two pieces of fabric elastic for either side of the jaw
If you have any questions I will try my best to reply [although I am just one person, please forgive me if it takes me a while or I didn’t see your comment!].
And again if you would like to see more NON-3d print builds please let me know in the comments. This and next year I’m going to really try to push my CZcams as it is something I’ve always wanted to do
More videos soon !!
Awesome tutorial as always :D
Wished there was a tutorial for the animatronic eyes, especially how to make them move automatically and randomly on there own.
That’s the secret sauce
czcams.com/video/s0av1qdiazU/video.htmlsi=yDRw3ZvjcaHDRLvO
@@JamalCorrieor da regular sauce
Yeah I was surprised that wasn’t included! I think it’s an arduino, 3d print, and toy servo setup like I’ve seen around.
I agree
I've updated the files to include the lower eyelids!
Hello! Will you ever have a tutorial on how to do the eyes/ movements? I'd love to know! Thank you so much your tutorials are great!
Yesss we need this
I’m with this guy ^
They would be EXTREMELY helpful
x4
I agree. Need that as well
Hey I was wondering could you do a tutorial for the eyes and the electronics
Yea same I wanna know how
I curious as well
Thanks for the tutorial, but what about the eyes? I have a 3D printer and have already started making Roxanne, but no one shows how to make eyes, how to animate them, how to make them glow
Same boat as you then, best of luck on your Roxanne as i try to figure out mine.. 😅
@@amandatippin9539 Ooo, good luck to you too
Yes i am making glamrock bonnie but the eyes are still how do they do it
I agree I would love to know how to make the eyes
Thank you so much for this! One of the best FNaF tutorials out there, for real. I would love a tutorial on the electronic aspects as it's not exactly something I see people offer and I would totally pay for it on Patreon if it was available.
Would love to see the foam tutorial too!
Can’t wait for the eyes tutorial. I need it so badly🙏
Two big questions I have!
Could be get a more in depth on how the jaw attachment process is?
my even bigger question is… THE EYESSSSS!!! I’ve been looking everywhere 😭 between the movement and the LEDs I’m dying to know how it’s done!
Thank you for these videos and you really do inspire a lot of us!! This video alone has got me to start making my own Freddy head 😂 love what you do!!!
If I make the eyes myself, I will definitely show a tutorial, because apparently eyes for cosplay are a huge secret
And the head model itself has many bugs, but at least it’s free :|
@@mariklove_3D we are actually in the process of making all the glamrocks for an up coming short film we are doing with a few other production company's. All i can say for the eyes are you will need a lot of electrical component's, i have seen first hand everything that goes into it. and you could find tutorials on how other people make them, but you are going to run into issues such as, Having to manually control the eyes yourself through a remote system when you need your hands to be free. You said it yourself, eyes are a huge secret in cosplay, people do not like "revealing the magic" but My advice is do a lot of research, and find people who have Electronic Knowledge for mechanical stuff like this. another option would be reach out to a hobby store that sells RC parts. the eye designs we went with require 4 smaller servos, which rc stores sell the parts you'll need.
One question? Did u say what website you used for the 3d designing model?
Now we're waiting for the whole costume
How do you make the robotics for Freddys eyes?
Damn, all that just for the head. I can't imagine what it cost to make the whole body.
Congratulations for your amazing Freddy 👍
Thanks so much! I love seeing how creators and artists make their creations!
I’m looking forward to the tutorial on his eyes!!!
Thanks for sharing a tutorial in long form. Definitely interested in the animatronics eyes tutorial! Hopefully it comes out soon 🙏
Would be cool a tutorial for glowing eyes, i really want to see how those eyes are made
I would definitely like to see an eye tutorial!
Will u show how to do the eye electronics?
How did you make the eyes? I presume they follow your eyes' movement?
*My favorite charecter too😩❤️*
This is amazing! As others have said I would LOVE an eye tutorial! Thank you so much for releasing these files for free!!
