@@TheWesNile you probably know this but the reason for that was you can put any stock set in the front and instantly have 50 percent overdrive to the front axle
I'm one of those "doesnt really know what I'm doing", as I'm just getting into RC builds, so this was super informative! Awesome that you gave your honest opinion, pros & cons of each axle. Always looking forward to your IG and now YT content!
Doing the same 6x6 build as you. Just got the mazz axles in for it too. Can't wait see what body you do. Definitely my new favorite channel. Keep up the awesome work man!
Funny because the meus are what I chose for my first custom scx24 build, stay tuned for the build series on my channel once the axles and carbon chassis arrives :)
I actually bought these axles becuase i saw them on your insta when u showed the playmobil porsche body and i asked what axkes those were and u replied instantly, thank u again im so glad i went with them because im fairly new the the hoddy and they were pretty much stress free to install!
Sooo dry its impressive how you keep it up without breaking character. For the record I don't have to do my axle video now. Agree 100%.....s8 portals was the only newbie to me and yup I'm jealous because I thought I had them all....how much you want punk?🤬
You crack me up 😂😂and also really enjoy the content. Extremely helpful especially for someone not very advanced in the hobby yet. Thanks appreciate ya bro
ive been wanting the meus axles for a minute now for my c10, seen a guy at my LHS with them and the steering angle is insane as well as appearance. subbed
Also: exo rc has titanium s8 axles. No need for outer bearing in axle housing and allows for same if not more turning radius than isokinetics. My new fav as they give less play/slop
Honestly I love Super 8 but mofo X15 is a rock solid I've never broke a Super 8 housing I have broke axle shafts from Exo but I believe the X-15 are probably my favorite and then treal
X15s are basicly a trx4m axle with scx24 worm gears and link locations. You can use trx4m hubs and cvds in them. The v2 version now uses stock scx24 mounting hardware.
Yo dude, love your approach to your video's 😎👍I am quite new to this 24 scale crawler game. My first set of axles was the Meus isokinetic one's you feature at the end😎👍since seeing my new rig, my son has been really wanting a similar rig, now, before I managed to discover this awesome video you posted, I bought a set of OGRC axles for my son's rig, they boasted a 43° full lock angle on the steering (with CVD's to make this huge angle work), overdrive on the front axle etc etc..... when I received the axles, firstly the part on the front axle that mates to the centre shaft won't fit (it's much too big) then secondly it would seem that the actual joint on the CVD's won't actually fit in the given space between the C knuckle and the end of the axle, then thirdly the steering link is that tight that I'm not sure it would reach that massive steering angle without damaging the servo, so they are pretty much scrap in my eyes...... since my discovery on how poor these OGRC axles actually are, I ordered my boy a set of Meus racing isokinetic axles for his rig. These OGRC one's are really pathetic..... I'm wondering, have you had many OGRC parts? How would you rate them? Do you know of any way to fix these things? or am I pissing in the wind? I have asked OGRC for a refund, they don't seem to want to reply to what I've written, lol, it may be worth trying to warm other crawler enthusiasts about these terrible items so nobody else ends up with egg on their faces like I have🤷♂️
In my experience, a lot of the chinese style companies are hit or miss. It seems like 1 out of every 10 products has some type of issue. I havn't had any problems but plenty of other people have. Random stuff missing, bad quality control, etc... Customer service I'm also unsure of. I do have some ogrc axles and I don't have a problem with them
I built a 6x6 meus truck. Nightmare if you use bigger tires. I made a single cab axial power wagon with wood bed. Link mounting options could be better. Mounting plates for electronics could be better
I learned the hard way with these meus axles…. The hardware absolutely sucks. They snap off in the link threads. Luckily, they sent me a new front axle. I drilled the threads out and I have them held in with a nut instead of relying on the built-in axle thread. There is a noticeable difference in clearance between these and my little guy racing parts super eights.
The Meus iso axles are pretty dam sweet my faves as well ! The only drawback I have found and it is a big one unfortunately is the black axles servo mount holes are very tight from the paint or anodizing ? Many have mentioned stripping or breaking the soft screws that come with these. I even gently piloted the holes on the servo mounts but still managed to break one screw inside a servo mount hole. They need to cover these holes during the paint or anodizing process and maybe include some stainless screws : ) Now I want a set of the Nylon axles lol !
