Cool 1/24th scale buggy. All the parts look top quality. You did a good job wiring up the lights. It looks like it would be hard to build something so small. Great work !!!
Yeah, they fit so well on that bumper! I have the new big 64mm Hyrax’s on it now… I show it in my latest Wheel tire video I posted today. It looks great with the bigger tires and really needed them with the length. Thanks for watching!
This rig deserves a lizard ultimate! Would love to see the ultimate packaging outcome this chassis that is so compromised when it comes to electronic real estate.
I think the way I mounted all the electronics under the tray worked pretty perfectly. Looking at the new Ultimates with the case, they would actually be a bit bigger than the pro. Of course no external BEC required, so that saves space. Think I am going to try out one of my Ultimates in my Cheat Code build.
Thanks! Yeah I’m looking around for some red alternates I like for this. I really liked the red Treal type B with carbon fiber rings o used on my Mad Max 2.0! May do something similar…
I spent over $1000 building the same buggy and it’s my most capable 1/24 scale vehicle and it’s a tank. It weighs a lot for its size and I put a fat battery in the front so it just wants to squat and dig on everything
Thanks for the tips about the spacers on the double barrel shocks - Installed mine last night and realized they were kinda noisy and sticking a little.
Awesome, glad it was helpful. Have a similar install tweaking lesson in the Deadbolt build as well where I used tele shocks. They are awesome when setup correctly!
You can shorten the drive shafts, just make sure you trim the inner shaft so it doesn't bottom out. Also install them with the outer shaft towards the diffs.
Looks amazing and funny enough it is pretty much exactly what I'm building I have a c10 currently that I have upgraded to the max, barrage motor, all the red aluminum links, weights, Treal bead locks and 64mm little guy tires+++ and now Ive decided to go a different way so I ordered all the furitek brushless kit and I just received my injora buggy chassis and my radio link RC6GS, lizard pro, led light bar and more so the only difference is I haven't extended the front end and I am adding rear steer other than that our buggies will even look the same because I used the red aluminum links and so on. So as for the lights in the bumper I was thinking use a long piece of black heat shrink over the wires and they will disappear. Anyway awesome to see what my buggy will look like when I'm done (for the most part anyway). Thanks
Sound like it will be an awesome build! Rear steer on this would really help with the length. Good luck shrink tubing those wires..they are a bit large and that bundle at the end is pretty thick. I usually like to black out my wiring as well with shrink tube for looks. Good luck on the project!!
@@bcochener great idea with the shrink tube. Most everything is here except rear steer axle and servo ug they sent an email it'll be a week oh well. I've spent the past 5 hours building it those dang metal links always give me such a problem and of course none of the parts come with instructions but I've got all links, motor, weights, axles and servo all steering to screw to the buggy chassis the only part that gave me a problem is the weight kit I got that came with diff covers, knuckles, extenders and wheel weights don't play well with each other I can't use the weights with the extenders so why sell them as a package SMH any way your video has been a life saver, somewhat of a how to video for me so thank you and I wish I could send you build pictures some l how. Mine looks alot like yours and I'm telling you i ordered everything before I seen your video I even used black and gold diff covers and weights Andy way great minds and all. Thank you!!
@@bcochener I finally finished. The rear steer is great but sometimes makes it a bit difficult on narrow bridges because I haven't figured out how to set trim on aux channel but I have premix on and it's awesome. So I went 3s and the furitek 15t pinion and it does burnouts it's fast and still has the torque to climb walls. I had a hard time with lighting but I went with the metal jeep bumper that is the large triangle shape push bar it's great and some red tail lights in a custom bumper. I tried to make it look a bit different than mad max but honestly it looks alot like it, I accidentally even added the same Treal sticker to the top not realizing you had but I did injora side stickers. Anyway these things are beast and have blown away every truck in have went up against. Next I'm doing a drag truck with the furitek Godzilla and rocketman.
I have the mofo Mt chasis I'm trying to build now, I have links, tires, a surpass hobby motor combo high 9500 kv figure it will work ok for better speeds. Need to get Trans gears and servo mount and servo. Trying to get mofos
I’ve used different types. I usually just stack the plastic washer/spacers from Mofo RC. Allows for adjustment. Otherwise I have used Hot Racings aluminum spacer pack. Has 1mm up to 5mm, 4 of each. Any washer or even a plastic servo horn cut down. Mofos: www.moforc.com/products/8x-plastic-spacers-1-4mm-thick-1-4mm-hole-4mm-wide-diameter-used-for-body-spacers-mounts-shock-mounts-or-anything-you-can-imagine?_pos=1&_psq=spacers&_ss=e&_v=1.0 Hot Racings: M2 spacers look to be sold out.
@@bcochener I have the same set up and same shocks so I used a single elastic strap on the center front only, this allows full articulation but still limits those double barrels from extending while going uphill and creating a top heavy roll over situation.
