E46 Secondary Air monitor cleared
Vložit
- čas přidán 16. 07. 2024
- Finally clearing the secondary air system, now it’s ready for the smog test.
If your having issues with secondary air monitor not clearing this is your fix.
Please drop a like, comment and subscribe.✌️
!!Link to the USB cable!! Below
www.amazon.com/Taotao-FT232RQ...
!! Link to the software !!
czcams.com/users/redirect?even...
!! Link to the Install video !!
czcams.com/users/redirect?even... - Auta a dopravní prostředky
Thank you for this video. I had the exact same symptoms with my E46. There were no vacuum leaks, hoses were good, the secondary air pump appeared fine, and the secondary air monitor wouldn't set. My car has over 200K miles without changing the O2 sensors. I replaced the pre-cat O2 sensors and started up the car and let it idle for a few minutes. I turned the car off and rescanned the car. The secondary air monitor was set. Thank you.
Your welcome, I always try and share what I find out, especially thing like this where you can read up on it but nothing like seeing it live, please subscribe
Thank you, I just ordered the tool and Bosch sensors for my 2005 325i as the registration with CA smog is due very soon. You made me a little nervous with the oil cap removed during the process.
If this is the problem you are facing it should work. Yeah not a good idea to have the cap off 😂
Thank you for making this video! I need to try this because I have the exact same issue with my 330.
It should work, good luck
Thank you so much for sharing! This was great
You are so welcome! Please like and subscribe
@@acef_performance8416 liked and subscribed!😊
Thank you! Finally passed!
Happy to here this worked for you
Please subscribe to the channel
Have you checked uh a little air pressure that is behind the intake manifold that controls how much air goes in and out?
Yes, there is a check valve and a electric on/off valve they are both good, the O2 sensors where definitely the problem, the data on the scanner shows the difference.
@@acef_performance8416 not to long ago I had p1093 which is a large vacuum leak and I had 172 174 I used torque app to look at my fuel trim this app help me out bought a smoke machine can't go wrong iam glad you figured out you're problem am going on 238.753 miles on my Guage
I know I had no vacuum leaks I replaced all the gaskets and I check my fuel trims, I did have leaking brake booster but I also fixed it
Hey so my car has catalytic fuel trim issue, you think if I change the o2 will make a difference I change them like 2years ago Bosch one as well
What issue are you having exactly, hit me on my IG @lui328i
My exact problem. I'm contemplating about replacing them. Should I? I'm having the same exact problem!
I this is definitely your problem, trust me
Is the smog vacuum line only for California cars? My check valve doesn't have a vacuum port or a vacuum line coming out of it.
Not sure on that, I thought they all had it, but yeah this is Cali
older bmws have the vacuum port, newer ones don’t have a vacuum line going to the back of the manifold
This did not work on my car
What is the problem you are having
I cannot get my check engine light to turn off and I’ve replaced everything. Kombi valve, solenoid under dash, check valve behind the intake, checked for leaks, Even the 02 sensors before the cat you’re talking about. I’m having a P2770 code though being the secondary air Hot film air mass flow sensor which I’ve also changed 🤯 Please help
If you are trying to clear the light with a basic OBD2 scanner it will not clear, you need to use the laptop and software. Some e46s have a “check engine light” and some have a “service engine soon” not sure why bmw did this but I learned the the one with service engine have a combo thing where scanner will clear basic codes but for more in depth you need to use the software, it took me a while figure it out
Needed this !🫱🏾🫲🏽
Glad I could help