Thank you for this terrific tutorial! It's always a joy listening to your wonderful voice! 😍🥰🤩
thank you so much for the tutorials!! i definitely will be making this in the future once i get the supplies necessary! ive always wanted to make one of these on my own, and now it finally seems possible! thanks again for this amazing vid!! 💖🥰
Amazing tutorial Jem i really enjoy seeing how you create everything and all the work that is involved in your creations i look forward to seeing of your creativity ❤❤
You have no idea how grateful I am for you making this tutorial of glamrock freddy. Cosplay has always been a dream to me since I first saw him now I can oficially get started on making a dream come true.
Excellent tutorial...Please document your progression towards better ideas. It is part of the process, and a fundamental part of everyone's journey.
Soo cool, I also love seeing the stuff on the background in your house too haha
Wow that's awesome 👌
Beautiful ur so talented
Thank You For the Tutorial It Really Helped me out
This has been my dream to make and now u made it come true!! Tysm😊
Can you please do a video showing how you did the mechanics for his eyes, I’m making a chika costume based off your work!
what an incredible CRAFTMANSHIP!!! you are amazing!
Key to Freddys head is sanding, sanding and *Looks in notes* sanding 😄
Nice Video, Love the test wearing 😄
Wonderful, you are the best
thanks for the .stl's and the tutorial loved watching you put together Glamrock Chika and have almost finished printing my Freddy just top parts of the head left to go. also love how you made this for 1MIL subs and not long after you have an extra 600k lol congrats you deserve it.
now on to my question in the files can you include a printable file for the paint template that would be incredibly helpful if not that is fine.
also cant wait to see how to set up the eyes even something to hold them in place
keep up the good work 😁
Nice Glamorock Freddy cosplay do a good 👍 😊 job
I love tutorials on 3d prints and stuff
I’d love to know how you made the eyes! 😁
This is amazinggg! I'd love to see tutorials for foam modelling if you ever use that!💖
very well done ☺need more long-content in general here
Please do a tutorial on the eyes, the mechanism and how you put leds in it.
You have inspired me so much to making these i think You sould make roxane wolf next❤❤❤
Loved this. Can you do a foam tutorial aswell cuz i don't have a 3d Printer 😂
So cool!
How are the eyes made? That's the main thing I am a little iffy on.
AMAZING!
Incrível ❤️
Hi. Could you make a video talking about how to make the eyes move?
For example, when you wear the mask and move your eyes to the right, will the animatronic eyes do the same? Tell us more about it and how you did it, please.
A foam version would be awesome!! ❤
KEEP UP THE GOOD WORK AND I COMMENT NOW BEFORE THIS BLOWS UP🎉🎉
Thank you for the tutorial!! I’ve been dying to know how to make one of these for myself to wear, this is awesome!! I would like to know more on how to make the head rest (i think thats what its called?) fit inside Freddy’s head. Thank you so much again!!!
As a small creator who finds it hard to post frequently I find you amazing
This is very cool, great job on the sanding and painting. If you ever find the time to make a tutorial on the electrics that would be greatly appreciated.
Absolutely AMAZING!!! Would love to make one of these some day, though sadly I don't have a 3D printer... So seeing another version that's non 3D printed would be interesting to see. 🧡💙🤎❤
I'm curious about the eye mechs and another piece, is the hands with pull tabs, if thats possible for a vid or some information on that for me to use for my Roxanne build.
Would love to see how you put in the LED eyes and what they are made of
You are the best
This has helped so much!😍
Thank you I am working on my glamrock Freddy head right now with this video to help me!
God bless you❤
OMG IM SO ANXIOUS TO SEE MY BOI FOXYYY
Idk who's that cosplay you're doing but I'm her bc your stunningly beautiful and you're on fire with that hair ❤
Do you plan on making a tutorial for the rest of the body?
A few questions
1:will any hot glue work?