Grats on 1K! Question: planning a build with cheat code v2 and super 8s. Can I use a mix of c10 front and deadbolt rear injora links or do I need to get custom links for those axles?
Thanks! I'm not sure off the top of my head, I'd have to be sitting there messing with it. I would guess if they are the injora links that have threaded ends it might work because you could rotate them a bit as needed for adjustments. Again, I have no idea though
Appreciate the informative video! X15 axles: can use TRX4M weighted knuckles, maybe very minimal adjustment. Also, they should come with 4mm axle nuts to use the same T wrench for your other axles. Does anyone know if X15s will share diff covers with Super 8? Look similar.
RCAWD: *We know they suck, we're working on it*.... Well that's a brilliant and very modern business strategy. Happy to sell a bunch of crap units, see if anyone complains and if their enough backlash, THEN we'll design them to work. This is just gross. They just schit on people and don't give a phuck. Thanks for being honest!!! More people like yourself need to be making videos.
@@24Yepp fyi, the mazz nlyon are the same as the ogrc, mofo, meus and a few others. (all from the same factory) some come with dogbones and some with cvd.
I don't know of anybody knows this or not but that's mofo servo Mountain he's the one that come up with that Um and a lot of people have stoked that from him them are good axles the ISO they're really good I beat the hell out of them things I mean cranking big RPMs and have not broke them I did break up I did break a screw off in the steering link they sent me a knuckle I had to drill it out to get it working working but they did send me one to replace it it just got sent back because they didn't put the right address and that was just from cranking the servo back and forth the shift RC snapped It Off
thanks for the links🙄 1:23 especially when you speak so clearly. seriously, i have fucking clue what you said those were. 1:46 you never did say anything about them in the first place. 1:56 NO. wow really helpful. man this video is loaded with helpful info.
Just an fyi the 2nd batch of x15s that don’t have the stripes on them don’t take the bigger hardware like the v1 you have.
😧 I had no idea, awesome. Thank you for the info
Also 50% under drive in front and rear x15's now
@@TheWesNileSweet, thanks for the info. I've been slacking
@@TheWesNile you probably know this but the reason for that was you can put any stock set in the front and instantly have 50 percent overdrive to the front axle
What? I like the stripes
I trust every word this guy is saying.
He’s pulling out more axles than I ever would’ve thought existed lmao
Dude knows every aftermarket part ever created for the scx24 lmao
I'm one of those "doesnt really know what I'm doing", as I'm just getting into RC builds, so this was super informative! Awesome that you gave your honest opinion, pros & cons of each axle. Always looking forward to your IG and now YT content!
Doing the same 6x6 build as you. Just got the mazz axles in for it too. Can't wait see what body you do. Definitely my new favorite channel. Keep up the awesome work man!
Liking your approach to these videos and your crawler areas are dope dude! Keep it up! 🤙
Good Job dude! Love your builds. Were you unable to adjust the angle of the RCAWD axle through the links to get a better pinion angle?
Thanks man. Yeah I adjusted them as much as I could and still no luck, they said it was a known issue and it was being addressed.
That’s how yah make an informational video !!!! No b.s. and tells it like it is ! Been lookin at crawlers and this definitely helps !!!
Funny because the meus are what I chose for my first custom scx24 build, stay tuned for the build series on my channel once the axles and carbon chassis arrives :)
I actually bought these axles becuase i saw them on your insta when u showed the playmobil porsche body and i asked what axkes those were and u replied instantly, thank u again im so glad i went with them because im fairly new the the hoddy and they were pretty much stress free to install!
Glad I could help!
Sooo dry its impressive how you keep it up without breaking character. For the record I don't have to do my axle video now. Agree 100%.....s8 portals was the only newbie to me and yup I'm jealous because I thought I had them all....how much you want punk?🤬
You crack me up 😂😂and also really enjoy the content. Extremely helpful especially for someone not very advanced in the hobby yet. Thanks appreciate ya bro
Glad I could help!
Thanks for everything you share. We appreciate you.
ive been wanting the meus axles for a minute now for my c10, seen a guy at my LHS with them and the steering angle is insane as well as appearance. subbed
Another killer video, 1K + subscribers, killing it.
