Video není dostupné.
Omlouváme se.
3D Texture Maps, What are they and how do you use them ?
Vložit
- čas přidán 8. 03. 2017
- #3DModeling #3DAnimation
In this video I will explain the different types of 3D textures, what they are and how they are used.
A few of them in the video are Bump map, Displacement map, Normal map, Curvature map, Specular map, Ambient occlusion map, Diffuse map, Albedo map, Height map etc etc.
CHECK OUT MY SPONSOR REBUSFARM:
bit.ly/2bRTbhx
MY CHANNELS
MH Tutorials
CZcams 3D Modeling & Animation Tutorials :
/ mikehermes65
MH Tutorials 2
CZcams Photo, Video & SFX Tutorials :
/ @mikehermesphotography
MY WEBSITE
mhtutorials.com/
FACEBOOK
My Facebook ( invite only ) Hang Out Group
Here's the link : / 29435. .
MY GEAR
The kit I use with Amazon links to check them out
( Support me by buying stuff on Amazon at no extra costs to you )
3D Control : SpaceMouse Enterprise Kit
astore.amazon.c...
3D Mouse : SpaceMouse Enterprise Kit ( AutoCAD mouse )
astore.amazon.c...
Camera : Canon EOS M10
amzn.to/297DsG4
Camera : GoPro Hero 4 Black
( haven't used it yet. It for visiting fairs and stuff )
amzn.to/29t7JnW
Small Gorilla Tripod for desk :
amzn.to/299pCmC
Normal Tripod for outside :
amzn.to/299pio4
Wacom tablet
amzn.to/1WNvZTa
Keyboard :
amzn.to/25NheoA
Mouse :
Sharkoon FireGlider Laser 3D Mouse
amzn.to/1U8sXFC
Microphone :
amzn.to/1swR3Rp
Microphone Pop filter :
amzn.to/1UhwfI4
2 x Monitor 27 Inch :
amzn.to/1XGKLfr
System Specs
NVIDIA GTX 1080 8GB Video card
amzn.to/2lne4CM
4 x 16GB RAM 3000Mhz ( 64GB Total )
amzn.to/2kRSsRU
Cooler Master Strom Trooper casing
amzn.to/2lnrSNO
Corsair ML-120 Red Pro Case Fans
amzn.to/2kSep3w
MSI X99A SLI Krait Motherboard
amzn.to/2lnej0v
Intel i7 Hasswell Core 6850k CPU
amzn.to/2lpZg7b
Corsair Hydro series H80i V2 Water cooled
amzn.to/2lnt9EA
DONATIONS / SUPPORT :
Donations allow me to keep making videos so they are highly appreciated.
Donate to my Paypal : hermesmike@hotmail.com
Buy me a Coffee : ko-fi.com/A418AXA
Become a Patron ( and get free stuff ) : www.patreon.co...
Buy me a cup of coffee ?
ko-fi.com/A418AXA
This video was required viewing for my gaming graphic design course. Thanks for putting in the work to make this video!
This video should be required for anyone who is learning 3D Texturing. Thank you Mike!!
Very welcome
it would mean the world for me if you do another video like this explaining 3d animation basics and that weird T Posture for characters and whole picture of 3d animation, thanks in advance, I love your videos a lot by the way.
I will see what I can do :-)
would be great to see eveything u say, examples etc. it is very important topic
awesome tutorial man
helped me a lot :)
You are very welcome
Just what I was looking for!
Thanks again! :)
You are very welcome
Thank you very much. Now I understand it more clearly.
You are very welcome
GREAT VIDEO MIKE LIKE ALWAYS :)
Thank you my friend !!
Thank you!
You are very welcome
Hello! You are the best and you my teacher.
Thank you
Cool video Mike. Thanks for doing your best :)
Thanks Steve, I tried to explain to the best of my knowledge
Mike Hermes I am trying to create a light post in maya and then import it into unity. What texture maps would you recommend for a light post?
It all depends on where you are going to use it
Mike Hermes It's going to be used for games
I typicall don't work with Unity but I think this will help docs.unity3d.com/Manual/HOWTO-importObject.html
thx Mike for ur videos . wanted to ask if u could kindly extend a bit this topic and show how we actually apply those maps ,at least some ,especially for characters models and whats the best way to create them as well . also maybe some important settings and so on . thanks again . really helpful
Nikolai, I don't do characters but I have done videos on how to apply Normal maps, Bump maps, Displacement maps, Specular Maps, Height maps, AO maps etc. Have you watched my videos ?
Ok questions time.
