SCX24 MEUS ALUMINUM RIPPER BUILD: FURITEK, MOFO, MAZZ, TREAL, LGRP, DJ CRAWLER, J CONCEPTS & MORE
Vložit
- čas přidán 25. 07. 2024
- (Correction: I mispoke @1:11:24 - should have said 530, 600 & 550.)
Building up a very limited aluminum Ripper(s?) for the SCX24 platform. What color? You just have to watch... Enjoy!
(Don't forget, you can watch at faster speeds in "Settings" to save time!!)
0:00 - INTRO/UNBOXING
4:06 - CHASSIS OVERVIEW
6:22 - AXLES, SERVO, LIGHT KIT
7:14 - MEUS AXLE ASSEBLY OVERVIEW
9:13 - REAR AXLE QUIRKS & SLOP
11:55 - FINAL REAR AXLE ASSEMBLY NOTES
13:28 - FRONT AXLE ASSEMBLY NOTES
14:42 - SERVO TRAY COMPARISON
16:33 - SERVO INSTALLED/SPECS
17:10 - AXLES/CHASSIS WEIGH-IN
19:30 - CHASSIS TEAR DOWN
20:05 - ELECTRONICS/MOTOR OVERVIEW
22:51 - MOTOR/TRANS INSTALL
16:02 - SUSPENSION OVERVIEW/OPTIONS
27:17 - SLIDER OVERVIEW
30:58 - ESC SWAP/DRIVESHAFTS
33:19 - ELECTRONICS INSTALL
35:28 - LIGHT BAR MOD & INSTALL
38:43 - MOTOR/STEERING/LIGHTING TEST
41:15 - WHEELS & TIRES
51:27 - FRONT AXLE SLOP/WOBBLE
53:37 - SURPRISE, SURPRISE...
54:35 - 2ND RIPPER BUILD
55:23 - MOTOR INSTALL/NOTES & TEST
58:12 - ELECTRONICS INSTALL/ASSEMBLY
59:29 - 2ND RIPPER FINAL OVERVIEW
1:01:50 - WHEELS & TIRES TAKE 2!
1:10:35 - FINAL WEIGH-IN
1:11:16 - COMPARISON
1:12:46 - TABLETOP TEST - ORANGE
1:16:33 - TABELTOP TEST - PINK
1:19:42 - FINAL THOUGHTS
1:24:43 - GALLERY - Auta a dopravní prostředky
There are under 210 total scx24 aluminum rippers (numbers 1-207 + prototype and a few oddballs) and under 110 TRX4M (numbers 1-100 + prototype and a few oddballs)
Also, if you thought it was pricey when you bought it from Meus, you should see the going prices now.
Oh… and awesome video. Good job, good sir!
Ok that makes sense then on the Pink being such a high number. I guess the pink and the blue limited a were the last few to go out the door. Thanks for the clarification!
@@TheShopMiniRC oh lord, I have. Nothing to what is in these both being built now. … they may get sold before I run them. I don’t know if I’d feel comfortable scratching up such a pricey & limited release. …decisions…. 😂
@@TheShopMiniRC thank you much! Which color & wheel combo is your favorite of the 6?
Man I love yr vids! How you build and edit your vids with such attention to detail is exactly how I like to do my builds! I'm learning so much form you and getting a ton better at building just overall and in general. Thanks man.
Thank you! I appreciate that brother!
Thanks for the detailed video! I have that MEUS front axle and I found it had overdrive compared to stock SCX24 axles (my rear is a stock style aluminum assembly with +5mm hexes)
That's correct. FR and RR come with 2/14T gears in the MEUS and they even give you a 2/16 for the rear axle (giving you the 14% OD then) for their setup. Too bad the front worm gears are not interchangeable with the standard ones though. -Great idea on the rear axle. I could have done that to get rid of having that tall rear link riser on this build.
-Cheers!
My favorite wheel/tire combos gotta be white for the pink ripper and the orange for the orange ripper, looks absolutely killer
Both great choices! I’m torn on the Black Shift RC etched wheels being my favorite on the white. I cannot decide at all on the orange. They all look fantastic really.
On my first set I put an o-ring on the front end on the axle shaft itself and then slid it through the back of the knuckle into the bearing and then through and that took out a lot of that tire shop and I contacted them about it and several other people did also but once I found that it's like they started putting behind the heck😊
All right commented on this once but I forgot what I end up doing was running like a 3 or 4 mm hex and that takes care of a lot of it
Heck yeah. I always have those 4mm and 5mm hexes on hand too. It’s amazing how much difference a mm can make sometimes with wheel fitment. Great little fine tuning device.
Awsome builds, still waiting for parts to finnish my (Plastic) Ripper build 🙃
It's cool 👍 I enjoyed watching the video
I want you to know…I just spent $44 but I got 6 sets of those HobbySoul tires🤣 told ya I needed em!🤘🏻
Hell yeah! I got some more on hand to try on another build as well. I think you’ll like them.
@@bcochener I’m hoping so!