What are your settings for the FOC, I have the lizard pro with blue tooth running my Komodo motor, but struggling trying to understand how to adjust the FOC, any help?
I have the FOC set to its max (I think 30). -Field Oriented Control is the continuous torque to keep the vehicle moving constant over obstacles without the need to throttle up. Start up power(Low), MaxForw(100), MaxRev(100),MBrake(100),DragBrake(80),Punch(1), Nuetral Brake(1). You can play with throttle curve points as well. Example: 21/12, 38/55. 77/70, 100/100
So you did rear deadbolt on front and C10 rears on the back what was the total wheelbase you ended with??? Thanks trying to fit a tetra X2 bronco under it with 150 mm wheelbase. Thanks
It’s the only place I could fit it. Your correct typically in all your thinking. I have added front brass to help compensate. And the motor is fairly big and high on this too, which has to be compensated for.
@@bcochener Yes brass weighted wheels in the front helps a lot. I have a simiar setup but I went long using high links (short front, long on the rear) motor front(cheaper version surpass outrunner with hobbywing esc), lowering the shock position helps as well - give it lcg affect. Nice looking rig!
What do you think of those shocks maybe on a JLU? And man,,,,,, you are killing it!!! I'm the one that looked at your JLU 0. 0 and asked you. I'm building it now.
I think they would be fine. They do come with S/M/H springs as well to tune them further. They are long (43mm), but not as long as the HR telescoping shocks (48mm).
Sorry, another question about JLU 0.0. Was your rear steer diff a RZXYL by chance? I'm building mine now, and I'd like to use your rear steer diff front and rear? Love your new vid too! Please keep this content coming!
@@workaholic9286 Not sure what you mean. On the 0.0 build, the rear axle assembly I used was this: www.ebay.com/itm/174747452308?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 However, brass diff covers will not fit it, you have to stick with the aluminum one it comes with. I just used that axle in the rear, but you could use it in front.
@@raenieldelacruz4925 Take a look at this video. Not sure if you have extended axles, but they always cause that binding issue. czcams.com/video/bW7VK_4TOxw/video.html
Know what they call 3 cases of spare parts? Answer: A good start. LOL Looks like a fun build. I gotta stop watching these videos. I only have so much room in my house.
Haha! I hear you about space!! The little 1/24s do help with that. At some point, I bet I’ll be opening random drawers and find one. They just multiply around here.
@@bcochener Don't get them wet...and whatever you do...don't feed them after midnite. No matter how much they beg and plead. Wait...that might be how I got so many Gremlins running around my basement. But same applies to Drones. LOL
Cool 1/24th scale buggy. All the parts look top quality. You did a good job wiring up the lights. It looks like it would be hard to build something so small. Great work !!!
Great build I’ve just ordered the frame those lights look awesome
Yeah, they fit so well on that bumper! I have the new big 64mm Hyrax’s on it now… I show it in my latest Wheel tire video I posted today. It looks great with the bigger tires and really needed them with the length. Thanks for watching!
Great video and super clean build. I just ordered the same chassis and have a crazy amount of extra parts too. Thanks for more ideas.
That is one SWEET looking SCX24 build. WOW! I mean WOW!! well done!
Thanks! Yeah... the name just fit so well. Once I put the flipped bumper on, it looked quite apocalyptic!
This rig deserves a lizard ultimate! Would love to see the ultimate packaging outcome this chassis that is so compromised when it comes to electronic real estate.
I think the way I mounted all the electronics under the tray worked pretty perfectly. Looking at the new Ultimates with the case, they would actually be a bit bigger than the pro. Of course no external BEC required, so that saves space. Think I am going to try out one of my Ultimates in my Cheat Code build.
Looks amazing dude, cherry on top would be nice metallic red wheels to match the rest of the flashes of red. Gorgeous set up.
Thanks! Yeah I’m looking around for some red alternates I like for this. I really liked the red Treal type B with carbon fiber rings o used on my Mad Max 2.0! May do something similar…
I spent over $1000 building the same buggy and it’s my most capable 1/24 scale vehicle and it’s a tank. It weighs a lot for its size and I put a fat battery in the front so it just wants to squat and dig on everything
Sounds awesome!
Thanks for the tips about the spacers on the double barrel shocks - Installed mine last night and realized they were kinda noisy and sticking a little.
Awesome, glad it was helpful. Have a similar install tweaking lesson in the Deadbolt build as well where I used tele shocks. They are awesome when setup correctly!
Fantastic build mate, the rig looks amazing
Thank you! Cheers!
wow
Gonna be a Beast Hope to see small run footage👍
Have a small one posted: czcams.com/video/50NQgTyUJ2c/video.html
You can shorten the drive shafts, just make sure you trim the inner shaft so it doesn't bottom out. Also install them with the outer shaft towards the diffs.