How many cars do you have... i can't imagine, and 35 axles, dang...
Keep it real..."peace"
34 sets of super 8s. I need to work on my hobby savings haha. Awesome video keep it up!
I may have exaggerated a bit. Just an estimate 😉
@@24Yepp I figured it was a little exaggerated but you still have one hell of a wall of awesome builds.
Fyi: the MoFo axles are scx24 in the diff and based on trx4m on the ends. Stong and reduced gearing👍
Also: exo rc has titanium s8 axles. No need for outer bearing in axle housing and allows for same if not more turning radius than isokinetics. My new fav as they give less play/slop
Yes, these my man^! Troy!!
Universals will give almost the same as miles iso on a modified stick width axle.
Next video needs to be on the hat collection! Mann every video new hat 🧢 keep it up bro your videos are 🔥🔥🔥
Honestly I love Super 8 but mofo X15 is a rock solid I've never broke a Super 8 housing I have broke axle shafts from Exo but I believe the X-15 are probably my favorite and then treal
Subscribed because your video doesn’t suck. Please continue to do this.
@@user-ji8ls9dr9f got it.
Man.. I enjoy this content. Keep up the awesome work and videos 🤙🏼. Now I need new axles 😂
killing it with the daily uploads sir!
Gonna have to sit down and thoroughly watch this and take some notes for the design of the....
X15s are basicly a trx4m axle with scx24 worm gears and link locations. You can use trx4m hubs and cvds in them. The v2 version now uses stock scx24 mounting hardware.
your on 🔥 keep dropping them vids
So much help!
Yo dude, love your approach to your video's 😎👍I am quite new to this 24 scale crawler game. My first set of axles was the Meus isokinetic one's you feature at the end😎👍since seeing my new rig, my son has been really wanting a similar rig, now, before I managed to discover this awesome video you posted, I bought a set of OGRC axles for my son's rig, they boasted a 43° full lock angle on the steering (with CVD's to make this huge angle work), overdrive on the front axle etc etc..... when I received the axles, firstly the part on the front axle that mates to the centre shaft won't fit (it's much too big) then secondly it would seem that the actual joint on the CVD's won't actually fit in the given space between the C knuckle and the end of the axle, then thirdly the steering link is that tight that I'm not sure it would reach that massive steering angle without damaging the servo, so they are pretty much scrap in my eyes...... since my discovery on how poor these OGRC axles actually are, I ordered my boy a set of Meus racing isokinetic axles for his rig. These OGRC one's are really pathetic..... I'm wondering, have you had many OGRC parts? How would you rate them? Do you know of any way to fix these things? or am I pissing in the wind? I have asked OGRC for a refund, they don't seem to want to reply to what I've written, lol, it may be worth trying to warm other crawler enthusiasts about these terrible items so nobody else ends up with egg on their faces like I have🤷♂️
In my experience, a lot of the chinese style companies are hit or miss. It seems like 1 out of every 10 products has some type of issue. I havn't had any problems but plenty of other people have. Random stuff missing, bad quality control, etc... Customer service I'm also unsure of. I do have some ogrc axles and I don't have a problem with them
Thanks for the reply dude...... I don't think I'll be bothering with OGRC again.
Heres to 1 mil subs🎉
Awesome info!!!
Congrats on the 1000 subs brother
❤
This was hilarious and very informative 🤙🏽
I built a 6x6 meus truck. Nightmare if you use bigger tires. I made a single cab axial power wagon with wood bed. Link mounting options could be better. Mounting plates for electronics could be better
I learned the hard way with these meus axles…. The hardware absolutely sucks. They snap off in the link threads. Luckily, they sent me a new front axle. I drilled the threads out and I have them held in with a nut instead of relying on the built-in axle thread. There is a noticeable difference in clearance between these and my little guy racing parts super eights.
I think since this video I've been having the best luck with upgraded stock axles
I LOVE YOUR VIDEOS! Please keep them coming.
It would be super helpful to provide links to some of these
The Meus iso axles are pretty dam sweet my faves as well ! The only drawback I have found and it is a big one unfortunately is the black axles servo mount holes are very tight from the paint or anodizing ? Many have mentioned stripping or breaking the soft screws that come with these. I even gently piloted the holes on the servo mounts but still managed to break one screw inside a servo mount hole. They need to cover these holes during the paint or anodizing process and maybe include some stainless screws : ) Now I want a set of the Nylon axles lol !