Please Mike if you can kindly answer these
1. Lets say if I use Arnold standard shader and I place color map under color, Where do I place normal map? Under bump?
2. What is a difference between Specular and Reflection tabs inside the arnold shader in Maya.
3. What are the maps we can place within Refraction Tab inside the arnold shader in Maya.
1. Yes, and change Bump to Tangent Normal 2. Specular is like a round spot of light on a shiny surface and reflection is overall reflection like on metal 3. I have never use that but refraction is penetration of light through the material and light breaking as a result ( Refraction Index ) Reason being that I typically do not use Arnold but mental Ray, VRay of Renderman
You didn't talk about 3d textures. It was about 2d textures.
I will give you the benefit of the doubt and assume you are not trolling me. ALL textures are 2D...... Textures used on 3D models are also 2D
HATS OF TOO THESE GREAT MAN ..HI SIR I'M RONY AN VFX CG STUDENT FROM INDIA KOLKATA
Brilliant, I kinda understand a bit more, Cheers! 👍.... Any chance of a pdf with a DL with this information?😊
Sir Big THANK YOU!!! i learned a lot from your video..Thank you so much!!. Big help for me. I'm a beginner in 3D animation...
You are very welcome Mark !
Nice video mike, I would love a UV tutorial on some more complicated objects than your other uv tutorials, like a gun etc. It would really help a lot.
I understand but that is usually very time consuming and that is why I typically avoid it
Yes, but it is also very difficult to be able to do without the knowledge, seeing how important UV'ing is.
I did some videos on UVing more complex objects. Did they help ?
Yes definitely, I've spent hours watching tutorials on it (yours were the most helpful :) ) however it seems to vary quite a bit depending on the object. For example I have multiple projects just sitting on my hard drive because I can't bring myself to UV it. If there was a more general tutorial on seams, sewing on more complex projects im sure i would be able to get it. Regardless great video as always and thanks for the fast response.
Damn Win sounds.
hi from iraq :) nice tutorial mike
what deffrents between glossines speculer and metalic roughness workflow
sorry for my bad english
Metallic roughness typically relates to the entire surface while specularity can be part of a surface
Hie Mike can you make a detailed tutorial of interior lighting with vray in maya
I can't do any requests right now as the list is simply too long at the moment, sorry
owk man. But maybe in future time if you have time i will still appreciate it. Thanks
you just listed maps but did not really explain them
Hey Mike, when it comes to PBR, do you prefer Metalness/Roughness or Specular/Gloss?
Not really, some game engines don´t even give you a choice.
EDIT: Other person deleted their comment.
I use PBR Metal unless the model contains glass, plastic etc
Hello from Ukraine))
Hi
Mike sir will you please make a tutorial of how to texture a Computer Keyboard in keyshot????
I have put a hold on requests for a little while as there are simply too many, sorry
Mike Hermes It's ok but later on will you make it???
I will add it to the list but it might take months ( I have over 200 requests )
i think title is misleading. i thought you will talk about actual 3d textures in maya.
Did I say Maya anywhere in the title or description ? And yes, I am talking about actual 3D textures
ARE YOU SURE YOU WATCHED THE VIDEO -_-
u waste ur time and our time to replay 2 u
just use google and type "3d textures in maya." simple as that
thanks mike for the tut :)
sir you are awesome i am actually pursuing 3d modelling and you helped me a lot can you plz upload some videos regarding texture it will help me a lot #love you videos
I just did
Title is misleading. I though you're talking about 3D textures.
There are some windows sounds occuring in the video, otherwise, great job!
Yep, sorry about that
actually i want to know difference in what cases Texture Map work together like plug in layer on top on the another layer in work process in Photoshop because i was looking a Tutorial in who AO map, Cavity map was just plug on top on the Color Map layer with special layer mode and then all layers was given Flaten Layers command and then save like TGA file and plug in Maya in Color channel.
This is just one cases.
But my question is : there is a way Cavity for example or AO Map to work to be plug in one difference channel in Maya or Marmoset or Unity and if it have such channel what is his name in the difference programs?
Because i was watch your tutorial for Marmoset : czcams.com/video/rExUxlklCY4/video.html
in there you plug AO to difference channel. Not like first examples for i talking about when lector just plug on top on the Color texture another Layer with Caviti map and Ao map and then flatten i one layer like one Color Texture and plug in Color Channel i Maya.
And what's the better way to use them --- plug into separate channels or as add-ons to the color texture or both?
explained quite complicated, very stretched but nevertheless I hope you understand my question correctly.
When working on a still render image you can overlay the AO, When working on a game prop, obviously not
Hey man, 10x for reply
"obviously not"
___
But why obviously not. I can't not understand.
:)