How to Correctly Hang a Drape at Home | Pottery Barn
Vložit
- čas přidán 22. 08. 2024
- Drapes are important elements of your home décor. A perfectly hung drape creates an attractive aura in the room. This video demonstrates how to hang a drape perfectly. There are a few hardware items needed to mount the drape, which include a drape rod, measuring tape, pencil, a handheld drill, draping rings, a screw driver, and other mounting hardware.
To mount the drape rod, it is important to first measure the width of the window. Always allow 2-3 inches of space on each side of the window for the drapes to open fully. Drape rods are usually placed four inches above the window, but if you want to add height to the room, you can place the rod close to the ceiling.
Once you decide where to mount the window hardware, it is important to check the levels correctly, using the carpenters' level. Next, hold the mounting brackets to the wall and mark the location of the screw holes with a pencil before drilling them. Fix the brackets using a screw driver and mount the drape rod for a perfect look.
Did this video help you hang your drapes? Let us know in the comments below.
To explore further, you can visit our website www.potterybarn.com
To order Cameron Grommet Drapes, visit
www.potterybarn...
"Attach finials to the end of the rod. Your drapes are now mounted..." But they are not. How are the curtain rings used? I came looking for that specific detail, but alas, your curtains magically hung themselves--a power most of us do not have!
It's so easy. If you buy curtains from them that are meant to be hung by rings (without clips), they will come with curtain hooks. Those hooks slip through two plastic "fishing line" strings in the header of each panel (the flat part of the hook goes under the plastic lines). You'll see every 5 inches or so two little plastic lines peeking through the fabric. Once you've slipped the metal hook under those lines, they then hang directly on the smaller ring of the curtain rings. Promise, it's easy and it comes with a picture diagram.
@@hdb80 mine did not come with metal hooks?
@@TheJunierBug I would call them immediately. Is it a Pottery Barn curtain you bought? Or is it another brand? If it's another brand, you can buy hooks on Amazon that have a sharp end meant to pierce the fabric and you can put them on the header however far apart you like.
You can even use rings and clip them directly onto the curtain panel
@@tracymasters4817 unless the curtains are super heavy like my linen ones..
That's not how to hang drapes; it's how to install a curtain rod.
Saber Cayenne um, I do. Thanks tho.
I just spent time I could have used unpacking boxes watching a video teaching me how to do something I’ve already done. I want to HANG MY CURTAINS on the already installed rods. I’m not interested in watching how I should have done a job already finished.
@Stella Grace Wow--how old are you?
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
I purchased the same drapes and was hoping to hang them by the loops on the back, however they didn't come with loops on the back as advertised. They came with metal things that slide into the drape and you hang metal clips from. So, there is no hanging loop. No one at the company seems to understand this or be helpful. I'm unhappy. I was looking forward to these drapes working.
This is how to hang a curtain rod, not how to hang the drapes.
no one talks about putting the drapes on the rod and then holding it up to check where you want the curtain bottoms to land. Right to the floor, an inch or a few inches above the floor.......etc. Hmm.....
Exactly. I have been Googling to find out how high I need to place the rod (with rings& eyelet) for 105 inch long drapes. How do you calculate that with all these variables??
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
I'm a designer, rule of thumb is 1/4"-1/2" above the ground if you are not "pooling" the fabric. It keeps the fabric clean and omits an unsightly gap and the bottom of the drape.
Need help with height too. How much length do the small rings add? Also, since I'm using the drapery hooks to attach to the back of the curtains, do I use the bottom 2 threads or the top 2 of the 3? Pictures look like the top 2 but I'd like that in the instructions. I'll look for other videos so I don't have to hold up the whole thing to determine height
Very disappointed with the instructions that came with this rod and drape. And the fact that you can't find a step by step video to hang the drapes is unbelievable. I got the double rings and Seating curtain but can't figure out how to attach them with double rod. For what I paid I expected alot more
Very Good video. Love PB!
This is how to install a curtain rod, not hanging drapes.
Pottery Barn screws were too long and wouldn’t go in flush with the wall. Stripped the screw head. Same with anchors. Anchor stuck out 1/2”. Huge hole now from oversized anchor. Going to watch plastering holes video.
Oh, wow.
Am I the only one that thinks that the music is way way way too loud? More instruction, less fluff
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
I agree, this video does NOT tell how to hang a drape. No where is there mentioned what measurement to use for rings with clips! GRRRRRRRRRRRR I am trying to figure out how high to hang my drapery rod. This does not tell you this!
Penny Ellis Simply change the title to "how to hang a curtain rod" and this would be fine.
Penny Ellis there’s no hard fast answer to that. You gauge Depending on the length of curtain, and where it will land on the floor. I go 3-4” above window & leave 3” on the sides so the curtain doesn’t block the view.
Thanks for the video.
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
Very helpful, thank you.
Very informative video. Nice Tips..!! surely going to try them. Thank You so much !
How do you know how high to install the brackets. Like if you already have a drapery pre made?
Measurements. Iasure from the hanging "device" to the ground. So if using rings, or by a pocket in the curtains, or tie tabs, etc. Meaure from the top of the hanging device to the bottom of the drape and add no more than 1/2". That is where the top of your rod should be.
sve je to dobro
good vedeo mam. thank you.
I'm installing on dry wall and i do not know how to put the little plastic things where the screw will sit in.. How the fuck do I do it with out breaking them? I hate curtains
+xtmg2010x Drill a hole in the drywall big enough to fit the "plastic thing" in. Then push it into the hole. When you drive the screw into the "plastic thing" it will expand and grip into the drywall. By the way, the "plastic thing" is called an anchor.
+Adam Hall Thanks, I figured out how to do it after all. I just raged a little, went to the store to big better "anchors" boom. Curtain install👍
Adam...you're too nice.....
I have a very deep set window, with a large wide windowsill. The windows themselves are around 84 inches tall and the window goes in about a foot from the actual wall. I live in an apt bldg that used to be a factory, we're not allowed to nail anything into the walls (which drives me nuts) so I'm using a tension rod. No idea whether to hand the curtains up against the window or away from the window which would leave a cavern between the curtain & the actual window. uggghh
Ikea sells tension rods, maybe you could email them with your problem and include some photos so they can see what you're working with.
The music is way too loud and the woman's voice is very hard to hear. Pottery Barn, you need to check your videos before releasing them onto CZcams. The audio for this video is terrible.
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
Yea, this was absolutely no help at all. It’s about putting up rods, not how to actually place curtain on rings
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
The curtains come with curtain hooks (little silver metal hook things. Those slip into plastic lines on the back of the curtain, and then you sue the metal hooks (now attached to the curtain panel) to hang over the metal rings.
Nice instructions here - but hopefully, you've figured it out by now... czcams.com/video/wG7RMv1evFg/video.html
Thanks!
Call this how to hang a ROD, I need to know how to hang the DRAPES.
Where were the materials purchased?
This video should about to drapery put to gather not how to hang on wall
It's simple, Just go to woodprix page - click the start button and make it yourself.
hello dave
What do you use those plastic nails for ?
Those are anchor screws. They are used BEFORE you put the screw in. The screw actually fits inside those anchors. It's used in case you can't drill into a wall stud. It makes the bracket more stable and secure in the wall.
grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
This was not helpful at all!!!
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
After 46 seconds y’all lost me, with 87 supplies needed.....
Honestly, what did you expect? Elmers glue?!
Belas
lol wow some of these comments are tivial
No, that's not overly simplistic!
Well, that was a terrible video! Literary nothing shown on how to hang the curtains.
this is really bad! Tired of dumb music