Let’s gooo congrats bro!!🎉🥳🍻
Thank you for another great video!
Great video! Extremely helpful, care to share what wheel nut tool that was? I'm looking for a better one than the stupid cross tool.
Yep!!! Another great vid bro, way to rock the CZcams!!! 👍👍👍
Yeehaa, this is what I like🎉. Lets watch !! 0:22
Just ordered the Injora Axles in black for my trx4m k10. How long have you been messing with crawlers? You seem to have quite the collection.
Mine multiplied pretty quick... A little under a year
Another helpful video, peace ✌️
Fuegz and informative as usual
Tanks!
You can use 4M Knuckles on them
Im lmfao tryna educate myself at the same time
That's so cool bro to see you got monetized so you overlooked a really good portal axle treal
Unfortunately I didnt have any to show 😔 I've never tried the treal portals
DUDE, what do you do for a living???
Tire shop worker 😉
Would love to try the super 8s.....but there never in stock!!
Grats on 1K! Question: planning a build with cheat code v2 and super 8s. Can I use a mix of c10 front and deadbolt rear injora links or do I need to get custom links for those axles?
Thanks! I'm not sure off the top of my head, I'd have to be sitting there messing with it. I would guess if they are the injora links that have threaded ends it might work because you could rotate them a bit as needed for adjustments. Again, I have no idea though
@@24Yepp cheers! Now to score me some super 8s. Always sell out quick.
Mazz links. What you’re describing is the c bolt setup. Mazz links have angled rod ends which help with the siper 8 mount width.
@@maxwell5428 thanks 👍
@24yep did we miss the OGRC axles? Curious where those fit in the hierarchy of axles.
@@TrailBound51 They are comparable to the injora metal ones. I havn't had any issues with them and they seem to work fine 🤷🏼♂️
Iv had treal protal axeils and i like them but for the price idk rather have meus and im not crazy about protals just asd more shit to brake
Appreciate the informative video!
X15 axles: can use TRX4M weighted knuckles, maybe very minimal adjustment. Also, they should come with 4mm axle nuts to use the same T wrench for your other axles. Does anyone know if X15s will share diff covers with Super 8? Look similar.
Thanks for the info!
🎉🎉🎉🎉🎉🎉🎉🎉thank you.
You have....
A very interesting way....
Of making videos....
Lol!
I want to smash my WPL tonight. One thing after another. Time to start scx24 buiild i think ? cheap way to start ?
Yep thanks know i know
✌️
Great video
RCAWD: *We know they suck, we're working on it*.... Well that's a brilliant and very modern business strategy. Happy to sell a bunch of crap units, see if anyone complains and if their enough backlash, THEN we'll design them to work. This is just gross. They just schit on people and don't give a phuck.
Thanks for being honest!!! More people like yourself need to be making videos.
awesome video though
I say Portals “BAD”
I think most people say that
Hello my friend!
Great content ...What portal axles are good?
Havn't had good luck with many of them. Treal makes a metal set. Mazz designs has a nylon set.
@@24Yepp right ... alot of stuff Is kinda poor quality
@@24Yepp fyi, the mazz nlyon are the same as the ogrc, mofo, meus and a few others. (all from the same factory) some come with dogbones and some with cvd.
@@TheShopMiniRC Yeah. I just like mazz, gotta support the boys
@@24Yepp 100%
I don't know of anybody knows this or not but that's mofo servo Mountain he's the one that come up with that Um and a lot of people have stoked that from him them are good axles the ISO they're really good I beat the hell out of them things I mean cranking big RPMs and have not broke them I did break up I did break a screw off in the steering link they sent me a knuckle I had to drill it out to get it working working but they did send me one to replace it it just got sent back because they didn't put the right address and that was just from cranking the servo back and forth the shift RC snapped It Off
thanks for the links🙄 1:23 especially when you speak so clearly. seriously, i have fucking clue what you said those were. 1:46 you never did say anything about them in the first place. 1:56 NO. wow really helpful. man this video is loaded with helpful info.
Huh?