I would put an in-runner on it and move the battery forward. Nice build though.
Very cool and beautyful bouncer, love this project!) Excellent work my friend!)🤩💥💯👍👏
Just WOW!!!!
Very nice build!!!
Looks amazing and funny enough it is pretty much exactly what I'm building I have a c10 currently that I have upgraded to the max, barrage motor, all the red aluminum links, weights, Treal bead locks and 64mm little guy tires+++ and now Ive decided to go a different way so I ordered all the furitek brushless kit and I just received my injora buggy chassis and my radio link RC6GS, lizard pro, led light bar and more so the only difference is I haven't extended the front end and I am adding rear steer other than that our buggies will even look the same because I used the red aluminum links and so on. So as for the lights in the bumper I was thinking use a long piece of black heat shrink over the wires and they will disappear. Anyway awesome to see what my buggy will look like when I'm done (for the most part anyway). Thanks
Sound like it will be an awesome build! Rear steer on this would really help with the length. Good luck shrink tubing those wires..they are a bit large and that bundle at the end is pretty thick. I usually like to black out my wiring as well with shrink tube for looks. Good luck on the project!!
@@bcochener great idea with the shrink tube. Most everything is here except rear steer axle and servo ug they sent an email it'll be a week oh well. I've spent the past 5 hours building it those dang metal links always give me such a problem and of course none of the parts come with instructions but I've got all links, motor, weights, axles and servo all steering to screw to the buggy chassis the only part that gave me a problem is the weight kit I got that came with diff covers, knuckles, extenders and wheel weights don't play well with each other I can't use the weights with the extenders so why sell them as a package SMH any way your video has been a life saver, somewhat of a how to video for me so thank you and I wish I could send you build pictures some l how. Mine looks alot like yours and I'm telling you i ordered everything before I seen your video I even used black and gold diff covers and weights Andy way great minds and all. Thank you!!
@@bcochener I finally finished. The rear steer is great but sometimes makes it a bit difficult on narrow bridges because I haven't figured out how to set trim on aux channel but I have premix on and it's awesome. So I went 3s and the furitek 15t pinion and it does burnouts it's fast and still has the torque to climb walls. I had a hard time with lighting but I went with the metal jeep bumper that is the large triangle shape push bar it's great and some red tail lights in a custom bumper. I tried to make it look a bit different than mad max but honestly it looks alot like it, I accidentally even added the same Treal sticker to the top not realizing you had but I did injora side stickers. Anyway these things are beast and have blown away every truck in have went up against. Next I'm doing a drag truck with the furitek Godzilla and rocketman.
@@timwegman5776 man, that sounds like a bad A rig right there! So happy I could help in any way!
Aww man! Thanks! I was having the same issue!!! Going to go back and remove the O rings. Great video!
Glad this helped!
Very cool build👍👍
Sweet build!
Just saw this! Great live crawl session today!
@@bcochener oh yeah now I definitely remember your channel!!! That thing is bad bro! I just subbed to you also!
I Really like Treal anyway. But those HC Arms are my next upgrade Thanks for this video
I agree, all the Treal parts I have had (SCX24 or not) have been top notch fit and finish wise. Never had an issue with there parts.
Man, all of your builds are top notch! Keep 'em coming!
Thanks, will do!
over drive gear in front axel will help with turning
Oh yeah, got some in in the following build update: czcams.com/video/9Cs90cnzpiY/video.html Thanks for tuning in!
Man I just picked up a chasis like this from banggood and have no clue how to build it lol I'm sure I'm capable just never done from parts before 🤣
Well, this video should definitely help you out then! Good luck with it.
I have the mofo Mt chasis I'm trying to build now, I have links, tires, a surpass hobby motor combo high 9500 kv figure it will work ok for better speeds. Need to get Trans gears and servo mount and servo. Trying to get mofos
Sick
Love the build, what size spacers do you use for the shocks?
I’ve used different types. I usually just stack the plastic washer/spacers from Mofo RC. Allows for adjustment. Otherwise I have used Hot Racings aluminum spacer pack. Has 1mm up to 5mm, 4 of each. Any washer or even a plastic servo horn cut down. Mofos: www.moforc.com/products/8x-plastic-spacers-1-4mm-thick-1-4mm-hole-4mm-wide-diameter-used-for-body-spacers-mounts-shock-mounts-or-anything-you-can-imagine?_pos=1&_psq=spacers&_ss=e&_v=1.0
Hot Racings: M2 spacers look to be sold out.
Man that's cool , is it water proof ? It's to nice to use outside .
Doubtful, since it has the open 'outrunner' style motor. I don't play in serious water with these little guys anyways.
Treal quality is shining bright. Awesome build mate. I am curious how much the final cost of this project is ?
Thank you. Not sure, not cheap. You’ll have to add it up from the parts.
