With the pellet clip the co2 peirce needle i noticed some that are round and some that are slightly bent in instead of being a circle like a peircing needle or weirdly shaped. Not sure what to make of that.
Hi thank you for the video. Which oil do you use to clean your Glock? my Glock 17 gen 5 has only a dummy switch to remove the slide. The switch does not move. How do I remove the slide?
me and a friend of mine got 2 vfc glocks 17 gen 5 like yours, and nearly the same time our trigger spring broke and on the hammer unit that moving thing that you sprayed first in your video, it cracked the corner due impact while shooting
bro i have glock 45 umarex and i am god damn scared that it will broke after i remove slide or i just hit slide back to hard an it will brake... should i be worried about this or are they hard to broke?
I have the same glock as you and im not a expert in airsoft guns i just got into it like a year ago but is it normal that the barrel is loose when i pull the slide back or should it not move?
Hey, I have a question, my glock has a small problem where at times my glock's magazine would drop out of the gun for no apparent reason. Have you experienced anything like it? Do you know a fix for it?
@@alexkwan959 I realise this is late, but could be you haven't got the right grip attached. I kept squeezing the mag release by accident because I didn't have it set right. My WE G18c came with two pin-on sections for the grip which made it bigger but I ignored them... I shouldn't have.
Man I've got a WE Tech G26 and for the life of me, I cannot get the slide off. It moves about an inch forward and just stops. Any suggestions? Really clean video mate.
@@AirsoftNLD oke, zou deze goed zijn denk je? www.airsoftneeds.nl/winkel/protection/onderhoud-protection/airsoft-silicone-oil-spray/ En wat is dat grijze in het tubetje?
Did mine today, gave it a thick layer of oil, much thanks bro!
Haha dat was snel, thanks man
With the pellet clip the co2 peirce needle i noticed some that are round and some that are slightly bent in instead of being a circle like a peircing needle or weirdly shaped. Not sure what to make of that.
Hi thank you for the video. Which oil do you use to clean your Glock? my Glock 17 gen 5 has only a dummy switch to remove the slide. The switch does not move. How do I remove the slide?
Would this work for a g34
But very helpful :)
I did messed up the tiny spring now looking for a spare part
what lubricant do you use
what oil do you use?
Hi I do not get gas in the cartridge what I need to do the gas is co2 thanks Ilan
My problem is that I wanna know if it supports previous gen parts because I wanna buy one and make sure I have extra parts.
Wrong adres im affraid i dont swap parts or internals sry m8
me and a friend of mine got 2 vfc glocks 17 gen 5 like yours, and nearly the same time our trigger spring broke and on the hammer unit that moving thing that you sprayed first in your video, it cracked the corner due impact while shooting
anyone got same problems?
Never had this problem sry
Hey how do you change the outer barrel to add a threaded one
Guess u buy an intire in and out barrel u can remove inner tho with screw driver
Amazing video very easy to follow along and great explaining with what to do my glock replica is smooth af now thanks to this video
thanks and welcome :)
@@AirsoftNLD I play airsoft 2 times a month how often should I clean it
bro i have glock 45 umarex and i am god damn scared that it will broke after i remove slide or i just hit slide back to hard an it will brake... should i be worried about this or are they hard to broke?
they will break any way so yeah u can remove the slide. wont break for that but after while shoothing months/years it will def break
I have the same glock as you and im not a expert in airsoft guns i just got into it like a year ago but is it normal that the barrel is loose when i pull the slide back or should it not move?
Outer barrel moves when slide is backwards
@@AirsoftNLD yes
@@BandoFrags thats normal if the outter barrel moves but not inner barrel
Yes thats normal indeed
can i use silicone oil on the seal of a co2 cartridge when i puncture it to keep it lubricated? or is it bad or is it needed?
I always use silicone for that
Hey, I have a question, my glock has a small problem where at times my glock's magazine would drop out of the gun for no apparent reason. Have you experienced anything like it? Do you know a fix for it?
I dont know how to fix that sadly i never had it with glocks but i did with 1911 prop the mag u can try yo fit another one but no gurantee lol
@@AirsoftNLD yeah I think it's the mag's fault too. Thanks anyway I guess I'll just buy a new mag
@@rayp.8364 u can always bring it to the store i guess try if if thats it?
I've had that problem at the start but that's because I didn't put enough force to secure the lock with the gun. Maybe give that a try
@@alexkwan959 I realise this is late, but could be you haven't got the right grip attached. I kept squeezing the mag release by accident because I didn't have it set right. My WE G18c came with two pin-on sections for the grip which made it bigger but I ignored them... I shouldn't have.
Can you show me its rocket valve?
Why you saying paper like that bro 😂 good video btw appreciate it
Cause im not a english speaker
Man I've got a WE Tech G26 and for the life of me, I cannot get the slide off. It moves about an inch forward and just stops. Any suggestions? Really clean video mate.
Idk my opinion is that WE sucks i cant give advice i dont own any of them anymore
Excellent video comrade. Could you use some oil with silicone?
I think oil for airsoft guns are meant to have lube in them
Can i use the video for a Gen4? Are they internal basicaly the same?
I do not understand your questions
@@AirsoftNLD i have a Glock 17 Gen 4 by VFC, do the Gen 4 and 5 differ internaly?
Yes
Kan de dove tail iron sights er ov met dat schroefje?
zou ik niet weten heb alleen originele onderdelen erop.
mvg
@@AirsoftNLD hmm dat word zelf even uit zoeken. Blijft een gaaf model en wil die van mij aardig mint houden
Ok.. thanks for showing me how to take it apart but bro.. the cleaning and the amount of oil…. 😮
Gebruik je siliconen spray niet in de inner-barrel? Is dat potje vet hetzelfde als Teflon grease?
Nooit barrel doen met oili of siliconen lol
Oké thanks. Ik lees ook veel dat Teflon grease slecht is voor je gun, gebruik jij na silicone oil nog wat anders voor bijv de randjes van de slede?
Gewoon nuprol service kit ken teflon niet nuprol verkoopt service kits met alles erbij
@@AirsoftNLD thanks. Krijg vandaag me Glock 17 Gen 5 binnen! Kan niet wachten🤪
Nice gen 5 zijn wel lekker
What is your favorite glock?? Gen?? I wanna buy one ... thanks
Glock 17 gen 5 or glock 45
@@AirsoftNLD I buy the 45 gen 5 thanks bro
What oil are you using?
101 inc maintenance kit
my glock upper wont come off what should i do
U gotta rack slide first then push the 2 pins on the glock down
what lube do you use?
Nuprol
what lube u using?
Today 101 inc
Why would i “clean” an airsoft gun ?
Hey hoe heet die olie? En waar kan ik het vinden?
Gewoon airsoft oili ik gebruik verkeerde
@@AirsoftNLD oke, zou deze goed zijn denk je? www.airsoftneeds.nl/winkel/protection/onderhoud-protection/airsoft-silicone-oil-spray/
En wat is dat grijze in het tubetje?
@@lars7666 dat tubetje was bij mij siliconen vet. ik gebruk verkeerde oili moet keer goeie kopen maaar die bus is oli die tube is siliconen vet
@@AirsoftNLD dankje voor de info, waar moet ik dat vet aanbrengen?
@@lars7666 zoals in video op bewegende delen en o ringen
What is that a real gun
Het gen 5 handvat is minder lekker dan van de gen 4 of ben ik de enige die dat vind
Ik vind juist gen 5 beter hehe
Very rough
Worst field strip i have ever seen! LOL
Yy