CAN AM Rad Relocate Kit : Quick video how I installed it
Vložit
- čas přidán 31. 07. 2024
- I made a video on how I installed my CAN AM Rad Relocate.
It took a while to complete. I took the plastics off, but dont think I really had too.
The scariest part was drilling the 3.5" holes into my plastics. They were easy to drill and I measured properly where they go. There were NO issues with doing that.
If you have any questions let me know ...
This is how I did the install - It might be 100% right, but it may not be, so use this as entertainment or if you want, some ideas how to do certain parts of the install
check out my instagram: @garnders_garage - Jak na to + styl
thats when you realize how dirty your machine is...when you start taking off the panel lol. nice video i enjoyed it. did one for my can am
awesome video man! well put together!
Great vid! Just wish it was in more depth as far as coolant routing and which bolts go where. Mine didn’t come with any sort of directions, and I’m making due with common sense. But it’s not that easy this way 😂
Question. To remove the black plastic part that holds in the lights would I have to remove the top plastic ? Hit a pole the other day now I have to replace the " front facia" 😥
What's your preferred method for coolant filling? Do you raise the ass end?
Did it come with a template on where to drill the holes
I’m about to do one on my 2019 570. The only part I’m nervous about is drilling into my plastics. I was thinking about running the hoses through the gauge pod assembly because that’s only $30 if I want to replace it
Jake Spangler I wasn’t going to put the rad locate on because I didn’t want to drill holes. But realized if going thru mud it is a must.
The holes don’t have to be exact As long as they are close to what dimensions are mentioned It was quite easy
Im going to start mine on my 2019 570xt tomorrow. Was there anything that left you confused? Or does jt all go pretty smoothly. How many hours did it take you?
if I was to do it again, it would go smooth. I took off more parts then I needed too i think. Was time consuming but not too hard.
What did you do with the stock cooloant resivoir ?
I'm guessing he kept it... 😏
That was too much unnecessary parts removal, I only removed the top part of the struts to get to the nut that holds the fan and pulled it out, i didn't have to remove nothing else
Looking full a FULL video in real time....not 2 hours of work in 7 minutes
Guess you’re in the wrong place. And it was 4 hours of work in 7 minutes.
just get an xmr
Xlm is too stiff. Great for mud, but not much else.
The thing about these videos nobody makes it clear on where they put the piping that came with the kit that's so annoying and frustrating the directions sucks as well
don’t give up your day job……..
Whaaaaat? Why? It turned out perfect. But I won’t
Only gave thumbs down because some steps were missed, and as i followed. I missed them too. But decent video for the most part
Thanks for the thumbs down! you didnt have to leave a comment saying that though. Cause I dont care.