Super clean looking build , although it looks a bit top heavy.. not that it really matters anyway.
Thanks! It is a bit. the boulder bars helped and I think getting the front shocks limited will also help it. Maybe a stage 2 coming on this one...
@@bcochener I have the same set up and same shocks so I used a single elastic strap on the center front only, this allows full articulation but still limits those double barrels from extending while going uphill and creating a top heavy roll over situation.
What are your settings for the FOC, I have the lizard pro with blue tooth running my Komodo motor, but struggling trying to understand how to adjust the FOC, any help?
I have the FOC set to its max (I think 30). -Field Oriented Control is the continuous torque to keep the vehicle moving constant over obstacles without the need to throttle up.
Start up power(Low), MaxForw(100), MaxRev(100),MBrake(100),DragBrake(80),Punch(1), Nuetral Brake(1). You can play with throttle curve points as well. Example: 21/12, 38/55. 77/70, 100/100
So you did rear deadbolt on front and C10 rears on the back what was the total wheelbase you ended with??? Thanks trying to fit a tetra X2 bronco under it with 150 mm wheelbase. Thanks
Correct. It measured out to about 152-153mm.
It will depend on the lift of the shocks as to how long it ends up. Lower=longer, higher=shorter.
Being battery on the rear - does that have any affect climbing steep incline? Does it flip backwards being too heavy rear?
It’s the only place I could fit it. Your correct typically in all your thinking. I have added front brass to help compensate. And the motor is fairly big and high on this too, which has to be compensated for.
@@bcochener Yes brass weighted wheels in the front helps a lot. I have a simiar setup but I went long using high links (short front, long on the rear) motor front(cheaper version surpass outrunner with hobbywing esc), lowering the shock position helps as well - give it lcg affect. Nice looking rig!
So... what if you ran the body in reverse? Keep some of that weight up front?
I would use different links rather than flip the chassis backwards.
What is the point of using the bec?
It provides more voltage to your servo (than the ESC) without over powering your ESC.
What do you think of those shocks maybe on a JLU? And man,,,,,, you are killing it!!! I'm the one that looked at your JLU 0. 0 and asked you. I'm building it now.
I think they would be fine. They do come with S/M/H springs as well to tune them further. They are long (43mm), but not as long as the HR telescoping shocks (48mm).
You used the Tru rc shocks on the JLU 0.0?
@@workaholic9286 Correct. Same as the Yeah racing ones, just less $$
Sorry, another question about JLU 0.0. Was your rear steer diff a RZXYL by chance? I'm building mine now, and I'd like to use your rear steer diff front and rear? Love your new vid too! Please keep this content coming!
@@workaholic9286 Not sure what you mean. On the 0.0 build, the rear axle assembly I used was this: www.ebay.com/itm/174747452308?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
However, brass diff covers will not fit it, you have to stick with the aluminum one it comes with. I just used that axle in the rear, but you could use it in front.
Will the Furitek rocketman fit with the 2030 sized motor?
Yes, but with some modding of the battery tray I believe. I saw one on Reddit with the Surpass 2030 when I built this one.
You don't have to answer me on that one but I do have questions I'm trying to build one
Awesome. It’s a fun little build. Hopefully the video helps out.
Where did you get the motor
Furitek
what are all the parts u used and there brand? what axles are u using
0:13
@@bcochener what are all the parts u used
Is it for sale..or would you bilt me one...
Haha, no and no.
what is the name of the chassis? or where can i buy it?
www.amazon.com/INJORA-Chassis-Crawler-Climbing-Upgrade/dp/B094Y2DSW8
how much money did this cost you
hi sir can you do a tutorial for the front axle that causes binding?
driveshaft or axle? Can you explain the issue more?
@@bcochener in the axles i have binding when maxing out the steering
@@raenieldelacruz4925 Take a look at this video. Not sure if you have extended axles, but they always cause that binding issue.
czcams.com/video/bW7VK_4TOxw/video.html
Yup got one but had it removed right away since i had very small steering angle when it was installed.thanks!will check out that vid!
What was/is the total build cost, not including scx plz
No idea. I didn't even start with an SCX24 on this one.
Кто поможет собрать?
Jesus no wonder there’s never anything in stock for the scx24s.. Everything is in your parts bins 😂
Total price?
Lots.. haha. I don’t keep track. I buy parts along until I get a build together.
How much?!
Too much!
Know what they call 3 cases of spare parts? Answer: A good start. LOL Looks like a fun build. I gotta stop watching these videos. I only have so much room in my house.
Haha! I hear you about space!! The little 1/24s do help with that. At some point, I bet I’ll be opening random drawers and find one. They just multiply around here.
@@bcochener Don't get them wet...and whatever you do...don't feed them after midnite. No matter how much they beg and plead. Wait...that might be how I got so many Gremlins running around my basement. But same applies to Drones. LOL