2:what kinds of 3-d printers do you recommend
3:how do you do the robotics to make the eyes and mouth move
4:where can I buy everything
5:is there anything else to use for the paint that’s not toxic and cancer causing
6:what sander do you recommend
Thanks in advance
We going to the fnaf movie with this one 🔥🔥🔥
Thanks sm for the tips! I’m even more exited for the eyes and also could you do a tut on how to make a vanny head?
If printing in pla, be careful not to ever leave your curing parts or finished pieces in direct sun or summer heat for too long! Ive ruined prints by not taking the suns path into account while curing outdoors, they basically start melting. I think ill do this kinda stuff in petg when I get started for the added robustness!
So i first spray the body filler then start sanding multiple times right? But a quick question, how do I know when to switch sand paper and then stop sanding?
Impressive
Noice!
I hope they hire you to help build the toy animatronics for the second FNAF movie. Your stuff is CRAZY accurate and straight up amazing
Now we just need to know how to do the eye mechanics
What did you do to make the little panels cutouts above Freddy’s cheeks? Did you use a rotary tool or a soldering iron etc?
Also what paint brand and colour did you use for his snout?
Btw love your work and thank you so much for releasing the files 😁
i love too see sundrop costplay in the future pls
Great tutorial and great cosplay! I would like to order from you
you are so amazing!!!
What spray paint brand did you use?
Don’t be the best, be yourself!
Never heard your voice but its cool
ahh, can you make a bit more in-depth tutorial about how you made the eyes?
So i finished the head and it looks amazing and exactly like i dreamed of!
But now after making the head, i want to print out parts for a suit so i can make him complete but i cant find any proper tutorials or printable files for it so i was wondering if maybe someday you can make a full body Freddy Fazbear and make a video on how to make it and also share files for it 👉👈
Tysm though this is the best cosplay tutorial i have ever seen
How did you do the paint fading from the eyes. Looks like you made it fade from white to blue. Airbrush? Because i only get these damn paint sprinkels if i try it with a spraycan
nice
Outstanding work! Hoping you will try FOXY someday! 🙂
you are greeeeaaaaaatttt!!!!!!!!!!
thanks for theaching
Wondered if you ever considered going a league further and attempt to make a nightmare animatronic? :3
Thank you so much for making this tutorial! It really gives a kick start for such unexperienced cosplayer as I am xDD
Please could you do a tutorial on the eyes? ☺
Will there be a part 3?
It would be interesting if you could finish the whole ,,Glam look" like all and everything. You have the head now so maybe next could be the body too, so then you have the full version of Glamrock Freddy
You should make Glenrock Bonnie
Nice! Keep uploading.
Hi jem which gloss spray did you use? I can never find one that is non yellowing even when it says so on the can. ty!
Well done, Superstar!! Could you make a tutorial for the eyes on how to make them glow, blink and move?
Super cool!
I do have a question though, how are you seeing out of the costume? are you looking through the mouth?
Bro how do you make those led light in his eyes light up, that’s the biggest question I have and need to know how it’s done
Hey I'm a big fan but I don't have a 3d printer can u make one without it and maybe a tutorial I'm subbed BTW ❤
Pac-Man with his job moving as a Robot
The video is incredible, I'm thinking about printing my Freddy, could you make a tutorial on how to make the eyes and lights mechanism?
“Way to go, Superstar!” I hope you, Da-Regular Sauce, and the other two cosplayers who did Roxy and Monty can get together for a group cosplay, especially if someone could do a Daycare Attendant and someone else still could buy an old mall and convert it to resemble the Mega Pizzaplex (though the last one would be a heck of a pipe dream).
i'm hoping on making a Sun mask that can rotate with a fidget spinner
@@ThatDigitalDemon that would be awesome
I have a question concering the eye lids for the eye frames there isn't a bottom eye lid for the eye frame in the dropbox file do we print the same eye lid twice?
In the spirit of CZcams, could you please make a top ten tips / things I wish I knew before video? (Though I appreciate you're very busy.)
I used to watch her on tictok, since thats a chinese spy app i deleted it and now i watch her on utube. Im glad i watch her on utube now because i can listen to her talk which i could do all day.
❤