More and more I see these I really kick myself in the ass I missed out I love that orange and silver one
Well, you see I accidentally bought a pink and orange… 😆
That is sweet looking Brian
Appreciate ya Sammy!
Thanks for doing this build video!! It's giving me inspiration to crack open # 167.
Nice! Is that another Pink/white??
Yes! Little Guy white wheels look killer. Injora swamp claws are my go to tires. 👍
@@Logger_Crawler Oh sweet! You’re going to enjoy the build for sure!
Both beautiful rigs
Thank you Andy!
I ran LG RP 33 percent underdrive in the rear on the axles
How’d you like it? Haven’t run that ratio yet. I assume similar to 33 O.D.
Also I broke one of their 2 mm screws off flush in the knuckle from the steering link just cranking on the shift RC Servo just slapping them back and forth to show how fast Servo was I actually got it on a video when it happened
Really beautiful builds! So are you and the other folks that got these special edition kits on a Meus mailing list/club membership?
Be nice if the headlights matched the white color light of the light bar. I wonder if the headlight wires could be spliced into the light bar wires for on/off controls?
And +1 on the white wheels. Lets the pink tube frame stand out on it's own, as it should. :) Silver on the orange as well.
Appreciate that! No mailing list, just had to be quick about purchasing them. They didn’t last long…. Especially the pink/white limited one. Already have a switch for the pink one like I did on the orange. Don’t think you could tap the light bar because of all the multiple functions it has. That might just turn the headlights on and off each time you cycled the light bar mode. Love those panel matched wheels on both as well. I agree, they pop the cage nicely. Cheers!
First person I heard about the long travel oil shocks was from you the hot racing I don't like them near as much either that or I'm running the wrong weight of fluid in them as the 36 Big 4 hot racing are really good I like them a lot more
Also I found out if you use a different hex on the front end you won't have that tire wobble I think I used a three or a 4 mm extra and didn't make it too wide either where you got a bunch of scrub
Have you heard about big kid tiny truck ESC very very small footprint so much smaller than the other ones you know and really good and you can tune it through a Wi-Fi Linker
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Thank you, thank you!
When I have come to find is they put that overing back there to keep the slop out of the Grimm cuz when we first started getting them they had a lot of slop in the tire
Yeah. Floppy and sloppy for sure.
I don't know of anybody else has noticed it but I'm mainly every transmission you get besides a couple that spur gear the bearings that are in the back inside the transmission that holds that shaft has like a millimeter or two of wobble right I replace all of my bearings with high-speed bearings and I try to get rubber steel bearing and not steel steel because that's where a lot of that noise comes from on metal gears because the spur gear is wobbling up and down and affecting your gear mesh even on mofo transmission I replaced his bearings because that wobble in that spur gear
Sweet builds, I like the orange ripper, what leds you use for the main lights?
Appreciate that! The LEDs are from the MEUS Ripper light kit on Amazon or their site.
That's the fastest Servo on the market I have no phone service and brass and aluminum I have the Black Label I have every Servo you can Bank of I have reefs NSD RC and still the shift is quicker than any of them but it is not as strong as some of them
Great video I’ve noticed you haven’t done no trx4m’s is there a reason? is it upcoming? The platform is not suitable.?
Thank you! No reason, just so much time and money you know. I may get into them at some point. Cheers!
Where can i find this on the aftermarket scene looking for one for the scx24 and trx4m
No idea brother. I got these when released. I’m sure there are some out there.
Currently unavailable.
We don't know when or if this item will be back in stock.
Yeah, these are all on the black market now… 😂
Would you consider parting with the Pink one?
Yes I would consider, let me think. Can I get back to you? Not planning on driving either in the interim, still want to do the light switch in the white and Exo CVDs on the Silver. You’ll be first in line on the pink… it won’t be cheap… 😂
@@bcochener Thanks! I pulled the trigger on Pink November 17th through Amazon, now shows unavailable. 🥲 I think I like the whole setup on the orange one better but you did nice work on both. Thanks for dibs on your pink one. 👍
Where did you get the scale hardware for the treal orange wheels?
Mazz Designs! Cheers!
@bcochener thank you sir. Cheers!
@bcochener sick builds by the way. Currently waiting on mine to come in.
@@fire4fighter951 appreciate ya! You’re gonna enjoy this build!
Let me know if you want to sell that orange one
I probably will sell them both. I’ll let you know. Both still just tabletop driven. Still want to add a light switch to the pink one too. I have toooooooooooo many. I need less, to drive them more.
I thought that I spent a lot of money
That's a straight copy of a mofo Servo mount
just purchased #187 for almost 1k lol blue and silver
Wow! Now I hope you save some money to build it!
I def do! Already have most of the parts if not all - do you know if these work with the Injora low center of gravity carbon fiber chassis frame
@@kingice2439 No, this is THE chassis. Cant put it on anything.
@@bcochenergotcha. Well I can’t wait for this build - do you have an Instagram for your builds by any chance