SECRETS OF INSTALLING A CANAM RADIATOR RELOCATION KIT HOW TO
Vložit
- čas přidán 20. 10. 2021
- Wish I would have know these simple tips and tricks on how to install a radiator relocation kit on my Canam Renegade prior to doing mine own. Video gives 10+ tips on things I learned from installing my radiator relocation kit on my Canam Renegade. Hope this video helps someone during the install of their own radiator relocation kit on their Canam.
🚀 CHECK OUT MY MERCH!🚀
hanginwithpa.com/
"and that's just another day hangin with your boy PA"
Remember to like, comment, and subscribe 🤘🏽💪🏽🙏🏽
🚀 AFFILIATIONS🚀:
Save 15% with below link:
www.nilight.com/?ref=r0ijplp09w
Use coupon code to save an additonal 5%:
hanginwithpa (all lower case)
❤️ STAY CONNECTED
TikTok: vm.tiktok.com/ZMJmSUcug
Instagram: / hanginwithpa
Facebook: / hanginwithpa
❤️ SUBSCRIBE
czcams.com/users/hanginwithpa?...
🚀 WANT TO SEND ME SOMETHING ???
PO Box 521 Scott, AR 72142
🚀 RECOMMENDED PLAYLISTS 🚀
✅CanAm Maintenance How-To's:
• CanAm Maintenance How-...
✅CanAm Mudding:
• CanAm's Mudding
✅Everything CanAm Related:
• Everything CanAm Related
✅Product Reviews:
• Product Reviews - Auta a dopravní prostředky
You can mix antifreeze colours no problem. Years ago, the green wasn't as compatible with all the aluminum in the newer vehicles, but now it makes no difference.
Good to know thanks
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
Thanks Dr for watching 🤘🏽💪🏽🤙🏽
Hey bud could you do another video maybe of how to purge the coolant system after the install before cranking the bike . I see a lot of videos of how to change radiator or add a relocate but no one ever mentions you have to purge the system before you can crank the bike .
All I did was open the cap and let the bike run and spit out the coolant. Did that couple of times, and was good to go
What’s the name of your relocate kit? It fits well on the bike. I’m trying to decide which one to go with.
It’s the OEM CanAm kit
Where did you get the vent cap for the rhino snorkel hood? I've been trying to find one in the manta green color like the one you have.
START OF CANAM RENEGADE 1000 BUILD - HORN COVER MUD DIGGER MOTORSPORTS
This video is on my channel, with the direct link I believe.
Mud digger MOTORSPORTS.
@@HanginWithPA ok thank you for the information
No problem 💪🏽👍🏽🤘🏽
What size hose clamps to buy?
Forget the size I took the clamps they gave in the kit to a parts store.
I got this kit today for my renegade but I don’t see the template to cut for the hoses in the box. Where was yours at?
I just measured them how I want them ran, i can’t remember if a template came with it
@@HanginWithPA thanks!
Where did you get the cover for the front of the radiator?.
Outlaw concepts video on my channel with all his information
Good video, thanks for sharing. My opinion- I'd stick with the clamps it comes with, especially if they are stainless. The gear style clamps will work but you risk overtightening them and the amount of movement going on will eventually cut the hoses. The oetiker clamps are very reliable if installed correctly with the tool and, I'd never use a zip-tie on the cooling system unless you know the plastic can hold up to the sun, heat and cold cycles. They do make stainless steel zip-ties if you have to use one.
Thanks for the feedback 🤘🏽💪🏽🤙🏽
Any regrets rad relocating the Rene' and the 'Horn? :X
Nope, only regrets is wish I did it sooner.
@@HanginWithPA Where does one find custom fabricated and powder coated covers for a factory relocate kit - like that on chump?
Outlaw concepts video on my channel for his info
Which kit is this?
Factory CanAm kit
You need to do more deep cleaning so those hoses aren’t so dirty! Hope your wife’s look better than that! 🤣🤣🤣🤣🤣
👀👀😳 hahah